• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.29-43
• /
• 2019

The calibration of microscopic traffic simulation models has received much attention in the simulation field. Although no standard has been established for it, a genetic algorithm (GA) has been widely employed in recent literature because of its high efficiency to find solutions in such optimization problems. However, the performance still falls short in simulation analyses to support fast decision making. This paper proposes a new calibration procedure using a dual GA and central composite design (CCD) in order to improve the efficiency. The calibration exercise goes through three major sequential steps: (1) experimental design using CCD for a quadratic response surface model (RSM) estimation, (2) 1st GA procedure using the RSM with CCD to find a near-optimal initial population for a next step, and (3) 2nd GA procedure to find a final solution. The proposed method was applied in calibrating the Gipps car-following model with respect to maximizing the likelihood of a spacing distribution between a lead and following vehicle. In order to evaluate the performance of the proposed method, a conventional calibration approach using a single GA was compared under both simulated and real vehicle trajectory data. It was found that the proposed approach enhances the optimization speed by starting to search from an initial population that is closer to the optimum than that of the other approach. This result implies the proposed approach has benefits for a large-scale traffic network simulation analysis. This method can be extended to other optimization tasks using GA in transportation studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.667-675
• /
• 2021

The purpose of this study is as follows: First, to analyze the spatial structure of Jeju by analyzing the rate of parking demand and supply; Second, to determine the parking service imbalance between regions; and third, to elucidate the causes of this spatial structural parking service imbalance and provide effective measures. Due to the rapid population and tourism growth, Jeju is suffering from traffic congestion and serious parking problems. For this, the ways to efficiently utilize the existing parking spaces were identified through spatial structure analysis based on the parking demand and supply in the Jeju area. As short-term policy, the following changes were proposed: switching to small-scale eup or myeon blocks of parking space, use of shared parking system, and repairing side streets in residential areas. As mid-to-long-term policy, it is linked to other means of transportation as follows: parking demand management policy through modal share by reorganizing public transportation routes or expanding traffic facilities; securing park-and-ride lots; and different parking pricing for different time periods. To implement these policies, each area of the public sector, private sector, and private-public partnership should develop the bond of sympathy by areas and participants.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.139-149
• /
• 2010

Internet was designed for network scalability and best-effort service which makes all hosts connected to Internet to be vulnerable against attack. Many papers have been proposed about attack detection algorithms against the attack using IP spoofing and DoS/DDoS attack. Purpose of DoS/DDoS attack is achieved in short period after the attack begins. Therefore, DoS/DDoS attack should be detected as soon as possible. Attack detection algorithms using false alarm rates consist of the false negative rate and the false positive rate. Moreover, they are important metrics to evaluate the attack detections. In this paper, we analyze the performance of the attack detection algorithms using the impact of false negative rate and false positive rate variation to the normal traffic and the attack traffic by simulations. As the result of this, we find that the number of passed attack packets is in the proportion to the false negative rate and the number of passed normal packets is in the inverse proportion to the false positive rate. We also analyze the limits of attack detection due to the relation between the false negative rate and the false positive rate. Finally, we propose a solution to minimize the limits of attack detection algorithms by defining the network state using the ratio between the number of packets classified as attack packets and the number of packets classified as normal packets. We find the performance of attack detection algorithm is improved by passing the packets classified as attacks.

• Journal of Intelligence and Information Systems
• /
• v.26 no.2
• /
• pp.131-145
• /
• 2020

In line with the trend of industrial innovation, IoT technology utilized in a variety of fields is emerging as a key element in creation of new business models and the provision of user-friendly services through the combination of big data. The accumulated data from devices with the Internet-of-Things (IoT) is being used in many ways to build a convenience-based smart system as it can provide customized intelligent systems through user environment and pattern analysis. Recently, it has been applied to innovation in the public domain and has been using it for smart city and smart transportation, such as solving traffic and crime problems using CCTV. In particular, it is necessary to comprehensively consider the easiness of securing real-time service data and the stability of security when planning underground services or establishing movement amount control information system to enhance citizens' or commuters' convenience in circumstances with the congestion of public transportation such as subways, urban railways, etc. However, previous studies that utilize image data have limitations in reducing the performance of object detection under private issue and abnormal conditions. The IoT device-based sensor data used in this study is free from private issue because it does not require identification for individuals, and can be effectively utilized to build intelligent public services for unspecified people. Especially, sensor data stored by the IoT device need not be identified to an individual, and can be effectively utilized for constructing intelligent public services for many and unspecified people as data free form private issue. We utilize the IoT-based infrared sensor devices for an intelligent pedestrian tracking system in metro service which many people use on a daily basis and temperature data measured by sensors are therein transmitted in real time. The experimental environment for collecting data detected in real time from sensors was established for the equally-spaced midpoints of 4×4 upper parts in the ceiling of subway entrances where the actual movement amount of passengers is high, and it measured the temperature change for objects entering and leaving the detection spots. The measured data have gone through a preprocessing in which the reference values for 16 different areas are set and the difference values between the temperatures in 16 distinct areas and their reference values per unit of time are calculated. This corresponds to the methodology that maximizes movement within the detection area. In addition, the size of the data was increased by 10 times in order to more sensitively reflect the difference in temperature by area. For example, if the temperature data collected from the sensor at a given time were 28.5℃, the data analysis was conducted by changing the value to 285. As above, the data collected from sensors have the characteristics of time series data and image data with 4×4 resolution. Reflecting the characteristics of the measured, preprocessed data, we finally propose a hybrid algorithm that combines CNN in superior performance for image classification and LSTM, especially suitable for analyzing time series data, as referred to CNN-LSTM (Convolutional Neural Network-Long Short Term Memory). In the study, the CNN-LSTM algorithm is used to predict the number of passing persons in one of 4×4 detection areas. We verified the validation of the proposed model by taking performance comparison with other artificial intelligence algorithms such as Multi-Layer Perceptron (MLP), Long Short Term Memory (LSTM) and RNN-LSTM (Recurrent Neural Network-Long Short Term Memory). As a result of the experiment, proposed CNN-LSTM hybrid model compared to MLP, LSTM and RNN-LSTM has the best predictive performance. By utilizing the proposed devices and models, it is expected various metro services will be provided with no illegal issue about the personal information such as real-time monitoring of public transport facilities and emergency situation response services on the basis of congestion. However, the data have been collected by selecting one side of the entrances as the subject of analysis, and the data collected for a short period of time have been applied to the prediction. There exists the limitation that the verification of application in other environments needs to be carried out. In the future, it is expected that more reliability will be provided for the proposed model if experimental data is sufficiently collected in various environments or if learning data is further configured by measuring data in other sensors.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.84-91
• /
• 2011

Recently, WBAN(Wireless Body Area Network) which has progressed standardization based on IEEE 802.15.6 standardization is a network for the purpose of the short-range wireless communications within around 3 meters from the inner or outer human body. Effective QoS control technique and data efficient management in limited bandwidth such as audio and video are important elements in terms of users and loads in short-range wireless networks. In this paper, for high-speed WBAN IEEE 802.15.6 standard, the dynamic allocation to give an efficient bandwidth management and weighted fair queueing algorithm have been proposed through the adjustment of the super-frame about limited data and Quality of Service (QoS) based on the queuing algorithm. Weighted Fair Queueing(WFQ) Algorithm represents the robust performance about elements to qualitative aspects as well as maintaining fairness and maximization of system performance. The performance results show that the dynamic allocation expanded transmission bandwidth five times and the weighted fair queueing increased maximum 24.3 % throughput and also resolved delay bound problem.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.225-236
• /
• 1996

Computer simulation methods for three area of textile design, wearing, and design were developed by using CAD system, and its results were applied to pattern design simulation. Textile design created by using the CAD system was applied to T-shirt schematization. Created wearing, printing, and knitting design respectively were applied to women clothing, children's wear, and men sweater. In this rearch, several equipped since various color working, materials, pattern development and swift intention decision of goods direction are possible on the moniter. Third, many goods order are rushed within short time because spot direction are possible on the moniter. Third, many goods order are rushed within short time because intention decision of buyer could be induced and embodied design almost reflection the buyer's will on the spot before production of goods and samples. Forth, time and expense were saved to get the information in terms of design information systematically and could be managed annually. Fifth, creative design development can be not only availed but saved the service expense of outside orders and the traffic expense.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.2
• /
• pp.45-56
• /
• 2021

In platoon driving, several autonomous vehicles communicate to exchange information with each other and drive in a single cluster. The platooning technology has various advantages such as increasing road traffic, reducing energy consumption and pollutant emission by driving in short distance between vehicles. However, the short distance makes it more difficult to cope with an emergency accident, and accordingly, it is difficult to ensure the safety of platoon driving, which must be secured. In particular, the unexpected situation, i.e., variability that may appear during driving can adversely affect the safety of platoon driving. Because such variability is difficult to predict and reproduce, preparing safety guards to prevent risks arising from variability is a challenging work. In this paper, we studied a simulation method to avoid the risk due to the variability that may occur while platoon driving. In order to simulate safe platoon driving, we develop diverse scenarios considering the variability, design and apply safety guards to handle the variability, and extends the detail functions of VENTOS, an open source platooning simulator. Based on the simulation results, we have confirmed that the risks caused form the variability can be removed, and safe platoon driving is possible. We believe that our simulation approach will contribute to research and development to ensure safety in platoon driving.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.233-251
• /
• 2023

Metropolitan buses are managed as either a direct seat type or a metropolitan express type according to the 「Passenger Transport Service Act」. However, a management system that reflects the characteristics of metropolitan buses is not currently established. Therefore, in this study, the driving characteristics of metropolitan buses, dangerous driving behavior characteristics of metropolitan bus drivers, metropolitan bus accident characteristics, and the safety management system of domestic and foreign buses and other means were investigated. Through this, a plan for strengthening the safety management of metropolitan buses suitable for Korea was presented by dividing it into short-term and mid to long term. The short-term plan is a plan that can be carried out through consultation between metropolitan bus agencies and transportation companies, and the mid to long term plan is a plan that can be implemented only when related laws are revised. Through this study, it is expected to serve as an opportunity for in-depth discussions by the government, business operators, and related experts to strengthen the safety management of metropolitan buses.

• Atmosphere
• /
• v.34 no.2
• /
• pp.139-151
• /
• 2024

The Yeongdong region has suffered from severe snowstorms and the relevant damage such as traffic accidents on slippery roads, and the collapse of greenhouses and temporary buildings. While a lot of research on snowfall has been conducted, the detailed study of snow crystals' phase and habit through intensive observations and the relevant microphysical analysis is still lacking. Therefore, a snowflake camera, PARSIVEL, and intensive radiosonde soundings were utilized to investigate phase and habit changes in solid precipitation. Two remarkable episodes of phase and habit changes were selected such as 19 March 2022 and 15 February 2023. Both events occurred in the synoptic condition of the High in the north and the Low passing by the south, which was accompanied by rapid temperature cooling below 2.5 km. During the events of a short period between 3 to 6 hours, the temperature at 850 hPa decreased by about 4 to 6℃. This cooling led to a change in the main habit of snow particles from riming to aggregate, identified with both MASC and PARSIVEL. Meanwhile, the LDAPS model analyses do not successively represent the rapid cooling and short-term variations of solid precipitation, probably by virtue of overestimating low-level equivalent potential temperature during these periods. The underlying causes of these the low-level temperature variations within 6 hours, still remain unclear. It might be associated with mesoscale orographic phenomenon due to the mountains and East Sea effects, which certainly needs an intensive and comprehensive observation campaign.

• Journal of Environmental Impact Assessment
• /
• v.4 no.3
• /
• pp.27-29
• /
• 1995

Within regional and municipal planning we are using several levels or types of EIA in the city of Dresden. Some of these types, practical aspects and some experiences of our work will be presented in this contribution. Firstly I may introduce you to some general conditions for your better understanding of our principles of work. Surely you know about. the destruction of the political and economical structures in Eastern Germany since 1989. Until today our not quite simple task is to build up new ones. At the same time people were in great expectation of freedom and high standard of living as soon as possible. Economical difficulties increased in association with the breakdown of the market in Eastern Europe. How to rebuild industrial estatements and how to renew the traffic systems? We had to find answers to all these complex question. Should we only repair the former damages or could we reach a really environmental sound production for the future? The demand for a rapid economic growth is an incredible challenge for the application of new environmental ideas. I am truly not sure whether you know the city of Dresden or not. So I would like to give you a short introduction. Dresden is situated in a valley shaped by the river Elbe. There live about 500,000 people. Dresden has a great reputation for arts and sciences. Its also well know as a town of high technology industries such as electronics and optics. We restored the power plant and therefore we don't need any atomic power plants actually we haven't got one. Since 1990 there were founded many official agencies in Dresden because it is the capatal of Saxony. Considering nature and environment we there is a large forest area called "Dresdner Heide". The river Elbe and the meadows are situated on both sides of the river. There are a lot of green and free places in the city area too. Furtheron there is something unusual for a large city: about 50% of the drinking water resources mostly take place within the city itself. The origin is the ground water as well as water from the river Elbe after filtration of course.