• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.89-95
• /
• 2001

Ceramic tool has to equip with not only high toughness and strength but also low thermal expansion and good thermal conductivity which leads to the high thermal shock resistance. These characteristics make it have longer tool life under thermal stress condition. In this study, commercial Si$_3$N$_4$ceramic cutting tool and home-made SiC based ceramic cutting tools which have different sintering time and chemical composition are tested under various cutting speed and the feed rate increase, the cutting force and the flank wear growth ratio increase, too. The performance of home-made SiC based ceramic cutting tool shows the possibility to be a new ceramic tool.

• Journal of the Korean Ceramic Society
• /
• v.27 no.3
• /
• pp.329-336
• /
• 1990

In this investigation, bar-shaped specimens which consisted of three layers are prepared to study the effects of residual compressive stress on the mechanical properties in ZTA. The outer layers contained Al2O3 and unstabilized ZrO2 and the central layer contained Al2O3 and stabilized ZrO2(with 5.10wt% Y2O3). When cooled from the sintering temperature, some of zirconia in the outer layers transformed to the monoclinic form while zirconia in the central layer was retained in the tetragonal form. The transformation which induces to dilatational expansion led to the estabilishmenet of compressive stress in the outer layers and balances tensile stress in the central layer. Decrease of outer layer thickness(for a fixed total thickness)increases residual compressive stress. Because of residual compressive stress in the outer layers, the fracture toughness of outer layers of 3-layers composite is 10.21 Mpam1/2, which is increased to 25% above in comparison with 1-layer specimens in ZTA. Also, the 3-layers composite is believed to exhibite greater fracture resistance in contact damage environment from thermal shock test.

• BMB Reports
• /
• v.51 no.6
• /
• pp.290-295
• /
• 2018

Y-box binding protein 1 (YB-1) is a member of the cold-shock domain (CSD) protein superfamily. It participates in a wide variety of cellular events, including transcription, RNA splicing, translation, DNA repair, drug resistance, and stress responses. We investigated putative functions of YB-1 in HIV-1 replication. Functional studies using overexpression or knockdown of YB-1 in conjunction with transfection of proviral DNA showed that YB-1 enhances virus production. We found YB-1 regulates HIV-1 production by stimulating viral transcription using HIV-1 LTR sequence U3RU5 with Luciferase assay. We also identified a specific region from amino acids 1 to 324 of YB-1 as necessary for the participation of the protein in the production of virions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.3
• /
• pp.425-429
• /
• 2003

Staphylococcus aureus is a major pathogen for cattle, causing various forms of subclinical and clinical mastitis and could be a causative agent of food poisoning, it produces various superantigenic exotoxins which have a great public health significance. A total of 72 S. aureus clinical isolates from dairy farms located in Kyunggi Province Korea were examined for the species identification by biochemical method, and for the detection of $\beta$-lactamase, enterotoxin and other exotoxins genes by PCR. The results of species identification by biochemical method agreed with those of PCR done with species specific primer STA-AU. $\beta$-lactamase is an enzyme closely associated with the resistance to antibiotic penicillin, which is an important means of treatment of mastitis, all the isolates were positive for the presence of genes encoding $\beta$-lactamase, which were reproduced in penicillin susceptibility disc assay. Six types of toxin genes, Staphylococcal enterotoxin (SE)A, SEB, SEC, SEE, toxic shock syndrome toxin (TSST-1) and exfoliative toxin A (ET A) were detected in 72 isolates by PCR associated genotypic method in this study, none of the isolates carried the genes for enterotoxin D (SED) and exfoliative toxin B (ETB). The occurrence rate of exotoxin genes rated as 12.5%, and the precision of the PCR identification results has been confirmed using the reference strains.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.3
• /
• pp.161-171
• /
• 2010

As embedded systems adopt monolithic kernels, NAND flash memory is used for swap space of virtual memory systems. While flash memory has the advantages of low-power consumption, shock-resistance and non-volatility, it requires garbage collections due to its erase-before-write characteristic. The efficiency of garbage collection scheme largely affects the performance of flash memory. This paper proposes a novel garbage collection technique which exploits data redundancy between the main memory and flash memory in flash memory-based virtual memory systems. The proposed scheme takes the locality of data into consideration to minimize the garbage collection overhead. Experimental results demonstrate that the proposed garbage collection scheme improves performance by 37% on average compared to previous schemes.

• Tribology and Lubricants
• /
• v.29 no.3
• /
• pp.180-185
• /
• 2013

The purpose of this study was to analyze the tribological characteristics of the Electronic control suspension System in a car. In the first example, the cilp used to attach the front electronic control suspension(ECS) system's control actuator was fastened very tightly. Thus, the wire was cut because of continual rotation of the shock-up shover piston rod used to adjust the height of the car. This verified the disconnection phenomenon where wire damaged makes it impossible for the ECS system to send signal to the actuator. The second example, involved a minute hole that allowed gas to leak from the ECS system. As a result, the height of the car verified the down phenomenon. In the third example, the resistance of a wire measured at $0.21{\Omega}$, when the G sensor was disconnected from the system. This verified the system shutdown and lighting of the ECS warning lamp because of body interference caused by a slight pressure on the battery cover. Therefore, quality control is always necessary to ensure safety and durability of a car.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2000.04a
• /
• pp.116-123
• /
• 2000

The purpose of this work was to investigate the induction of stress shock proteins (SSPs) in Burkholderia sp. YK-2 in response to 2,4-dichlorophenoxyacetic acid (2,4-D), and Pseudomonas sp. DJ-12 to benzoate, 4-chlorobenzoate (4-CBA), 4-hydroxybenzoate, and biphenyl. The SSPs, which contribute to the resistance of the cytotoxic effect of the toxic aromatic compounds including 2,4-D and 4-CBA, were induced at different concentrations of the compounds in exponentially growing cultures of Burkholderia sp. YK-2 or Pseudomonas sp. DJ-12. This response involved the induction of a 43 kDa DnaK and 41 kDa GroEL proteins in Burkholderia sp. YK-2, characterized by SDS-PAGE and Western blot using the anti-DnaK and anti-GroEL monoclonal antibodies. In Pseudomonas sp. DJ-12, 70 kDa DnaK and 60 kDa GroEL proteins was induced as SSPs, respectively. The total SSPs were analyzed by 2-D PAGE. Survival of Burkholderia sp. YK-2 or Pseudomonas sp. DJ-12 with time in the presence of different concentrations of the compounds was monitored, and viable counts paralleled the induction of the SSPs in these strains. Cells treated with the increased concentrations of toxic compounds showed some destructive openings on the cell envelopes.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.204-209
• /
• 2005

Load/Unload(L/UL) technology includes the benefits, that is, increased areal density, reduced power consumption and improved shock resistance contrary to contact-start-stop(CSS). It has been widely used in portable hard disk drive and will become the key technology far developing the small form factor hard disk drive. The main object of L/UL is no slider-disk contact or no media damage. For realizing those, we must consider many design parameters in L/UL system. In this paper, we focus on lift-off force. The 'lift-off' force, defined as the minimum air bearing force, is another very important indicator of unloading performance. A large amplitude of lift-off force increases the ramp force, the unloading time, the slider oscillation and contact-possibility. To minimize 'lift-off' force we optimizes the slider and suspension using the integrated optimization frame, which automatically integrates the analysis with the optimization and effectively implements the repetitive works between them. In particular, this study is carried out the optimal design considering the process of modes tracking through the entire optimization processes. As a result, we yield the equation which can easily find a lift-off force and structural optimization for suspension.

• Transactions of the Society of Information Storage Systems
• /
• v.5 no.2
• /
• pp.70-75
• /
• 2009

Most hard disk drives uses load/unload technology because of benefits as like an increased areal density, a reduced power consumption and an improved shock resistance. However, ramp tilt induced by ramp manufacture and assembly causes mechanical problems such as unload fail in case of exceeding ramp tolerance. In this paper, we focus on experimental analysis for unloading characteristics affected by ramp tilt. We repeatedly perform load/unload test as 500,000 cycles for original model and ramp tilt model. This paper shows that it is possible to analyze unload characteristics through measuring scratch and wear of suspension lift-tab, ramp, suspension dimple-flexure and disk. We also identify structural relation between suspension lift-tab and ramp through scratch and wear of suspension lift-tab and ramp. As the result of measurement and analysis, we can investigate decrease of unloading performance in ramp tilt model.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.275-281
• /
• 2011

Solar reforming of methane with $CO_2$ was successfully tested with a direct irradiated absorber on a parabolic dish capable of $5kW_{th}$ solar power. The new type of catalytically activated metallic foam absorber was prepared, and its activity was tested. Ni was applied as the active metal on the gamma - alumina coated Ni metal foam for the preparation of the catalytically-activated metal foam layer. Compared to conventional direct irradiation of the catalytically-activated ceramic foam absorber, this new metallic foam absorber is found to exhibit a superior reaction performance at the relatively low insolation or at low temperatures. In addition, unlike direct irradiation of the catalytically-activated ceramic foam absorber, metallic foam absorber has better thermal resistance, which prevents the emergence of cracks caused by mechanical or thermal shock. The total solar power absorbed reached up to 2.1kW and the maximum $CH_4$ conversion was almost 40%.