• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.431-439
• /
• 2016

Designers are implementing the trial for enhancing human happiness and quality of life. As the happiness factor experienced by each individual is diverse based on human economic growth, absolute design has reached the limitations. A tool to represent the speedy development of change in consumption and problem shooting methods is necessary. Currently, no tool exists that develops in response to changing conditions and subsequent changes. As the solution to this necessity, worm's metamorphosis would be meaningful in design whereby tools exist and necessity as well as solution methods are in advanced change. Rice continues growth following the season, and no single method exists to remove the germs and worms. This study clarified the problems to be resolved by staging the lifetime of rice in 5 stages in environmental changes and conditions. This worm in metamorphosis design is developing brilliantly in biotechnology. However, the environment and conditions that bring happiness to humans do evolve, and this study aims to be the academic research for the design which accordingly replaces the tools.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.10
• /
• pp.581-586
• /
• 2002

To improve the current waveform of diode rectifiers, we propose a new operating principle for the voltage-doubler diode rectifiers. In the conventional voltage-doubler rectifier circuit, relatively large capacitors are used to boost the output voltage, while the proposed circuit uses smaller ones and a small reactor not to boost the output voltage but improve the input current waveform. A circuit design method is shown by experimentation and confirmed simulation. The experimental results of the proposed diode rectifier satisfies the harmonic guide lines. A high input power factor of 97(%) and an efficiency of 98[%] are also obtained. The new rectifier with no controlled switches meet the harmonic guide lines, resulting in a simple, reliable and low-cost at-to dc converters in comparison with the boost-type current-improving circuits. This paper proposes a nonlinear impedance circuit composed by diodes and inductors or capacitors. This circuit needs no control circuits and switches, and the impedance value is changed by the polarity of current or voltage. And this paper presents one of these applications to improve the input current of capacitor input diode rectifiers. The rectifier using the nonlinear impedance circuit is constructed with four diodes and four capacitors in addition to the conventional rectifiers, that is, it has eight diodes and five capacitors, including a DC link capacitor. It makes harmonic components of the input current reduction and the power factor improvement. Half pulse-width modulated (HPWM) inverter was explained compared with conventional pulse width modulated(PWM) inverter. Proposed HPWM inverter eliminated dead-time by lowering switching loss and holding over-shooting.

• Journal of architectural history
• /
• v.23 no.1
• /
• pp.7-19
• /
• 2014

This study considers the proper repair techniques by examining the most representative repair cases of the Korean arch bridges and proposes the constructional manual which can apply similar occasions. The cases are Seonamsa Seungseongyo and Songgwangsa Geukrockgyo where this researcher had taken part in the repair works. This Study proposes the maintenance construction manual about the performance degradation drew by performance degradation of the both Korean arch bridges in the maintenance process. First, arch bridge maintenance should be carried out in the dry season, when water is impermeable in the bottom surface of the bridge. Moreover, risk factors of the maintenance should be excluded to secure the water vally flow, the bypass and the temporary bridge. Second, prior to repair, it has to precede (1)3D shooting (2)formal examination (3)structure safety test (4)geological and lithic surveys (5)arch curvature establishment and makeshift frame settlement before transformation (6)relationship expert comments. Third, if the baduk and the foundation stones are inevitable to replace due to performance degradation on the foundation, it should use the high quality stones and secure greater stress by extending the standard range. The foundation on irregular rock needs to be flattened and underside on the replaced materials require Grengyijil to deliver the equal loads. Fourth, In the process of dismantling the stones of the arched bridge, it could make heavy weathering degree and not reuse the materials. Charge should converge the expert advices to choose the reuseable, the conservate and the alternative materials, and increase the reutilization of the raw materials by preservation and reinforcement treatments. Fifth, the side wall should be repaired by the rubble work technique which is not able to pile compost satiety, so it must use long depth of masonary stones for reinforcement. It is considered to reinforce the stone wall in shore as much as possible and protect the abutment and the side wall on the upstream for the arch bridge maintenance works.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.15-15
• /
• 2019

The walnut (Juglans regia L.), a member of the Juglandaceae, is native to the mountain ranges of central Asia. This species of walnut is valued commercially for its nuts and in some areas for its timber. The seeds of walnut are recalcitrant and it has strong integument dormancy and their germination is irregular, making its natural propagation difficult. Low percentage of seed germination and long propagation cycle are the main problems of propagation. This study was conducted medium composition on in vitro plantlet regeneration from axillary buds of walnut. It has proved to be the most generally applicable and reliable method of in vitro propagation. Micropropagation culture that axillary buds are excised aseptically enables faster multiplication of plants. The axillary buds of walnut new cultivar "Sinlyeong" were cultured on two basal media which contained the different plant growth regulators depending on the respective shooting and rooting stage. After 12 weeks, the shoot generation rate was 85.3%, the shoot number and its length were 1.9/explant and 2.7 cm in the most favorable medium composition. The percentage of rooting was 25.4%. From these results, it was found the optimum basal medium and plant growth regulator for in vitro plant regeneration from axillary buds of walnut new cultivar "Sinlyeong". However, we have continued to search the other medium additives to enhance the rate of walnut root.

• Journal of the Korean Society of School Health
• /
• v.27 no.1
• /
• pp.1-6
• /
• 2014

Purpose: The purpose of this study was to investigate the effect of oral health education on adolescents. Methods: The subjects were middle school students in a health promoting school in Gunpo, Gyeonggi Province. Before giving the students oral health instruction, their modified Patient Hygiene Performance index (PHP index) was measured using disclosing solution. Then, the students were taught the right way to brush teeth (Rolling method) and use oral hygiene devices such as dental floss, tongue cleaner and interdental brush. Their modified PHP index was re-measured three days after and seven days after the education to evaluate the effect and persistency of oral health education. of the total 116 students, 48 students who completely filled out the questionnaire and participated in the whole process, photo shooting and three times of PHP index measurement, were included in the final analysis. Results: The students' modified PHP index significantly decreased three days after the education. However, the index slightly went back up seven days after the oral health education. Conclusion: Oral health education was effective in reducing dental plaque which remained after brushing. Continuous education about and constant motivation for oral hygiene turned out to be critical to maintain the impact of oral health education. Therefore, it is necessary to develop educational contents which can constantly motivate teenagers.

• (The)Study of the Eastern Classic
• /
• no.43
• /
• pp.33-64
• /
• 2011

The historical drama played on TV in 2003, Daejanggeum is originally based on the short historical record of lady doctor of the palace from the [Jungjong record] of Josun. The drama mixed fiction and historic record well together draw enormous interest and became a novel, musical and animation for children. Also the location of shooting drama became a theme park to attract travelers and the name 'Daejanggeum' was used for products to create great additional value. Most of all, the drama then was exported to overseas and became the representing drama of Korea. Therefore, drama is the representing piece that proved the success of historic data with its application as various modern cultural contents. The analysis of success reason of showed the creation of new modern woman character, fresh selection of the item that suits well in the time of desiring wellbeing, the strong drama scenario with different story development compared to previous historic drama. Also, it used 'one source multi use' method prior to the broadcasting and prepared production of various cultural contents. This success of Daejanggeum means a lot from the point of 'modern acceptance of tradition' to tradition researchers.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.775-784
• /
• 2023

Drone images are being used more and more actively in the fields of surveying and spatial information, and are rapidly replacing existing aerial and satellite images. The technology of quickly acquiring real-time data at low cost and processing it is now being applied to actual industries beyond research. However, there are also problems encountered as this progresses. When high-resolution spatial information is acquired using a general 2D flight plan for a terrain with sever undulations, problems arise due to the difference in resolution of the data. In particular, when a low-altitude high-resolution image is taken using a drone in a mountainous or steep terrain, there may be a problem in image matching due to a resolution difference caused by terrain undulations. This problem occurs because a drone acquires data while flying on a 2D plane at a fixed altitude, just like conventional aerial photography. In order to acquire high-quality 3D data using a drone, the scale difference for the shooting distance should be considered. In addition, in order to obtain facade images of large structures, it is necessary to take images in 3D space. In this study, in order to improve the disadvantages of the 2D flight method, a 3D flight plan was established for the study area, and it was confirmed that high-quality 3D spatial information could be obtained in this way.

• Journal of radiological science and technology
• /
• v.31 no.4
• /
• pp.337-346
• /
• 2008

A questionaire survey was conducted for patients who had been examined at the Department of Radiology to investigate the items that need to be improved. Brainstorming was also conducted by team members to suggest the tactics that can efficiently perform the QI activity by selecting the most frequently answered topics for the reduction of waiting time of x-ray examination. From September 2006 to November 2007, number of patients before and after conducting QI was compared for 3 months by each category differentiated by types of detailed causes. A patient case was set as one shooting for one patient. After conducting QI, the waiting cases before conducting QI were evaluated for the method of improvement for 3 month through the QI team discussion and conducted by following the improvement method for the next 1 month and the waiting cases were measured and the difference before and after the QI activity was compared in percentage. 1. When patient waiting cases were compared before and after conducting QI activity against the causes of repetition, it resulted in 3.9% of reduction effect. 2. When patient waiting cases were compared before and after conducting QI activity against the causes for the lack of guiding, it resulted in 1.1% of reduction effect. 3. When patient waiting cases were compared before and after conducting QI activity against the causes of miss-inputting prescription, it resulted in 1.1% of reduction effect. 4. When patient waiting cases were compared before and after conducting QI activity against the causes for emergency patients, patients with acute pain and discomfort patients, it resulted in 12.0% of reduction effect. 5. When patient waiting cases were compared before and after conducting QI activity against the causes for shooting overlapping of outpatients and hospitalized patients, it resulted in 4.7% of reduction effect. There are many factors to reduce the patient waiting cases in radiography. The first step is for radiology department to find these factors through QI, to improve them, which is the reason why the QI team is organized to perform the QI activities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.537-542
• /
• 2021

This paper improves the possibility of recognizing fast-moving objects through the YOLO (You Only Look Once) deep learning recognition model in an application environment for object recognition in images. The purpose was to study the method of collecting semantic data through processing. In the recognition model, the moving object recognition error was identified as unrecognized because of the difference between the frame rate of the camera and the moving speed of the object and a misrecognition due to the existence of a similar object in an environment adjacent to the object. To minimize the recognition errors by compensating for errors, such as unrecognized and misrecognized objects through the proposed data collection method, and applying vision processing technology for the causes of errors that may occur in images acquired for sports (tennis games) that can represent real similar environments. The effectiveness of effective secondary data collection was improved by research on methods and processing structures. Therefore, by applying the data collection method proposed in this study, ordinary people can collect and manage data to improve their health and athletic performance in the sports and health industry through the simple shooting of a smart-phone camera.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.2
• /
• pp.45-53
• /
• 2009

A quick and simple detection method of explosive compounds in environmental matrix (soil and water) can provide a screening step which reduces the number of unnecessary samples and the cost of expensive laboratory analysis at a site investigation. A commercially available EXPRAY$^{(R)}$Explosives Field Detection Kit (EXPRAY) was used to determine the minimum detection concentration and to test the possibility of semi-quantitative analysis of 14 explosive compounds using standard solutions. The results showed that EXPRAY could detect 5 explosive compounds, TNT, RDX, HMX, Tetryl, and TNB, out of 14 US EPA designated explosives. The minimum detection limit of the nitramine explosives was 14 ng/$^2$ for HMX and RDX. EXPRAY was more sensitive to nitroaromatics than the nitramines and the minimum detection limits per unit area (mm$^2$) for Tetryl, TNB, and TNT, were 3 ng, 3 ng, and 0.3 ng, respectively. The semi-quantification of 5 explosive compounds in an order ofmagnitude could be achieved by the intensity of developed color only when EXPRAY was applied on the standard solutions under controlled laboratory conditions. With contaminated soil samples, however, only the presence and type of explosive compounds was identified. Therefore, EXPRAY is an economic and sensitive method that can be used in a screening step for the identification of explosives in the field samples.