• 한국항행학회논문지
• /
• 제12권2호
• /
• pp.146-153
• /
• 2008

UWB(Ultra Wide-Band)통신 기술은 매우 짧은 펄스를 사용하기에 정밀한 동기 획득 제어가 필요하다. 고속 W-PAN 응용이나 저속 무선측위 응용 모두를 위해 정확한 UWB 신호의 동기 획득(Signal Acquisition)은 매우 중요하다. 본 논문에서는 UWB 다중경로 채널 환경에서 동기 획득을 위해 두 단계 신호 탐색기법을 이용하여 동기 획득 알고리즘을 제안한다. 첫 번째 단계는 수신된 신호전체 시간을 두고 탐색 구간을 절반으로 나눠 각각 나눠진 창의 전력 값의 합을 비교하여 더 큰 전력 값을 가지는 구간을 다음 탐색 창으로 잡는다. 이러한 과정을 반복하여 다음 탐색 창을 구한다. 비교된 값이 임계값을 넘을 때까지 탐색을 반복한다. 두 번째 단계에서는 첫 번째 단계에서의 구해진 탐색 창을 Fine Search 하기 위하여 Linear 탐색 알고리즘을 적용하여 검색한다. 이 제안 알고리즘을 UWB 다중경로 채널 환경에서 모의실험 결과 병렬 탐색 알고리즘에 비해 고속 동기 획득이 가능하고 SNR의 변화가 심한 환경에 적합한 특성을 확인하였다.

• 한국재료학회지
• /
• 제27권11호
• /
• pp.590-596
• /
• 2017

We demonstrated a CNT synaptic transistor by integrating 6,6-phenyl-C61 butyric acid methyl ester(PCBM) molecules as charge storage molecules in a polyimide(PI) dielectric layer with carbon nanotubes(CNTs) for the transistor channel. Specifically, we fabricated and compared three different kinds of CNT-based synaptic transistors: a control device with $Al_2O_3/PI$, a single PCBM device with $Al_2O_3/PI:PCBM$(0.1 wt%), and a double PCBM device with $Al_2O_3/PI:PCBM$(0.1 wt%)/PI:PCBM(0.05 wt%). Statistically, essential device parameters such as Off and On currents, On/Off ratio, device yield, and long-term retention stability for the three kinds of transistor devices were extracted and compared. Notably, the double PCBM device exhibited the most excellent memory transistor behavior. Pulse response properties with postsynaptic dynamic current were also evaluated. Among all of the testing devices, double PCBM device consumed such low power for stand-by and its peak current ratio was so large that the postsynaptic current was also reliably and repeatedly generated. Postsynaptic hole currents through the CNT channel can be generated by electrons trapped in the PCBM molecules and last for a relatively short time(~ hundreds of msec). Under one certain testing configuration, the electrons trapped in the PCBM can also be preserved in a nonvolatile manner for a long-term period. Its integrated platform with extremely low stand-by power should pave a promising road toward next-generation neuromorphic systems, which would emulate the brain power of 20 W.

• 한국광학회지
• /
• 제10권5호
• /
• pp.424-429
• /
• 1999

본 연구는 XeCl 레이저를 펌핑원으로 사용하여 파장 616nm, 펄스폭 106 ps의 분포궤환 색소레이저(DFDL)의 발진과 증폭특성을 측정하였다. 소광장치를 구성하여 얻은 DFDL 단일펄스의 효과적인 증폭을 위해 3단 증폭기를 사용하였다. 증폭기I,II는 전치증폭단으로서 이득길이 5 nm, 10 nm의 색소셀에 농도6$\times$10-4 [mol/ι](용매: Methanol)의 Rhodamine 610을 이득매질로 사용하였다. 증폭기 I은 2%의 ASE 발생과 1 mJ 이상의 펌핑 에너지에서 10배의 포화증폭율을 가지며, 증폭기 II는 2.5 mJ 이상의 펌핑 에너지에서 single-pass 증폭을 통하여 28배의 포화증폭율과 함께 15%의 ASE 발생이 측정되었으며, 최적 증폭을 위해 회절격자를 이용한 ASE 제거와 double-pass 증폭을 수행하여 45배의 에너지 증폭율을 얻었다. 최종증폭단인 증폭기III은 상.하.좌.우의 위치에서 여기되는 Bethune 셀에 농도 3$\times$10-4 [mol/ι](용매:Ethanol)의 Rhodamine 610을 이득매질로 사용하였으며, single-pass 증폭, double-pass 증폭에서 각각 168.2 $\mu$J과 471$\mu$J의 출력에너지를 얻었다.

• 한국전자통신학회논문지
• /
• 제7권3호
• /
• pp.485-490
• /
• 2012

본 논문에서는 선박의 진동에 의하여 수명이 짧은 필라멘트를 사용하는 조명기구를 대체하기 위하여 선박용 LED 조명등 구동회로를 설계 및 구현하였다. 구동회로는 부피를 줄이고 비용을 절감하기 위하여 변압기가 없는 스위칭 회로로 설계되었다. 스위칭 회로는 입력 교류전압 220 V에 PWM 제어를 함으로써 안정적으로 LED를 구동할 수 있도록 설계하였다. 스위칭 회로의 펄스성 전류에 대하여 Valley-fill 방식의 역률 보상회로를 채용함으로써 역률를 개선하였다. 장기간 운항하는 선박에서의 조명등 교체 주기를 줄여 관리를 효율적으로 할 수 있도록 직병렬 배열로 LED 모듈 회로를 설계하여 LED의 일부가 손상되더라도 LED 모듈이 조명등 기능을 할 수 있도록 하였다. 개발한 구동회로를 포함한 조명기구는 전력소모와 역률이 각각 39 W, 0.925 로 선박 조명에 적합함을 확인하였다.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.360-362
• /
• 2002

Myocardial tagging technique such as spatial modulation of magnetization (SPAMM) allows the study of myocardial motion with high accuracy. Tagging contrast of such a tagging images can affect to the accuracy of the estimation of tag intersection in order to analyze the myocardial motion. Tagging contrast can be affected by tagline spacing. The aim of this study was to investigate the relationship between tagline spacing of SPAMM image and tagging contrast-to-noise ratio (CNR) experimentally. One healthy volunteer was undergone electrocardiographically triggered MR imaging with SPAMM-based tagging pulse sequence at a 1.5T MR scanner (Gyroscan Intera, Philips Medical System, Netherland). Horizontally modulated stripe patterns were imposed with a range from 3.6mm to 9.6mm of tagline spacing. Images of the left ventricle (LV) wall were acquired at the mid-ventricle level during cardiac cycle with FEEPI (TR/TE/FA=5.8/2.2/10). Tagging CNR for each image was calculated with a software which developed in our group. During contraction, tagging CNR was more rapidly decreased in case of short tagline spacing than in case of long tagline spacing. In the same heart phase, CNR was increased corresponding with tag line spacing. Especially, at the fully contracted heart phase, CNR was more rapidly increased than the other heart phases as a function of tagline spacing.

• 한국항공우주학회지
• /
• 제44권3호
• /
• pp.266-273
• /
• 2016

본 논문에서는 빠른 속도로 이동하는 비행체에 장착되는 명령수신기의 신호처리 기법에 대하여 제안한다. 명령수신기는 비행하는 동안 지상으로부터 전달되는 각종정보를 RF 링크를 통하여 수신해야 하므로 넓은 수신신호세기 영역을 확보해야하며. 또한 반송파 동기화 및 심볼 동기화 과정이 짧은 펄스열 구간 내에서 정밀하게 수행되어야 한다. 동기화 과정을 수행 후에는 약속된 시점에 심볼 및 비트결정을 통해 데이터를 획득함으로써 적용된 변복조방식의 이론적인 성능을 달성할 수 있다. 시험결과를 통해 본 논문에서 다룬 신호처리 기법이 비행체의 명령수신기에 효과적으로 적용될 수 있음을 확인한다.

• 한국정밀공학회지
• /
• 제27권10호
• /
• pp.29-33
• /
• 2010

UV laser micromachining of metallic materials has been used in microelectronic and other industries. This paper shows on experimental investigation of micromachining of copper using a 355nm UV laser with 50ns pulse duration. A finite element model with high strain rate effect is especially suggested to investigate the phenomena which are only dominated by mechanically pressure impact in disregard of thermally heat transfer. In order to consider the strain rate effect, Cowper-Symonds model was used. To analyze the dynamic deformation during a very short processing time, which is nearly about several tens nanoseconds, a commercial Finite Element Analysis (FEA) code, LS-DYNA 3D, was employed for the computational simulation of the UV laser micro machining behavior for thin copper material. From these computational results, depth of the dent (from one to six pulsed) were observed and compared with previous experimental results. This will help us to understand interaction between UV laser beam and material.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1998년도 추계학술발표 논문집
• /
• pp.225-229
• /
• 1998

The purpose of the current study was comparative analysis of autonomic and electrocortical responses to passive and active touch of the tektites with different subjective emotional preference. Perspective goal of the project is development of a template for classification of tactile stimuli according to subjective comfort and associated physiological manifestations. The study was carried out on 36 female college students. Physiological signals were acquired by Grass and B10PAC 100 systems with AcqKnowledge III software. Frontal, parietal and occipital EEG (relative power spectrum /percents/ of EEG bands - delta, theta, slow and fast alpha, low and fast beta), and autonomic variables, namely heart rate (HR), respiratory sinus arrhythmia (RSA), pulse transit time (PTT), respiration rate (RSP) and skin conductance parameters (SCL, amplitude, rise time and number of SCRs) were analyzed for rest baseline and stimulation conditions. Analysis of the overall pattern of reaction indicated that autonomic response to tactile stimulation was manifested in a form of moderate HR acceleration, RSP increase, RSA decrease (lowered vagal tone), decreased n and increased electrodermal activity (increased SCL, several SCRs) that reflects general sympathetic activation. Parietal EEG effects (on contra-lateral side to stimulated hand) were featured by short-term alpha-blocking, slightly reduced theta and significantly increased delta and enhanced fast beta activity with few variations across stimuli. The main finding of the study was that most and least preferred textures exhibited significant differences in autonomic (HR, RSP, PTT, SCR, and at less extent in RSA and SCL) and electrocortical responses (delta, slow and fast alpha, fast beta relative power). These differences were recorded both in passive and active stimulation modes, thus demonstrating reproducibility of distinction between most and least emotionally preferred tactile stimuli, suggesting influence of psychological factors, such as emotional property of stimulus, on physiological outcome. Nevertheless, development of sufficiently sensitive .and reliable template for classification of emotional responses to tactile stimulation based on physiological response pattern may require more extensive empirical database.

• Journal of Chest Surgery
• /
• 제12권3호
• /
• pp.174-182
• /
• 1979

This is a report on four cases of successful surgical correction of coarctation of the aorta [COA] in Department of the Thoracic & Cardiovascular Surgery, Hanyang University Hospital. The first case was a postductal type of coarctation of the aorta associated with Patent ductus arteriosus [PDA], Persistent left superior vena cava [LSVC] and richly developed collateral circulation. Blood pressure was measured to be hypertensive at the arm, but hypotensive at the legs. The coarctation of the aorta was corrected with following procedure: Partial resection of the aortic wall with diaphragmatic structure lust above and below the coarctating line of the aorta, and then the defect of the aortic wall was closed by lateral aortographic suture. PDA was closed by ligation procedure. The second case a preductal type of coarctation of the aorta associated with PDA, LSVC, ventricular septal defect [VSD] and poorly developed collateral circulation. Normal blood pressure was measured at the arm, but hypotension was observed at the legs. Correction of coarctation of the aorta was performed under the establishment of tube bypass because of poor collateral circulation. After resection of coarctating short segment, end to end anastomosis was performed without any tension. PDA was closed by division procedure. Simple suture closure of VSD was performed by open heart surgery two weeks after correction of COA. The third case was a long segment COA without any other anomaly. Blood pressure was measured to be hypertensive at the arm, but hypotensive at the legs. Vascular prosthesis was performed using Teflon graft tube after resecting coarctating long segment [6.5 cm] of the aorta. The fourth case was a long segment COA associated with aortic insufficiency and richly developed collateral circulation. Normal blood pressure was measured at the arm, but hypotension was observed at the legs. Vascular prosthesis was performed using Teflon graft tube after resecting coarctating long segment [6.0 cm] of the aorta. Both blood pressure and peripheral pulse on the arm and the legs returned to normal postoperatively in all patients.

• 대한방사선기술학회지:방사선기술과학
• /
• 제18권2호
• /
• pp.61-73
• /
• 1995

For the managements of the diagnostic X-ray equipments, the authors examined the output of single phase rectification assembly, Three phase rectification assembly and serial radiographic appartus, and got the following conclusions. 1. When the tube voltages in X-ray control panels ware compared to the measured values on the kVp pulse meter, only little differences were detected in all the X-ray equipments. And most of the equipments were all well managed within the internationally permitted limits, excepting the 12.02 % error at 120 kVp in three phase rectifying assembly. 2. As for the X-ray qualities affecting the X-ray images, the serial radiographic apparatus showed excellence, while the single phase rectification assembly were somewhat inferior to the others only maining the internationally recommended limits. 3. The tube voltage ranges where the X-ray output showed excellence were $100{\sim}200\;mA$ in serial radiographic apparatus, $200{\sim}350\;mA$ in three phase rectification assembly and $350{\sim}400\;mA$ in single phase rectification assembly respectively. 4. In the repeatability test of the X-ray equipments, CVs were in the range of $0.0029{\sim}0.049$, which is within the HEW or KS standards. Consequently all the equipments are thought to be well-manage. 5. This study on characteristics and output of the X-ray equipments was accomplished within a limited short time. Long-time researches on the function managements for the X-ray equipments should be followed along with the periodical checking the output for reduction of X-ray exposures to the patients or radio-technologists, and for maintanance and prediction of trouble of the equipments.