• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.3
• /
• pp.204-215
• /
• 2008

Many researches for service-life of chemical cartridges of respirators have been performed in many countries. On the result of these researches a few softwares programs were eventually developed to be used. In spite of that, it is difficult to apply these researches and softwares practically in the work spot because of too many factors that influence on service-life of chemical cartridges. This study was the first of two conducted for the purpose of developing program for estimating exchange period or service-life of chemical cartridges available feasibly in the workplaces. Collecting plan of cartridges discarded after use is in principle that three cartridges from three workers at a time, three steps of 1/2 exchange time due to smelling, just routine exchange time and 1.2 to 1.3 expanded time of routine exchange, total nine cartridges are collected in the same job site. 33 cartridges for organic vapor were collected in paint spray process of ship yard and paint factory, and 6 cartridges for acid were collected in plating process. These cartridges were analysed the remaining breakthrough time in 3M Innovation Center. Challenge vapor and breakthrough concentration were complied with Korean regulation for chemical cartridge respirators. Estimated breakthrough time was determined from previously used time plus breakthrough time for the remaining. Exchange period of cartridge would be the shortest time among three estimated breakthrough times. On the result breakthrough time for organic vapor was found to be relatively easily estimated, but that for acid aerosol or vapor was difficult to be confident. Even though this method was difficult to be precisely predicted exchange period of cartridge, it could be an alternative program practically available in the job site.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.180-184
• /
• 2016

Legislative and regulatory actions regarding the exhaust gas from ships are being strengthened by both international organizations and national governments, to protect human health and the environment. Exhaust gas traps are excluded from exhaust gas regulation applications, but, recently, the United States, Britain, and other developed countries have examined a variety of ways to improve the system, including the introduction of electric propulsion systems to prevent air pollution generated by naval ships. This study investigates a large number of smoke problems of naval diesel engines to verify the effect of improving the nozzle characteristics. An exhaust gas emission measurement method to determine the quality of pollutant exhaust gas generated during low-load operation is proposed through the research methodology of the smoke problem. It was confirmed that the emissions value is improved by decreasing the nozzle hole diameter and increasing the injection pressure. At the same time, the flow rate decrease equation and setting up a test memo based on the nozzle diameter confirmed that the fuel consumption, to which the nozzle diameter in the flow path is related, is reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2061-2066
• /
• 2011

A cycloid speed reducer is one of the rotational speed regulation devices of the machinery. A cycloid speed reducer has an advantage of transmitting high torque, but is known to be unsuitable for high speed rotation. However, it is almost impossible in an analytical method to find a use limit speed when installing such a speed reducer in a 200ton loading transporter. In this research the cycloid reducer was simulated to get its performance depending on friction energy loss in time domain by using by LS-DYNA. The maximum torque of the cycloid speed reducer is 3.5ton-m, so the comparison of analysis results between a case of 60rpm rotation and a case of 162rpm rotation with such a torque showed the following results. In the case of 60rpm rotation, the maximum stress appearing in the RV gear and the pin gear was 463MPa and 507MPa. Lost power due to friction was 50kW; In the case of 162rpm rotation, the maximum stress appearing in the RV gear and the pin gear was 550MPa and 538MPa. Lost power due to friction was 175kW, which was shown to be almost impossible to use.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.1
• /
• pp.39-61
• /
• 1994

GMDSS(the Global Maritime Distress and Safety System), which is utilizing recently developed systems such as satellite communications and positioning system, digital communication system, computer and microelectronics technology, etc., has been adopted by International Maritime Orgnization(IMO) and coordina-ted with such organization as the International Telecommunication Union(ITU), World Meteorological Organizatoion(WMO), etc. This system took effect partly on February 1st 1992 according to the 1988 SOLAS Amemdments and, after some more complementary measures, will be fully operational by February 1st 1999. Comparing with the existing communication system, the new system is mainly based on the latest scientific technologies, and therefore overall countermeasure will be necessary to accept the system reasonably. GMDSS will transform the current communication system basically and be the major factor to change the demand and supply of personnel for radio communication. To cope with the system assertively, regulations relating to the radio installation, the posting of radio operators, the bounds of their duty, etc. must be established and the demand and supply of radio operators to meet the system must be accomplished pertinently. Moreover, the technique and quality of the person-nel responsible for the system must be upgraded to carry out the obligations by international regulations as well as to ensure the safety of life and property at sea. Looking into the actual situations of our country, every regulation relating to the GMDSS has been improved, but the concerned educational institutions and administrations have not yet prepared the rational and concrete schemes on the educational methods and adquate procedures for the system. Therefore, in this thesis, the author intends to propose directions for improving the courses and contents of education of the relating educational institutions and to suggest rational schemes for balancing the demand and supply of personnel to the administrative anthorty concerned.

• Journal of Korea Port Economic Association
• /
• v.23 no.1
• /
• pp.95-113
• /
• 2007

Recently, International institution such as IMO and major maritime countries have introduced various regulations and steps to reduce port pollution. However, recognition of environmental pollution from ports is not sufficient for Korean policy makers and port communities. The purpose of this paper is to examine solutions to port pollution problems and suggests some implications to Korean ports to become a green port. To this aim, necessity of regulation on environmental pollution from port operation; literature survey on port's environmental pollution; current conditions of international port pollution; various regulations and policies governing major ports are conducted in this paper. Our main findings are as follows; first, air pollution from ship can be reduced by providing electric power at docks while at berth, Second, in case of cargo-handling equipment, retire old equipment and switch to cleaner fuel such as low-sulfur fuel and diesel emulsions. Third, offering incentives for the installation of pollution controls and minimizing idling by enforcing idling limits or by installing idle shutoff controls can be recommended for reduction of air pollution of truck and rail at ports.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.233-239
• /
• 2014

The accurate engine output is basically one of important factors for the analysis of engine performance. Nowadays in-cylinder pressure analyzer in internal combustion engine is also an indispensable tool for engine research and development, environment regulation and maintenance of engine. The combustion analysis is desperately needed in order to induce a correct judgment on the condition of the engine and suggest the specific ways to improvement as well as the correct engine output. And these tool is advantageous to reduce fuel consumption and maintenance of the engine. In this study, using the developed measuring kit, combustion analysis of marine generator engine which was adapted as test engine was carried out. It was verified that the good operation condition of the engine as well as contributing to fuel savings by checking and readjusting accurately the irregular combustion of the test engine were accomplished. From the results all above, it was recognized that the measuring kit by new method for engine output was developed and verified for its utilities.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.7
• /
• pp.89-97
• /
• 2020

Container vessels continue to grow in size, led by global shipowner. Large ships can be loaded more cargo at a time, reducing the cost of transportation per teu. this eventually leads to economies of sale, in which the production cost per unit decreases with increasing output. in accordance with the 70th Convention of the Marine Environment Protection Committee of the International Maritime Organization, as of January 1, 2020, MARPOL Annex VI Regulation 14.1.3 will be effective. All vessels must be meet these criteria to reduce Sox emissions and reduce NOx emissions by reducing the content of manned sulfur oxides from 3.5% to less than 0.5%, otherwise IACS Member States Entry to the port is denied. in order to do that need to LNG storage tank. in this study characteristic of the material after line heating (600℃,700℃,800℃,900℃) of 9% Ni steel used in the manufacture of LNG fuel tank of ship were verified using by mechanical test. In the heating method by line heating. The initial properties of steel are changed by variables such as temperature, time, speed. The experimental data of line heating presented in this paper confirmed that the initial change of 9% Ni steel could be minimized.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.183-192
• /
• 2020

This study conducted the experiment for the development of the low pressure type SCR system. The experimental equipment of SCR system was installed, which was widely used as the nitrogen oxides abatement system, and the demonstration experiment was conducted to see that it met the Tier III regulation according to the IMO NOx Technical Code. The SCR system demonstration experiment was divided into three stages: SCR system component operation test, engine parameter test by engine load, and NOx abatement performance and ammonia slip verification test. The final performance of the SCR system was verified through analysis of NOx abatement performance and ammonia slip test results for each load variation.

• Water for future
• /
• v.28 no.6
• /
• pp.183-191
• /
• 1995

Applying microwave, a velocity measurement system has been developed in order to measure the velocity of stream water surface. It's main purpose is the measurement for high velocity of flood water. It is under the developing stage of experimental measurement system. The microwave surface velocity meter uses Doppler effects of microwave. It consists of a radio frequency(RF) part and that of signal processing. Thr RF part has the function of microwave oscillation, reception of reflected wave, and determination of Doppler frequency, etc. Signal processing designates amplification, fast Fourier transform, etx. Various measuring experiments were performed at bridges and a spillway of Taechong re-regulation dam with the microwave velocity meter. Verification test was also made through water tank of ship model test at Research Institute of Ships and Ocean Engineering. It shows 4% error inherent in A/D converter and additional several percentage errors from measurement circumstance. The measuring ranges are from 0.5 to 3.5 m/s. The result shows good linear relationship between carriage velocity and measured velocity, thus proves usefulness as a measuring instrument for flood water velocity. The instrument requires overall re-engineering procedure and number of data should be accumulated and analyzed to treat wind effects and random fluctuations of water surface.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.4
• /
• pp.925-935
• /
• 2016

It is provided that seafarers qualified in accordance with STCW(International Convention on Standards of Training Certification and Watch-keeping for Seafarers) convention and code in safety training shall be required, every five years, to provide evidence of having maintained the required standard of competence, to undertake the tasks, duties and responsibilities listed in Chapter VI, section A-VI/1 of the STCW Code A. Every party to the STCW Convention has amended the relevant national regulations according to the above international convention and code. These amended Seaman's Act require the updating safety training which is only five years valid for existing seafarers serving onboard ship on international voyage. And above specified existing seafarers must, as of the 1st January 2017, have documentary evidence of either having completed the training course or updated their training within the last 5 years. In relation to the above international trend, the Korean Ministry of Oceans and Fisheries also has completed an amendment to its Seaman's Act. But, the Korean Seaman's Act has a supplementary provision to exempt the seafarers who have completed STCW advanced safety training from basic safety training. The purpose of this study is to define the problems of above mentioned exemption provisions and to make better policies for improvement. In order to complete the purpose, the research team has conducted an in-depth survey of various foreign cases on STCW safety training. Moreover, the team has suggested an improvement scheme in consonance with Korean shipping industry and society through out this report.