• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.747-752
• /
• 2020

Special logistics, such as steel coils or steel plates, are being shipped and deployed depending on experienced personnel. Therefore, there is a great possibility of accidents due to immaturity by human error or lack of experience. There is a need to prevent the possibility of such an accident in advance, to apply security requirements required for special logistics, to ensure the stability of cargo, and to operate an management system to check the correct loading list. In addition, accurate shipping inspection is necessary to balance the ship. This paper analyzes the problems of shipping inspection currently being implemented and proposes a web-based port special logistics shipping inspection and balancing operation system to improve it.

• Journal of Arbitration Studies
• /
• v.8 no.1
• /
• pp.293-322
• /
• 1998

General Administrative Procedures of the Preshipment Inspection 1. Initial notification Preshipment Inspection is initiated by Agency when it receives notice either from the importing country, or the seller, that an export needs to be imspected 1.1 Notice from the importing country 1.2 Notice from the seller 2. Preliminary price verification After receipt of initial notification, Agency undertakes, Where possible, a preliminary price verification, based upon the Inspection Order and other contractual documents received. 3. Customs classification When required by the Government of the importing country. Agency forms an opinion of the Customs Classification Code based upon the Customs Tariff Book and Rules of Classification of the country of importation. The Customs Classification Code determines the tariff rate on the basis of which the importer will be required to pay import duties. 4. Import eligibility 5. Arrangements for physical inspection 5.1 Inspection request from seller 5.2 Place of inspection 5.3 Date of inspection 5.4 Physical inspection procedures 6. Physical inspection results When the physical inspection is completed, the inspector submits his report to the Agency office and the result of inspection will be communicated to the seller and, where applicable, the place of inspection. The result will state: satisfactory or conditional of unsatisfactory. The seller is welcome to present his views in writting to Agency in the event there is any query regarding the issuance of a conditional of unsatisfactory inspection result. 6.1 Satisfactory 6.2 Conditional 6.3 Unsatisfactory 7. Shipment of the goods The seller is advised to check with Agency prior to shipment if the physical inspection result has not been received or there are any doubts concerning whether a Clean Report of Findings will be issued. 8. Final price verification and classification Based on the results of physical inspection and appropriate final documents, Agency finalises the price verification and the Agency opinion of Customs classification code. When the preliminary price verification has not resulted in any unresolved questions and the inspection result and other documents received are consistent with the preliminary documentation, Agency will not normally require any additional information. The main exception would be if the terms of sale require reference to prices at the date of shipment. 9. The Report of Findings 9.1 Types of Reports of Findings - Clean Reports of Findings(CRF) The Agency will issue a Clean Reports of Findings(CRF), or equivalent document, normally within two working days after receipt of the necessary correct final documents and a satisfactory result in all aspects of the inspection. - Discrepancy Report.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.45
• /
• pp.111-136
• /
• 2010

Bill of lading means the transport document ("marine", "ocean" or "port-to-port" or similar), however named, covering sea shipment only. Data in a bill of lading, when read in context with the credit, the document itself and international standard banking practice, need not be identical to, but must not conflict with, data in that document, any other stipulated document or the credit, according to UCP 600 and ISBP. This article has provided the general guideline of the discrepancies on the basis of UCP 600, ISBP 681 and the ICC Banking Commission Opinions, for the solution of the unpaid problems of the credit transactions. I have studied especially the ICC Banking Commission Opinions and the DOCDEX Decisions on the bill of lading after UCP 600, the international standard banking practice (ISBP 681), and the recent Korean cases. As such, this article would fill a need gap in the market between the general principles in the UCP provisions and the daily job of the practitioner. The credit practitioners are suggested to this resulting guidance whenever doubts arise as to how to check the credit documents in daily practice.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.778-783
• /
• 2006

Price prediction is essential to decisions of investment and shipment in oak mushroom cultivation. But predicting the prices of oak mushroom is very difficult because there are so many uncertain factors affecting the demand and the supply in the market. The Box-Jenkins methodology is one of strong tools in price prediction especially for the short-term using historical observations of time series. In this paper, the Box-Jenkins methodology is applied to find a model to forecast future oak mushroom prices. And out-of-sample test was conducted to check out the prediction accuracy. The result shows the high accuracy except for market disturbance period affected by unexpected weather change and reveals the usefulness of the model.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.15-20
• /
• 2017

This study presented the strength of the materials and parts for smart distribution board fabrication, and developed a work operation process chart for smart distribution board fabrication. This work operation process chart for smart distribution board fabrication complied with SPS-KEMC regulations, and the applicable range and object are less than 1,000 V and 1,000 Hz for the AC distribution board and less than 1,500 V for the DC distribution board. The power supply is 3 phase 4 wires ($3{\Phi}$ 4W), divided into a single phase circuit and a 3 phase circuit. In addition, the circuit was configured so that the leakage current flowing through the distribution line of the load could be monitored in real time by using the sensor module installed at the rear end of the circuit breaker. Therefore, the administrator can easily find the risk factor of the load since engineer can check the leakage current of each distribution line. In addition, if a leakage current greater than standard value flows, it is possible to generate an alarm against a short circuit and cut off the leakage current. The work operation process chart for the smart distribution board fabrication consists of the following steps: raw and subsidiary materials, sheet metal work, tube making, welding, painting, busbar fabrication, assembly and wiring, product inspection, shipment, etc. Moreover, symbols, ${\Delta}$, ${\nabla}$, ${\bigcirc}$, ${\Rightarrow}$, etc. were used according to the type of work and work progress so that workers can easily understand the progress of the work.

• Journal of Convergence for Information Technology
• /
• v.9 no.3
• /
• pp.8-15
• /
• 2019

Recently, the importance of pre-shipment quality inspection has been emphasized due to the increase of STB supply. In this paper, we propose a method to support automation of quality inspection through simultaneous multi-channel input of STB video signal. The proposed method extracts a fingerprint using the center scan line of the image after stable video shot boundary detection using CeLDP combining color information and LDP code and performs synchronization between input video channels. The proposed method shows stronger shot boundary detection performance than the conventional shot detection method. Through the experiments applied to the real environment, it is possible to secure reliability and real-time quality check for synchronization between multi-channel inputs required for STB quality inspection. Also, based on the proposed method, we intend to study a large-scale quality inspection method in the future and propose a more effective quality inspection system.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.610-616
• /
• 2023

In this paper, we implement an unmanned delivery robot system with Robot Operating System(ROS)-based mobile manipulator, and introduce the technologies employed for the system implementation. The robot consists of a mobile robot capable of autonomous navigation inside the building using an elevator and a Selective Compliance Assembly Robot Arm(SCARA)-Type manipulator equipped with a vacuum pump. The robot can determines the position and orientation for picking up a package through image segmentation and corner detection using the camera on the manipulator. The proposed system has a user interface implemented to check the delivery status and determine the real-time location of the robot through a web server linked to the application and ROS, and recognizes the shipment and address at the delivery station through You Only Look Once(YOLO) and Optical Character Recognition(OCR). The effectiveness of the system is validated through delivery experiments conducted within a 4-story building.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.2093-2099
• /
• 2015

To prevent damage to the cargo, monitoring and remote management for reefer containers is necessary. The currently used remote monitoring service is the Power Cable Transmission(PCT) system, which is recommended by the International Maritime Organization(IMO). However, this system is not widely used because it requires a separate PCT infrastructure and is susceptible to data loss problems. To solve this problem, this study introduces the "IoT-based reefer container management system", The proposed system which is attached to reefer container collects and transmits data on the temperature, status and location of reefer container to middleware using RS-232 communication and WCDMA/GSM communication. Middleware is store the data received in the database and provide information to user in real time through the web and mobile program. At this time, users able to change setting temperature in real time from a distant place through the web program. This study tested by transit about shipment of strawberries to monitor and analyze and check the system's overall effectiveness.