• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1170-1175
• /
• 2003

Recently, the disturbance caused by an optical disk vibration and the external vibration/shock are more serious problem in an optical disk drives (ODD) as an ODD become small size and rotation speed increases. The conventional controller cannot cope with the mentioned problems properly when the disturbance and vibration are larger than some range. Therefore, we propose a new control scheme using a disturbance observer (DOB) and it can control the aforementioned problems. The designed the controller is applied to a commercial ODD in focusing direction, then its validity is proved by experimental method. By rising the disturbance observer theory, the focusing performance is conspicuously improved in the presence of sinusoidal vibrations or a shock disturbance. This algorithm also applies to a tracking structure also, because focusing structure is very similar to it.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.200-203
• /
• 2011

Supersonic ejectors are simple mechanical components, which generally perform mixing and recompression of two fluid streams. Ejectors have found many applications in engineering. In aerospace engineering, they are used for high altitude testing (HAT) of a propulsion system by reducing the pressure of a test chamber. It is composed of three major sections: a vacuum test chamber, a propulsive nozzle, and a supersonic exhaust diffuser (SED). This paper aims at the improvement in HAT facility by focusing attention on the vertical firing rocket test stand with shock generators. Shock generators are mounted inside the SED for improving the pressure recovery. The results clearly showed that the performance of the ejector-diffuser system was improved with the addition of shock generators. The improvement comes in the form of reduction of the starting pressure ratio and the vertical height of test stand. It is also shown that shock generators are useful in reducing the total pressure loss in the SED.

• 한국치위생학회지
• /
• 제23권4호
• /
• pp.251-260
• /
• 2023

Objectives: This study aimed to provide basic data for the development of clinical practice-related education program by analyzing the effects of grit, job satisfaction, and retention intention on transition shock of new dental hygienists. Methods: From April 19 to July 4, 2022, the data was collected from 200 new dental hygienists working for dental hospitals/clinics. Using the SPSS Statistics ver. 22.0, this study was conducted the t-test, one-way ANOVA, Pearson's correlation analysis, and multiple regression analysis. Results: There were positive correlations between grit, job satisfaction, and retention intention, a negative correlation between grit and transition shock, a positive correlation between job satisfaction and retention intention, a negative correlation between job satisfaction and transition shock. and a negative correlation between retention intention and transition shock. As the factors affecting transition shock, lower pay and main performance of medical cooperation work increased transition shock. When job satisfaction and retention intention were higher, transition shock decreased. Conclusions: In order to reduce transition shock of new dental hygienists, it would be necessary to operate clinical practice-related training program, and also to establish a training environment similar to the clinical site/context/situation similar to clinical context/situation.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.105-110
• /
• 2010

Supersonic ejectors are simple mechanical components, which generally perform mixing and recompression of two fluid streams. Ejectors have found many applications in engineering. In aerospace engineering, they are used for high altitude testing (HAT) of a propulsion system by reducing the pressure of a test chamber. It is composed of three major sections: a vacuum test chamber, a propulsive nozzle, and a supersonic exhaust diffuser (SED). This paper aims at the improvement in HAT facility by focusing attention on the vertical firing rocket test stand with shock generators. Shock generators are mounted inside the SED for improving the pressure recovery. The results clearly showed that the performance of the ejector-diffuser system was improved with the addition of shock generators. The improvement comes in the form of reduction of the starting pressure ratio and the vertical height of test stand. It is also shown that shock generators are useful in reducing the total pressure loss in the SED.

• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.135-141
• /
• 2004

Anti-shock performance is one of the most important design specifications of TFT-LCD modules. Since they are adopted fur major display units of many mobile applications such as lap-top PCs, cellular phones, and palm pilots, they are able to accommodate and endure high level transient mechanical energy inputs. For the reasons, not only the LCD unit manufacturers but their customers like PC makers perform a series of strict impact/drop test on the units. Currently, designers are mostly relying on their own trial-error based experience for the anti-shock design. Thus those designs depending on only experience may result in disqualification from the drop/impact test during final product evaluation. Those shock failures of any new designs are prohibitive for both LCD and PC manufacturers. In order to avoid this problem, many designers are focusing on the development of computer-aided design tools that is directly connected to shock simulation capabilities and then shock-proof design cycle time could be significantly reduced. Development of an integrated CAE system for the shock-proof design is presented in this article. At every stages of the development of present work, practical industrial applicability and mass production feasibility are seriously considered and tested so that the system is to be used in the LCD design engineering field.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.213-216
• /
• 2005

Active control method is applied to a flexible beam excited by a shock impulse by focusing on reducing the residual vibrations after the shock input. It is assumed that the shock input can be measured and is always occurred on the same point of the beam. If the system is well identified and the corresponding inverse system is designed reliably, it has shown that a very simple feed-forward active control method may be applied to suppress the residual vibrations without using an error sensor and adaptive algorithm. Both numerical simulation and experimental result show a promising possibility of applying to a practical problem.

• 천문학회보
• /
• 제44권2호
• /
• pp.55.2-55.2
• /
• 2019

The firehose instability is driven by a pressure anisotropy in a magnetized plasma when the temperature along the magnetic field is higher than the perpendicular temperature. Such condition occurs commonly in astrophysical and space environments, for instance, when there are beams aligned with the background magnetic field. Recently, it was argued that, in weak quasi-perpendicular shocks in the high-β intracluster medium (ICM), shock-reflected electrons propagating upstream cause the temperature anisotropy. This electron temperature anisotropy can trigger the electron firehose instability (EFI), which excites oblique waves in the shock foot. Scattering of electrons by these waves enables multiple cycles of shock drift acceleration (SDA) in the preshock region, leading to the electron injection to diffusive shock acceleration (DSA). In the study, the kinetic properties of the EFI are examined by the linear stability analysis based on the kinetic Vlasov-Maxwell theory and then further investigated by 2D Particle-in-Cell (PIC) simulations, especially focusing on those in high-β (β~100) plasmas. We then discuss the basic properties of the firehose instability, and the implication of our work on electron acceleration in ICM shock.

• 한국레이저가공학회지
• /
• 제17권4호
• /
• pp.1-6
• /
• 2014

Femtosecond laser induced shock generation in water and vitreous humor of enucleated porcine eyeball was investigated. When focusing the femtosecond laser into the liquid mediums, the acoustic waves with a frequency of about 15.6kHz could be observed by using wide-band microphone. The amplitude of the acoustic signals from water has attained a maximum under a laser power of about 5mW. Further increment of the power results in a decrement of the acoustic signals due to nonlinear optical process including filamentation of laser beam. We have further investigated the effect of femtosecond laser induced acoustic waves by applying the laser pulse into enucleated porcine eyeball. The comparative studies on both healthy and diseased eyeballs led us propose that the femtosecond laser pulses could be utilized as a novel tools for treatment of partially detached retina layers from their choroid structures.

• 임상간호연구
• /
• 제26권3호
• /
• pp.344-351
• /
• 2020

Purpose: The purpose of this study was to identify related factors in the organizational socialization of new nurses, focusing on the reality shock of new nurses and social support by education specialist nurses. Methods: Participants were 122 new nurses with clinical experience of 1 year or less as nurses working in a general hospital that is carrying out a pilot project for a new nurse training system. Data were collected using self-report questionnaires which included identification of participants' characteristics, social support of education specialist nurse, reality shock and organizational socialization. Results: The organizational socialization score was 3.07±0.45 points. The results of the stepwise multiple regression showed that factors affecting organizational socialization of new nurses were social support by gender, education specialist nurse and reality shock. These three variables accounted for 72.0% of organizational socialization. Conclusion: These findings suggest that the social support of education specialist nurses be enhanced to increase the organizational socialization of new nurses. There is also a need for a program to decreased the reality shock of new nurses.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.327-330
• /
• 2006

공동부 위에 설치된 슬롯판을 이용한 경사충격파와 난류 경계층의 간섭유동의 피동제어에 관한 수치적 연구가 수행되었다. 얻어진 수치결과는 피토압력/벽압력 분포와 쉴리렌 유동가시화 등 동일한 경계조건에서 수행된 실험결과와 비교되었으며, 두 결과가 서로 잘 일치하고 있음이 확인되었다. 또한 슬롯의 위치와 개수, 슬롯의 각도 등 슬롯판의 다양한 형상변화가 간섭유동에 미치는 영향이 추가로 관찰되었다. 이러한 슬롯의 형상변화가 간섭유동에 미치는 영향을 정량적으로 파악하기 위하여, 간섭유동 후방의 피토압력 및 전압 변화, 경계층 특성변화, 그리고 슬롯판을 통하여 공동부 내부로 유출입하는 질량유량의 변화 등이 관찰되었다.