• Journal of Korea Port Economic Association
• /
• v.33 no.1
• /
• pp.61-74
• /
• 2017

The aim of this study is to analyze informatization competencies of the international ship supply companies at Busan port. This study comprehensively suggests certain issues attributed to the successful implementation of total information management system for ship supply. To achieve this objective, evaluation was undertaken based on the model of the National Competency Standards (NCS). This model consisted of three evaluation areas, including 20 items. Analysis of information competencies of ship supply companies was undertaken using the Importance-Performance Analysis (IPA) method. Survey data was collected from ship supply companies located in the ship supply center at Busan port. Results found that there were significant differences between importance and performance. In addition, overall informatization competency was very low. Thus, in order to ensure successful implementation of total information management system, re-education programs for ICT usage and dedicated support organization are necessary.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.553-559
• /
• 2015

The Korean Ship Supply market scale estimated at 5.7 trillion won in 2014. Much activated and related 400 of companies located in Busan, Ulsan near Busan area. But there have many companies had lower average revenue like a 2 billion won, Also the economic slump of world maritime port industry and low priced ship supply manufacture like as China and Other developing countries, those things made a gloomy situation in domestic industry. Therefore, in this study focused on Ship Supply Common Logistics for activation plan of Ship Supply Industry. And also determine which factor is most important to Ship Supply Common Logistics and analyzed AHP and IP analysis on 16 factors based on literature review. The result, most important factor was cost for Ship Supply Common Logistics.

• Fire Science and Engineering
• /
• v.22 no.4
• /
• pp.11-19
• /
• 2008

In order to show the most suitable ventilation conditions for the prevention of spontaneous combustion of small ship engine room, We have performed CFD simulation and analyzed flow and temperature fields. The flow patterns indicated differently according to the number and location of supply and exhaust opening. The case of locating the exhaust openings at the center of left and right side ceiling to the longitudinal symmetric line were more effective to eliminate the generated heat. When the number of supply and exhaust openings were increased, the case of increasing the number of exhaust opening showed more suitable ventilation conditions. The most suitable ventilation conditions in order to prevent the spontaneous combustion of small ship engine room was predicted that the supply opening located at the center of front and after side ceiling to across symmetric line, and the exhaust opening located at the center of both side walls.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.1
• /
• pp.1-9
• /
• 2017

LNG has significant advantages in regard to environmental aspects comparing with conventional fuel oil. In fact, it is estimated that NOx and SOx emission can be reduced by about 90% and 100%, respectively in case of using LNG as a fuel. LNG-fuelled ship has been considered to be the best option both from an environmental and an economic point of view. Along with these trends, some major shipyards and Classification Societies have started to carry out the risk-based system design for LNG-fuelled ship such as passenger ship, platform supply vessel and large container vessel etc. However, new conceptual gas fuelled ship has high risk level compared with vessel using traditional crude oil especially in view of gas explosion accident. Therefore safety area where installed fuel gas supply system is required risk based system design with special considerations. On this paper, the entire process necessary for the quantitative risk analysis was explained to meet the satisfactory safety level of gas fuelled ship.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.75-81
• /
• 2011

An indirect concept and method is proposed to predict the paint dry time at the inside wall of ship block. To implement this concept on computer program, optimal hot air supply-exhaust system of paint dry facility was designed by CFD simulation and experiment was performed to get the paint dry time curve according to various paint dry conditions. After combining the block inside environment from the simulation results and the paint dry time prediction curve from the curve-fitting of experimental result, the GUI program which can be executed in general PC OS has been finally developed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.249-250
• /
• 2015

2014년 우리나라 선용품 시장의 규모는 5조 7천400억 원 정도로 추정된다. 대부분이 부산, 울산 등 부산권에서 이뤄지지만 관련업체가 400여 개나 난립해 대부분 평균 매출이 20여억 원으로 영세한 수준이다. 또한 세계 해운항만산업의 불황과 중국을 비롯한 개발도상국들의 저가 선용품의 생산 및 공급으로 인해 국내 선용품 업계가 그다지 밝지 않는 상황이다. 이렇듯 영세한 선용품 산업을 발전시키기 위해서 부산시에서는 부산항국제선용품유통센터 내에 공동물류(창고)를 운영을 제시하였으며 이를 세부적으로 파악하기 위해 성공적 방안 요인 16개의 도출하여 AHP와 IP분석을 사용하여 전략적 방안을 제시하였다.${\cdots}$ (중략) ${\cdots}$.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.1
• /
• pp.1-12
• /
• 2021

As increasing the international community's awareness of greenhouse gas reduction, the demand for eco-friendly ship fuel has accelerated recently. The fundamental aim of this study is to develop a new type of fully electrified ferry for passengers and cars considering Korean domestic coastal environmental conditions. Several technical difficulties are encountered in applying a fully electric propulsion system based on removable battery systems into a ship due to limitations imposed by the batteries' size and capacity. This paper reviews and analyzes marine environment regulations strengthened recently, technology trends related to fully electric propulsion vessels in each country, and Korean domestic coastal environments. We propose a new fully electrified car ferry design with a displacement of 400 t applied in Korea. It is powered by removable battery systems pre-charged in a safe inland charging station. The mobile battery system is developed to enable roll-on and roll-off using wheels. The characteristics of the ship motion are analyzed based on the weight and location of the battery systems. We expect our battery systems to be applicable to larger ships in the future.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.843-851
• /
• 2022

This paper was conducted to study the conditions for the manufacture and operation of artificial snow removal and ice-making test facilities so that the test equipment can be tested in a low-temperature environment using the polar environment performance test facility. The polar environment performance test Facility is designed to artificially simulate extreme environments up to -65 ℃, and is a mid-to-large low-temperature environment test facility that can perform performance tests on offshore plant equipment, ships, leisure, and offshore structures. To verify the safety of deck work of ships operating in polar environments, artificial snow removal and artificial ice making devices were manufactured, and we conducted research on various operating environments using these facilities. For the efficient operation of artificial snow and ice making facilities, it is important to continuously supply dry air, and it has been found that installing an additional heater at the tip of the nozzle is effective in preventing freezing.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.799-810
• /
• 2022

Welding work is a production work method widely used throughout the industry, and various types of welding technologies exist. In addition, many methods are being studied to automate these welding operations using robots, but in the ship manufacturing field, welding such as painting, cutting, and grinding is also the most common operation, but the manual operation ratio is higher than in other industries. Such a high manual labor ratio in the field of ship manufacturing not only causes quality problems and production delays according to the skill of workers, but also causes problems in the supply and demand of manpower. Therefore, this paper analyzed the reason why the automation rate is low in welding work at ship manufacturing sites compared to other industries, and analyzed the production process and field environment for small and medium-sized ship manufacturing companies that repeatedly manufactured with a small quantity production method. Based on the analysis results, it is intended to propose a robot system that can easily move between workplaces and secure uniform welding quality and productivity by collaborating simple welding tasks with humans. Finally, the simulation environment is constructed and analyzed to secure the suitability of robot system application to current production site environment, work process, and productivity, rather than to develop and apply the proposed robot system. Through such pre-simulation and robot system suitability analysis, it is expected to reduce trial and error that may occur in actual field installation and operation, and to improve the possibility of robot application and positive perception of robot system at ship manufacturing sites.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1808-1817
• /
• 2017

Duties required for naval ship such as anti-submarine, anti-ship, and supply, etc are diversified, so the ECS (Enfineering Control System) is required for executing the mission effectively. The ECS monitors and controls the propulsion system in order that naval ship can perform the mission. As the in-country development of ECS is progressed, a test system for ECS is needed, and a naval ship propulsion system simulator based on CODOG was developed on this study. The naval ship propulsion system simulator based on CODOG which is divided into gas turbine model, diesel engine model, reduction gear model and controllable pitch propeller model, simulates to feedback of control commands of ECS. As a result of the experiment, it is able to confirm speed, torque and power, etc. of the gas turbine, diesel engine and shaft according to ECS propulsion mode.