• 정보처리학회논문지B
• /
• 제10B권4호
• /
• pp.403-410
• /
• 2003

자율운항제어 시스템은 선박운항에 있어 항해계획을 수립하고 현재의 선박운항 상태를 파악하여 선박을 제어하는 항해 전문가 시스템이다. 이러한 자율운항제어 시스템을 테스트하기 위해서는 실제 선박을 대상으로 성능을 테스트하여야하나, 선박은 고가의 운송수단이고, 자율운항제어 시스템을 장착하기 위한 하부장치 인터페이스를 설계 및 구현하기에는 많은 시간이 소요되므로 선박시뮬레이션 시스템을 이용하는 것이 타당하다. 선박시뮬레이션 시스템은 선박의 물리적 운항특성을 모방하는 선박운동시뮬레이션 시스템과 선박 운항 주변에 변화하는 장애물을 시뮬레이션하는 주변객체 시뮬레이션 시스템으로 구성된다. 본 연구에서는 선박 운동방정식을 이용하여 선박의 물리적 및 운항 특성을 모방한 선박운동시뮬레이션 시스템을 설계 개발하였다.

• 한국시뮬레이션학회논문지
• /
• 제10권2호
• /
• pp.33-46
• /
• 2001

Recently, the usage of containers in marine transportation is rapidly increasing. The problem of ship stability is important because of its direct influence to the loss of the human-life, ship, and merchandise. However, the assessment for ship stability during container loading/unloading in port is dependent on human experience only. On the other hand, the emerging information and communication technologies of shipbuilding industrial environments are rapidly changing. To respond to the situation, a new paradigm has been matured with new concepts such as the concrete method. Especially, all the efforts are shown to be concentrated to realize the concept of Simulation Based Design(SBD) based on three dimensional Computer Aided Design(CAD) model. In this paper, ship model-based simulation methodology for design and operation of ship is suggested, and for the verification of suggested methodology, the system for stability assessment of ship during container loading/unloading was developed using ENVISION, a general-purpose simulation system. The developed system consists of geometric modeling subsystem, basic calculation subsystem, and Computer Aided Engineering(CAE) subsystem. In addition, interface to CAE/CAD /simulation system such as SIKOB and ENVISION is provided.

• 대한조선학회논문집
• /
• 제44권2호
• /
• pp.166-173
• /
• 2007

Collision analysis problems between ship to ship can be generally classified into the external mechanics(outer dynamics) and internal mechanics(inner dynamics). The former can be also dealt with the concept of fluid-structure interaction and the use of rigid body dynamic program, depending on the ways handling the hydrodynamic pressure due to surrounding water. In this study, full scale ship collision simulation was carried out, such as a DWT 75,000 ton striking ship collided at right angle to the middle of a DWT 150,000 struck ship with 10 knots velocity, coupling MCOL, a rigid body mechanics program for modeling the dynamics of ships, to hydrocode LS-DYNA. It could be confirmed that more suitable damage estimation would be performed in the case of the collision simulations with consideration of surrounding water through the comparison with the collision simulation results of fixed struck ships without it. Through this study, the opportunity could be obtained to establish a more effective ship collision simulation technique between ship to ship.

• 한국군사과학기술학회지
• /
• 제10권1호
• /
• pp.78-85
• /
• 2007

A gun is still one of the major weapons of a combat ship. To assess the ship's fire control capability which is influenced by tracking system, fire control algorithm, gun, the ship itself, target behavior, environment and engagement situation, simulation system for gun-oriented engagement for surface ship is needed. This paper proposes the process for designing and implementing a gun-oriented engagement simulation system using DEVS(Discrete Event Simulation Specification), which is a formalism based on the set theory. It consists of the following activities : 1) analyzing the characteristics of a gun-oriented engagement, 2) constructing the deterministic model of the combat ship of study with DEVS, 3) modeling properties of each entity showing as stochastic errors. With this process, the gun-oriented engagement simulation system is developed and applied for the combat system under development.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권5호
• /
• pp.566-582
• /
• 2018

A moored barge alongside quay can be influenced by a nearby passing ship and its ship-generated waves. In this study, a time-domain numerical method based on a three-dimensional potential flow solver is developed to investigate the passing ship problem with a moored barge alongside quay. Potential flows around the passing ship and the moored barge alongside a quay is directly solved by using a classical finite element method. Total computational meshes including a passing ship, a moored barge and a quay is updated at each step with an efficient re-mesh algorithm. To validate the developed numerical method, a conventional ship wave problem and a passing ship problem on the open sea has been solved and the solutions are compared with the existing data. Then, a series of numerical computations were carried out to investigate the passing ship effect on a moored barge alongside quay. The characteristics of the passing ship effects are studied with varying the simulation parameters such as passing ship speed, separation distance, wall distances and waves. Focus is made on hydrodynamic forces due to the passing ship effect and its ship waves.

• 산업경영시스템학회지
• /
• 제35권1호
• /
• pp.101-106
• /
• 2012

Ship handling simulator is a virtual ship navigating system with three dimensional screen system and simulation programs. FTS simulation can produce theoretically infinite experiment tests without time constraint, but which results in collecting determinstic observations. RTS simulation can collect statistical observations but has disadvantage of spending at least 30 minutes for a single experiment. The previous studies suggested that the number of experiment conditions to be tested could be reduced to obtain random data with RTS simulation by focusing on highly difficult experiment condition for ship handling. It has the limitation of not estimating the distribution of ship handling difficulty for the route. In this paper, similarity and clustering analysis are suggested for reduction methodology of experiment conditions. Similarity of experiment conditions are measured as follows: euclidean distance of ship handling difficulty index and correlation matrix of distance differences from the designed route. Clustering analysis and multi-dimensional scaling are applied to classify experiment conditions with measured similarity into reducing the number of RTS simulation conditions. An empirical result on Dangin harbor is shown and discussed.

• International Journal of Ocean System Engineering
• /
• 제2권3호
• /
• pp.170-175
• /
• 2012

Currently, most logistics use containers. The construction of new port and high speed medium size container ship for the transportation of merchandise have become very important. The problem of ship stability is also important because of its direct influence on the loss of human life, ships, and merchandise. The stability of a container ship during its operation is not a large problem because it is well considered in the design process. However, the assessment of ship stability during container loading/unloading in port still depends on the expertise of experienced personnel. In this paper, a model based simulation system is introduced, which is able to assess ship stability during container loading/unloading, using ENVISION, a general purpose simulation system.

• 한국시뮬레이션학회논문지
• /
• 제19권3호
• /
• pp.17-25
• /
• 2010

선박 조종 시뮬레이션을 구성하는 기동 모델은 대상 선박의 동역학적인 특성을 현실에 가깝게 구현해야 하며, 신속한 계산 및 결과 처리가 가능하여야 한다. 다중 선박을 대상으로 하는 실시간 조종 시뮬레이션에서는 계산 시간 단축을 위해 일반적으로 선회각이나 선회율, 또는 전진 속도에 대한 1차 미분방정식 모델을 사용하여 선박의 움직임을 구현하게 된다. 본 논문에서는 대상 선박의 선회 시험 정보가 주어져 있을 경우 이를 이용한 선박의 단순 기동 모델링 및 계수 추정법을 제안하였다. 전진속도가 일정한 모델과 전진 속도의 변화를 고려한 모델의 계수 추정법을 수학적으로 전개하였으며, 실선 선회 시험 자료를 이용하여 제안된 모델의 유용성을 검증하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.35-40
• /
• 2006

For the maritime traffic safety assessment of vessels navigating in harbor or fairway, simulation techniques by using shiphandling simulator system have been traditionally used. When designing the simulation experiments and when analyzing the simulation results, however, there has been a little systematic method. Ship-handling simulations can be regarded as a kind of statistical experiment by using ship-handling simulator system, which means that shiphandling simulation conditions should be designed statistically and that the simulation results should be statistically analyzed as well. For the safe and economic design of harbor and fairway, reasonable decisions based upon the scientific analysis of shiphandling simulation results are indispensable. In this paper, various statistical methods, such as Bayes theorem, statistical hypothesis testing, and probability distributions, are reviewed with a view to application to maritime traffic safety assessment. It is expected that more reasonable decisions on harbor and fairway design can be made from shiphandlers' view point by using statistical methods.

• 수산해양기술연구
• /
• 제54권3호
• /
• pp.239-245
• /
• 2018

International Maritime Organization (IMO) has established standards for ship manoeuvrability and applied these standards for vessels over 100 meters in length that built since 2004 (IMO, resolution MSC.137[76]). These standards are no exception to fishing vessels. In this study we carried out a manoeuvring simulation of the new model ship (Stern trawler) of fisheries training ship of Pukyong National University based on Kijima's empirical formula. The formula takes into account of the effect of stern shape or does not take into account of the effect of stern shape. Also we checked whether the simulation results of turning motion of model ship meet IMO manoeuvrability criteria and then compared trajectories between the simulation results of model ship and the results of real sea trial test of the existing ship. In conclusion, Kijima's empirical formulas can estimate the manoeuvrability of fishing vessels at design stage approximately, it needs more parameters of fishing vessel own in case of expressing the manoeuvrability of fishing vessel accurately.