• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.1
• /
• pp.5-14
• /
• 2003

Principles of a novel pulse growing method are described. The method realized in the crystal growing on a seed from melts under raw melt feeding provided a more reliable control of the crystallization process when producing large alkali halide crystals. The slow natural convection of the melt in the crucible at a constant melt level is intensified by rotating the crucible, while the crystal rotation favors a more symmetrical distribution of thermal stresses over the crystal cross-section. Optimum rotation parameters for the crucible and crystal have been determined. The spatial position oi the solid/liquid phase interface relatively to the melt surface, heaters and the crucible elements are considered. Basing on that consideration, a novel criterion is stated, that is, the immersion extent of the crystallization front (CF) convex toward the melt. When the crystal grows at a <> CF immersion, the raised CF may tear off from the melt partially or completely due to its weight. This results in avoid formation in the crystal. Experimental data on the radial crystal growth speed are discussed. This speed defines the formation of a gas phase layer at the crystal surface. The layer thickness il a function of time a temperature at specific values of pressure in the furnace and the free melt surface dimensions in the gap between the crystal and crucible wall. Analytical expressions have been derived for the impurity component mass transfer at the steady-state growth stage describing two independent processes, the impurity mass transfer along the <> path and its transit along the <> one. The heater (and thus the melt) temperature variation is inherent in any control system. It has been shown that when random temperature changes occur causing its lowering at a rate exceeding $0.5^{\circ}C/min$, a kind of the CF decoration by foreign impurities or by gas bubbles takes place. Short-term temperature changes at one heater or both result in local (i.e., at the front) redistribution of the preset axial growth speed.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.16-23
• /
• 2020

In High-Intensity Focused Ultrasound (HIFU) treatment, effective localization of HIFU focus is important for developing a safe treatment plan. While Magnetic Resonance Imaging guided HIFU (MRIgHIFU) can visualize the ultrasound path during the treatment for localizing HIFU focus, it is challenging in ultrasound imaging guided HIFU (USIgHIFU). In the present study, a real-time ultrasound beam visualization technique capable of localizing HIFU focus is presented for USIgHIFU. In the proposed method, a short pulse, with the same center frequency of an imaging ultrasound transducer below the regulated acoustic intensity (i.e., Ispta < 720 mW/㎠), was transmitted through a HIFU transducer whereupon backscattered signals were received by the imaging transducer. To visualize the HIFU beam path, the backscattered signals underwent dynamic receive focusing and subsequent echo processing. From in vitro experiments with bovine serum albumin gel phantoms, the HIFU beam path was clearly depicted with low acoustic intensity (i.e., Ispta of 94.8 mW/㎠) and the HIFU focus was successfully localized before any damages were produced. This result indicates that the proposed ultrasound beam path visualization method can be used for localizing the HIFU focus in real time while minimizing unwanted tissue damage in USIgHIFU treatment.

• Journal of East-West Nursing Research
• /
• v.4 no.1
• /
• pp.7-20
• /
• 1999

Operation usually brings about psychological stress as well as physical stress to the patient and it greatly influences the maintenance of the homeostasis. Until now, most of the nursing research concerning the anxiety of the patient undergoing an operation has been done while the patient was under general anesthesia. Under local anesthesia, the anxiety of the patient who undergone operation is short. However, there is much demand of the operational nurses to mediate between the patient who is undergoing operation when fully conscious, as they are aware of the patient's anxiety and to decrease the patient's anxiety of this local anesthesia. Therefore, this research tries to verify the effects of the Hand-holding program on the anxiety of the operational patient undergoing local anesthesia and affirms the role of the nursing intervention. As an unequivalent control group non-synchronized designs, this research selects out 20 control groups and 21 experimental groups at random who have received cataract operation while under local anesthesia and after implementing the Hand-holding program to the experimental groups while undergoing the operation, the effect of the experiment was observed. By observing the Epinephrine, Cortisol, blood pressure, and pulse for the physical indexes before and after the enforcement of the hand-holding, and using the measurement of Speilberger(1972) for the psychological indicators for the anxiety of the patient before and after hand-holding, the results were analyzed through SAS program. As a results, intervention of hand-holding had a remarkable effect to decrease the anxiety felt by the patient and the diastolic blood pressure also was effectively decreased. On the other hand, through the decrease of the systolic blood pressure was also observed, it was not statistically significant. In the Epinephrine and Cortisol indicators, the intervention of hand-holding was revealed to have an insignificant effect. The Hand-holding was revealed to have an indicators, the intervention of Hand-holding was revealed to have an insignificant effect. The Hand-holding program may be said to have an effect which decreases the psychological anxiety of the patient undergoing local anesthesia.

• Journal of Oriental Neuropsychiatry
• /
• v.12 no.2
• /
• pp.103-122
• /
• 2001

The clinical study was carried out the 58 patients with Headache who were treated in Department of Neuropsychiatry, College of Oriental Medicine, Dae Jeon University from 14 October 1999 to 15 October 2001. The results were summarized as follows. 1. The ratio of male and female was 15:43, 40s(36.2%) was frequent, the ratio of Tension headache and Migraine was 43:12, hypernoia and overwork oneself were the most inducing factor. 2. In distribution of the period of the clinical history, Tension headache was comparatively short term within 1 month(62.8%) and Migraine was comparatively long term over 1 year(91.7%), Tension headache was frequent at whole portion(41.3%) and occipital portion(26.1%), Migraine was frequent at temporal portion(76.9%). 3. In pain type, Tension headache has many vandlike discomport type, Migraine has many pulsatile type, neck-stiffness-pain and dizziness were mainly coexited. 4. Toung aspect has many SULDAMHONGTAEBAEKHOO(舌淡紅苔白厚), GINMAEK(緊脈) and HEUNMAEK(弦脈) were frequent in Pulse type, the GAEDAMSUNKIJEETONG(祛淡順氣止痛) prescription drugs were frequent such as GEYNTONGA(肩痛A), GEYNTONGDODAMTANG(?通導淡湯), Tension headache patients were well treated(90.7%). 5. In Tension headache and Migraine, the Curve has many SL except Tension headache‘s 2th SANGHAN(상한), in Regulation RR was frequent at 1th, 2th, 3th, 4th, 7th SANGHAN and RL was frequent at 5th, 6th SANGHAN, the result of Graph, Activity and Reactivity have many low response at the whole. 6. The Curve was within normal limit at whole portion and frequent SL at temporal portion, the whole and temporal portion s Regulation also have many RR at 1th, 2th, 3th, 4th, 7th SANGHAN and RL at 5th, 6th SANGHAN, Activity and Reactivity have many low response at the whole. 7. The occipital and frontal portion‘s Curve have many SL at 1th SANGHAN, the occipital portion’s Regulation has many RR at 1th, 2th, 4th, 7th SANGHAN and RL at 5th, 6th SANGHAN, Activity has many low response at the whole, Reactivity has many low response at 1th, 4th, 5th, 6th SANGHAN and high response 2th, 3th SANGHAN, the frontal portion s Regulation has many RL at 1th, 3th, 5th, 6th, 7th SANGHAN and RR at 4th SANGHAN, Activity and Reactivity also have many low response at the whole except 6th, 7th SANGHAN respectively.

• The Korean Journal of Emergency Medical Services
• /
• v.14 no.3
• /
• pp.71-81
• /
• 2010

Purpose: To minimize an interruption in chest compression, reduce the hands-off time, the American Heart Association has recommended the ratio of chest compression to ventilation ratio to 30:2 from 2005 CPR guideline to 2010 CPR guideline. However, current studies have shown that the hands-off time was > 10 seconds with that method. For this reason, we devised new CPR method that a ventilation to chest compression ratio of 2:30 to reduce pt assessment time and skipped the assessment step of carotid artery pulse would be a more effective way to reduce the hands-off time & the time to set the CPR. According to the more detailed purpose are listed below. 1) We would like to confirm efficiency of a ventilation to chest compression ratio of 2:30 than a chest compression to ventilation ratio of 30:2 to reduce the hands-off time & the time to set the CPR. 2) We would like to evaluate possibility of increasing for chest compression accuracy of a ventilation to chest compression ratio of 2:30 than a chest compression to ventilation ratio of 30:2 3) We would like to evaluate possibility of increasing for ventilation accuracy of a ventilation to chest compression ratio of 2:30 than a chest compression to ventilation ratio of 30:2 Methods: According to 2005 American Heart Association Guidelines, 60 paramedic students(20 students X freshmen, sophomore, junior) performed 5 cycles of 3~ chest compressions : 2 ventilations after A, B, C evaluation with Laerdal Resusci R Anne SkillReporters. After 5 minutes rest, the 60 students performed 5 cycles of 2 ventilations : 30 chest compressions after A, B evaluation with the manikins between 13 and 17 September 2010. The short reports including speed & accuracy of chest compression, respiratory, CPR cycle were gained from the manikins. Hands-off times were measured by assistants. Results: Recently, the importance of high quality CPR was emphasized in order to perform the CPR faster and more accurate. To find out improving the conventional CPR method, we switch the procedure of the compression and the ventilation. By switching the procedure back and forth, we are able to compare the effectiveness of CPR between two type of CPR method which are 2:30 and 30:2 methods. 2:30 is that the breaths is delivered twice, first and perform 30 compressions while 30:2 perform 30 compressions first and give 2 breaths followed by the ABC method. Also, we verify the effectiveness of the hands off time, compression accuracy of the compression through the comparison of the two procedure as mentioned earlier. Consequently research verified that 2:30 is the efficient by providing faster set up delivering more accurate chest compression. Conclusion: 2:30 can minimize a time delay from cardiac standstill until starting the chest compression. In addition, hands-off time which is an interruption in chest compression can be shortened by 2:30 method, which result to effective oxygenation of coronary artery & maintenance of the bloodstream. Once again, performing the 2:30 method provide lessen hands off time and increase the accuracy of the chest compression.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.5
• /
• pp.426-431
• /
• 2007

When a high-energy ultrasound propagates through a solid body that contains a crack or a delamination, the two faces of the defect do not ordinarily vibrate in unison, and dissipative phenomena such as friction, rubbing and clapping between the faces will convert some of the vibrational energy to heat. By combining this heating effect with infrared imaging, one can detect a subsurface defect in material in real time. In this paper a realtime detection of the brazing defect of thin Inconel plates using the UIR (ultrasonic infrared imaging) technology is described. A low frequency (23 kHz) ultrasonic transducer was used to infuse the welded Inconel plates with a short pulse of sound for 280 ms. The ultrasonic source has a maximum power of 2 kW. The surface temperature of the area under inspection is imaged by an infrared camera that is coupled to a fast frame grabber in a computer. The hot spots, which are a small area around the bound between the two faces of the Inconel plates near the defective brazing point and heated up highly, are observed. And the weak thermal signal is observed at the defect position of brazed plate also. Using the image processing technology such as background subtraction average and image enhancement using histogram equalization, the position of defective brazing regions in the thin Inconel plates can be located certainly.

• Journal of Biomedical Engineering Research
• /
• v.24 no.3
• /
• pp.217-231
• /
• 2003

Coded excitation with complementary Golay sequences is an effective means to increase the SNR and penetration of ultrasound imaging. in which the two complementary binary codes are transmitted successively along each scan-line, reducing the imaging frame rate by half. This method suffers from low frame rate particularly when multiple transmit focusing is employed, since the frame rate will be further reduced in proportion to the number of focal zones. In this paper. a new ultrasound imaging technique based on simultaneous multiple transmit focusing using modified orthogonal Golay codes is proposed to improve lateral resolution with no accompanying decrease in the imaging frame rate, in which a pair of orthogonal Golay codes focused at two different focal depths are transmitted simultaneously. On receive, these modified orthogonal Golay codes are separately compressed into two short pulses and individually focused. These two focused beams are combined to form a frame of image with improved lateral resolution. The Golay codes were modified to improve the transmit power efficiency (TPE) for practical imaging. Computer simulations and experimental results show that the proposed method improves significantly the lateral resolution and penetration of ultrasound imaging compared with the conventional method.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.8
• /
• pp.444-451
• /
• 2016

Most research on membrane fouling models in the past are based on theoretical equations in lab-scale experiments. But these studies are barely suitable for applying on the full-scale spot where there is a sequential process such as filtration, backwash and drain. This study was conducted in submerged membrane system which being on operation auto sequentially and treating wastewater from G-water purification plant in Incheon. TMP had been designated as a fouling indicator in constant flux conditions. Total volume of inflow and SS concentration are independent variables as major operation parameters and time-series analysis and prediction of TMP were conducted. And similarity between simulated values and measured values was assessed. Final prediction model by using genetic algorithm was fully adaptable because simulated values expressed pulse-shape periodicity and increasing trend according to time at the same time. As results of twice validation, correlation coefficients between simulated and measured data were $r^2=0.721$, $r^2=0.928$, respectively. Although this study was conducted limited to data for summer season, the more amount of data, better reliability for prediction model can be obtained. If simulator for short range forecast can be developed and applied, TMP prediction technique will be a great help to energy efficient operation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.421-432
• /
• 2020

This paper proposes a 2-kW solid-state power amplifier (SSPA) developed by employing power amplifier pallets designed using gallium-nitride high electron mobility transistors, which is used in S-band military radars and to replace existing traveling-wave tube amplifier (TWTA). The SSPA consists of a high-power amplifier module, which combines eight power amplifier pallets, a drive amplifier module, a digital control module, and a power supply unit. First, the amplifier module and component were integrated into a small package to account for space limitations; next, an on-board harmonic filter was fabricated to reject spurious components; and finally, an auto gain control system was designed for various duty ratios because recent military radar systems are all active phase radars using the pulse operation mode. The developed SSPA exhibited a max gain of 48 dB and an output power ranging between 63-63.6 dBm at a frequency band of 3.1 to 3.5 GHz. The auto gain control function showed that the output power is regulated around 63 dBm despite the fluctuation of the input power from 15-20 dBm. Finally, reliability of the developed system was verified through a temperature environment test for nine hours at high (55 ℃) / low (-40℃) temperature profile in accordance with military standard 810. The developed SSPA show better performance such as light weight, high output, high gain, various safety function, low repair cost and short repair time than existing TWTA.

• Animal cells and systems
• /
• v.2 no.4
• /
• pp.483-488
• /
• 1998

We previously found that a potent gonadotropin-releasing hormone (GnRH) agonist, buserelin, decreases GnRH promoter activity together with GnRH mRNA level, providing evidence for an autoregulatory mechanism operating at the level of GnRH gene transcription in immortalized GT1-1 neuronal cells. To examine whether agonist-induced decrease in GnRH mRNA level requires the continuous presence of buserelin, we performed a pulse-chase experiment of buserelin treatment. Short-term exposure (15 min) of GT1-1 neuronal cells to buserelin ($10{\mu}M$) was able to decrease GnRH mRNA levels when determined 24 h later. When GT1-1 cells were treated with buserelin ( $10{\mu}M$) for 30 min and then incubated for 1, 3, 6, 12, 24, and 48 h after buserelin removal, a significant decrease in GnRH mRNA levels was observed after the 12 h incubation period. These data indicate that inhibitory signaling upon buserelin treatment may occur rapidly, but requires a long time (at least 12 h) to significantly decrease the GnRH mRNA level. To examine the possible involvement of de novo synthesis and/or mRNA stability in buserelin-induced decrease in GnRH gene expression, actinomycin D ($5{\mu}m/ml$), a potent RNA synthesis blocker, was co-treated with buserelin. Actinomycin D alone failed to alter basal GnRH mRNA Revel, but blocked the buserelin-induced decrease in GnRH mRNA level at 12 h of post-treatment. These data suggest that buserelin may exert its inhibitory action by altering the stability of GnRH mRNA. Moreover, a polvsomal RNA separation by sucrose gradient centrifugation demonstrated that buserelin decreased the translational efficiency of the transcribed GnRH mRNA. Taken together, these results clearly indicate that GnRH agonist buserelin acts as an inhibitory signal at multiple levels such as transcription mRNA stability, and translation.