• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.1958-1967
• /
• 2000

Rapid Prototyping( RP ) has been increasingly applied in the process of design and development of new products. RP can shrink the time and expense required to bring a new product from initial concept to production. However, the necessity of using RP for short-run manufacturing is continuously driving a development of a cost-effective technique that will produce completely-finished quality parts in a very short time. To meet these demands, the improvements in production speed, accuracy materials, and cost are crucial. Thus, a new hybrid-RP system performing both deposition and machining in a station is proposed in this paper. It incorporates both material deposition in layers and material removal from the outer surface of the layer to produce the required surface finish. The new hybrid-RP system can dramatically reduce the total build time and fabricate largo-sized and freeform objects because it uses very thick layers, i.e.

• Korea journal of population studies
• /
• v.14 no.1
• /
• pp.1-25
• /
• 1991

The Purpose of this study is to analyze the contribution of the total human capital formation to economic growth in Korea. In order to assess the contribution of the total human capital formation to economic growth, aggregate production functions are estimated using two ways of ordinary least squares and polynomial distributed lags based on 1955 - 1988 time series data in Korea. The total amount of investment in human capital is calculated by adding each amount of investment in formal education, vocational training, inter-provincial migration, and health in pecuniary terms. The findings of this study could be summarized as follows ; (1) If we enumerate the variables in good order according to the importance, we get the following ; namely, total number of labor force, inter-provincial migration, vocational training, health, physical capital, and formal education. (2) The contribution of the human capital to economic growth is much more larger than that of physical capital. In particular, it appears that inter-provincial migration and vocational training make a great contribution to economic growth. (3) It appears that investment in formal education has a continuous effect for fifteen years and maximum effect is observed approximately eight years later. In the case of vocational training, the effect of investment lasts for about 12-14 years and its effect on economic growth reaches maximum with the passage of seven to eight years after initial investment. (4) Investment in vocational training contributes more in the long run compared with investment in formal education. The effect of investment in formal education lasts longer than that of vocational training, while the effect of investment in vocational training is considerably larger in the short run compared with the investment in formal education.

• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.533-544
• /
• 2020

In this paper, we conducted a dynamic ex-post assessment on the grape business cessation support System. Based on the analysis results, in the short term, there was an increase in grape price due to a decrease in production and accompanying increases in the prices of consumption substitution items. However, in the long run, grape prices fell again due to an increase in grape production because of the entry of new grape farmers and the growth of adult grape trees. In addition, the analysis showed that the balloon effect caused by the conversion of crops caused indirect damage such as an increase in the production volume of substitution crops and a decrease in prices. When analyzing the social welfare measurement, the results showed that the support system for business cessation increased the overall social welfare due to an increase in producer welfare because of a price increase in the short term, but in the long term, both producer and consumer welfare decreased. In the end, it is necessary to review the system because the government's intervention may cause market distortion and inefficient resource allocation. Above all, it is necessary to minimize the indirect effect of the industry's contraction and balloon effect due to excessive business cessation. For this, conditional support should be provided in parallel with post management rather than unconditional support. In addition, it is necessary to provide a strategic support system that considers substitution items in addition to those items to be supported.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2235-2245
• /
• 2000

The necessity of using rapid prototyping(RP) for short-run manufacturing is continuously driving a development of a cost-effective technique that will produce completely-finished quality parts in a very short time. To meet these demands, the improvements in production speed, accuracy, materials, aid cost are crucial. Thus, a new hybrid-RP system performing both deposition and machining in a station is proposed. For the new hybrid RP process to maintain the same degree of process automation as in currently available processes like SLA or FDNI, a sophisticated process planning system is developed. In the process planner, CAD models(STEP AP203) are partitioned into 3D manufacturable volumes called 'Ueposition feature segment"(DFS) after machining features called "machining feature segmenf'(MFS) are extracted from the initial CAD model. Once MFS and DFS are identified, the process planner arranges them into a chain of processes and automatically generates machining information for each DFS and MFS. The goal of this paper is to present a framework for a process planning system for hybrid RP processes and to outline the geometric algorithms involved in developing such an environment.

• Journal of the Korean Professional Engineers Association
• /
• v.45 no.1
• /
• pp.45-48
• /
• 2012

The 2011 Japan Tsunami caused tremendous damage to coastal areas. Because of their drastic propagation speed and large run-up height, nearshore tsunami can cause catastrophic damages on coastal communities within a short time. It is necessary to establish the tsunami hazard mitigation to reduce human injury housing damage. The construction of Tsunami warning system and production of hazard map are needed for minimizing damage by tsunami.

• International Commerce and Information Review
• /
• v.7 no.2
• /
• pp.75-94
• /
• 2005

This study is focused on evaluating the computer-integrated just-in-time (CI-JIT) production system of a semi-conductor manufacturing firm in Korea. Approaching the mid-1980s, the emphasis was on low price, low-cost operations, and quality, especially in USA. American companies have shifted output to low-wage countries like the Philippines, Korea, Japan, Malaysia and allied countries that can make quality products at low prices. Korea and other Asian countries forego short-term profits to gain a solid foothold in a product market, recognizing that larger market share leads to lower cost and higher profit in the long run. They bring manufacturers and suppliers together to improve material management and operation management, using project teams that investigate topics, such as Just-In-Time(JIT)manufacturing, among others. The "Kanban" word means "card" in Japanese, and is used to indicate the desired final delivery schedule. The operation for a particular item produced is scheduled for a specific time. The same process is extended to the external suppliers. More recently, the cards are gradually being replaced by electronic procedures that follow the same concept. Its capacity must be capable of handling the various transactions required by the JIT coverage as well as some allowances for expanded applications.

• International Area Studies Review
• /
• v.15 no.1
• /
• pp.495-522
• /
• 2011

In this study, a vector error correction model is considered to analyze the correlations among carbon emission, energy use and economic growth using countries adopted carbon tax such as Finland, Netherland, Newzealand, Sweden, and United Kingdom in the short-run dynamics. In order to examine the effect of a carbon tax on the carbon emission specifically for Finland, New zealand and Sweden in the cointegration coefficients among variables, the economic growth equation has the statistically significant negative value(positive values for Netherland and UK). This implies that in the case of the deviation from a long-run equilibrium all variables except carbon emission and energy use are adjusted toward decreasing. After introducing a carbon tax, all variables for Finland, New zealand and Sweden appear to be negative and positive values for the other countries. The evidence that the carbon emission and energy use have been decreased is very weak in the short-run for Finland, New zealand and Sweden but the economic growth is on the decrease after a carbon tax. However, the empirical results show that the increase in carbon emission leads to the decrease in production for Netherland and UK. This implies that for reducing the carbon emission, these countries need to provide more aggressive policies.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.3
• /
• pp.146-153
• /
• 2010

When the production run is short and process parameters change frequently, it is difficult to monitor the process using traditional control charts. In such a case, the coefficient of variation (CV) is very useful for monitoring the process variability. The CV control chart is an effective tool to control the mean and variability of process simultaneously. The CV control chart, however, is not sensitive at small shifts in the magnitude of CV. The CV-EWMA(exponentially weighted moving average) control chart which was developed recently is effective in detecting a small shifts of CV. Since the CV-EWMA control chart scheme can be viewed as a weighted average of all past and current CV values, it is very sensitive to small change of mean and variability of the process. In this paper, we propose an FIR(Fast initial response) CV-EWMA control chart to improve the sensitivity of a CV-EWMA scheme at process start-up or out-of-control process. Moreover, we suggest the values of design parameters and show the results of the performance study of FIR CV-EWMA control chart by the use of average run length(ARL). Also, we compared the performance of FIR CV-EWMA control chart with that of the CV-EWMA control chart and we found that the CV-EWMA control chart gives longer in-control ARL and much shorter out-of-control ARL.

• Environmental and Resource Economics Review
• /
• v.24 no.4
• /
• pp.709-725
• /
• 2015

This study is to analyse the relationship between the price and the supply in the farming Olive Flounder's production area market. The data used in this study correspond to daily price and supply quantity covering time period from January 1, 2007 to June 30. 2013. The analysis methods of cointegration and vector error correction model are employed. The empirical results of this study are summarized as follows: First, the price and the supply follow random walks and they are integrated of order 1. Second, the price and the supply are cointegrated. Third, vector error correction model suggests that the relationship between the price change ration and the supply quantity change ratio has negative and feedback effect exists in the long-run, but the disequilibrium between the price and the supply is corrected by the supply quantity. Finally, vector error correction model suggests that the supply quantity leads the price in the short-run. This indicates that the decrease(increase) of the supply quantity results in the increase(decrease) of the price.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.4
• /
• pp.114-120
• /
• 2008

The control chart is widely used statistical process control(SPC) tool that searches for assignable cause of variation and detects any change of process. Generally, ${\bar{X}}-R$ control chart and ${\bar{X}}-S$ are most frequently used. When the production run is short and process parameter changes frequently, it is difficult to monitor the process using traditional control charts. In such a case, the coefficient of variation (CV) is very useful for monitoring the process variability. The CV control chart is an effective tool to control the mean and variability of process simultaneously. The CV control chart, however, is not sensitive at small shift in the magnitude of CV. In this paper, we propose an CV-EWMA (exponentially weighted moving average) control chart which is effective in detecting a small shift of CV. Since the CV-EWMA control chart scheme can be viewed as a weighted average of all past and current CV values, it is very sensitive to small change of mean and variability of the process. We suggest the values of design parameters and show the results of the performance study of CV-EWMA control chart by the use of average run length (ARL). When we compared the performance of CV-EWMA control chart with that of the CV control chart, we found that the CV-EWMA control chart gives longer in-control ARL and much shorter out-of-control ARL.