• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.1-5
• /
• 2009

Recent growth in global economic situation has led dramatic increase in new buildings of large containerships. These increased new building orders have brought keen concerns of developing and improving the quality of design and increasing the productivity of the vessel in order to satisfy the ship Owner's various requirements. For the increment of productivity and quality of containership, the plastic type bearing pad of cargo hatch cover has been investigated intensively for years with the supplier of cargo hatch cover. The result of investigation showed that there are numbers of advantages for the Owner and Builder over the existing bronze bearing pads which are better corrosion resistance long life time, low friction coefficient, easy maintenance, easy installation, better production lead time and low maintenance cost.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.3
• /
• pp.167-176
• /
• 2013

It is necessary to construct equipment catalog in ship outfitting design and offshore plant design. The three-dimensional CAD data of equipment take on different level-of-detail depending on the purpose. Equipment suppliers provide CAD data with high complexity while ship designers need CAD data with low complexity. Therefore, it is necessary to simplify CAD data. However, it takes much time to simplify them manually. To resolve the issue, a system for automatically simplifying the 3D CAD data of equipment was developed. This paper presents the architecture of the system and the implementation details. In addition, experiment result using the prototype system is explained.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.70-74
• /
• 2011

This paper describes the quay mooring analysis to verify the safety of a moored drillship in typhoon conditions. Mooring system consists of mooring equipments(deck bollards, shore bitts, mooring lines, fenders) to resist the extreme environmental condition. Wind force acting on the drillship is obtained from the wind tunnel test results. The strength of quay mooring system has been checked. The static mooring analysis shows that the designed mooring system satisfies the mooring design criteria. Vertical displacements of the drillship have been calculated considering the dynamic wave motions and static heelings due to the wind force acting on the ship. With the vertical displacements and the hull draft of drillship, the required water depth for quay mooring has been derived.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.30-37
• /
• 1992

Since a ship is a complex steel construction which consists of sculptured surfaces and inner surface members, a high technique of information modeling is indispensable to describe the form of hull surface and steel structure members consistently. A model contains both topological and geometrical information of the structural members. Therefore, the hull form should be represented by the wireframe of surface model so that the accuracy in each design stage is satisfied. The structural members like plane surfaces, stiffeners and the relations between such members are to be described systematically in data base. A collection of the data stored in database is a model to be built. The model will be used not only to generate the drawings and documents for ship design and production but also to interconnect other systems such as compartmentation, outfitting, piping, etc. Computer graphics is adopted of the visualization of model.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.3
• /
• pp.207-215
• /
• 2011

Due to its large size, a ship is first divided into scores of blocks and then each block is constructed through various shops, such as the assembly shop, the painting shop, and the outfitting shop. However, each block may not be directly moved to the next shop and may be temporarily laid on a block stockyard because the working time in each shop is different. If blocks are laid on the block stockyard without any planning, the rearrangement of the blocks by a transporter are required because the blocks have the different in and out time. In this study, an optimal layout method based on the genetic algorithm was proposed in order to minimize the rearrangement of the blocks in the block stockyard. To evaluate the applicability of the proposed method, it was applied to a simple layout problem of the block stockyard.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.3
• /
• pp.468-477
• /
• 2013

An automatic pipe routing system is proposed and implemented. Generally, the pipe routing design as a part of the shipbuilding process requires a considerable number of man hours due to the complexity which comes from physical and operational constraints and the crucial influence on outfitting construction productivity. Therefore, the automation of pipe routing design operations and processes has always been one of the most important goals for improvements in shipbuilding design. The proposed system is applied to a pipe routing design in the engine room space of a commercial ship. The effectiveness of this system is verified as a reasonable form of support for pipe routing design jobs. The automatic routing result of this system can serve as a good basis model in the initial stages of pipe routing design, allowing the designer to reduce their design lead time significantly. As a result, the design productivity overall can be improved with this automatic pipe routing system.

• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.62-67
• /
• 2015

A very large shell-structure built in shipyards like ship hulls or offshore structures are joined by welding through full process. As the welding contains a high thermal cycle at a local area, the welded structures should be distorted unavoidably. Because a distorted ship block should be revised to the designed value before the next stage, the ability to predict and to control the weld distortion is an accuracy level of the yard itself. Despite the ship block size, several present thermal distortion methodologies can deal those sizes, but it is a different story to deal full ship size model. Even a fully constructed ship hull not remaining any welding can have an accuracy issue like outfitting installation problems. Any present thermal distortion methodology cannot accept this size for its recommended element size and the number. The ordinary welding breadth at erection stage is about 20~40 mm. It can hardly be a good choice to make finite element model of these sizes considering human effort and computational environment. The finite element model for structure analysis of a ship hull is prepared at front-end engineering design stage which is the first process of the project. The element size of the model is as fine as the longitudinal space, and it is not proper to obtain a weld distortion at the erection stage. In this study, a methodology is suggested that a weldment can be shrunk at original place instead of using structural finite element model. We cut the original shell elements at erection weld-line and put truss elements between the edges of cut elements for weld shrinkage. Additional truss elements are used to facsimile transverse weld shrinkage which cannot be from the weld-line truss element shrink. They attach to weld-line truss element like twigs from barks. The capacity of developed elements is verified through an accuracy check of erection process of a container vessel at the apt. hull. It can be a useful tool for verifying a centering accuracy after renew and for block-separating planning considering accuracy.

• Journal of Information Technology Application
• /
• v.1
• /
• pp.99-127
• /
• 1999

Under the concept of global economy, the enterprises are assigning design and production environments around the world in different areas. A serious problem of information exchange emerges as companies use traditional hardware and very distinct softwares appropriate to their field of expertise. To overcome the decreased productivity due to the interruption of information, the concept of simultaneous engineering and concurrent design becomes very significant. In this article, an agent-based ship design system is developed in order to support a cooperation in distributed ship design environments. Above all, the conflicts that occur in the middle of knowledge sharing in the system must be resolved. An approach to do this is the case-based conflict resolution strategy formulated to resolve current conflict on the basis of previous resolved similar cases in agent-based collaborative design system environments. To do this conflict cases that occur in initial ship design stage are extracted. On the basis of the extracted cases, case-base is constructed. In addition conflict resolution handler located in the facilitator is developed to treat conflict problems effectively by reasoning of the case-base and thus presenting an appropriate solution. The validation of developed case-based conflict resolution strategy is evaluated by applying to collaborative design process in initial ship design stage, especially the machinery outfitting design, the preliminary design, the hullform design, and the structural design. Through the help of the cooperation of the design agents, the facilitator, the conflict resolution handler, and the case-based system, a designer can be supported effectively in his/her decision-making based on the previous cases resolved similarly.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.519-526
• /
• 1994

In the large and multifunctional engineering system, the heterogeneous computer system situation is inevitable. Accordingly a lot of integration efforts are being made to comply with the industrial requirement of productivity. In this paper, a practical concept of integration is introduced through the development of a prototype system for ship outfitting design which is a typical example of large/multi-functional application system. On the development of the prototype system, three points are considered as a practical concept-which are integration of database, integration of application programs, and system-user interface. The relation model based commercial database management system(RDBMS) is used to build the project integrated database, and the graphical user interface tool(OSF/Motif) on X-window system is used for the integration of application programs and the user interface.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.32-37
• /
• 2017

Due to the nature of semi-submergible drilling rig, various equipments are arranged in a limited space, and therefore the many types of outfitting holes passing through the hull structure are densely arranged and that is required the detailed structural strength evaluation in terms of ULS and FLS by class or client. Particularly, semi-submergible drilling rig has a variety of global load which affects the structure strength around holes compared to general commercial ship, and its response of stress is also complicated, so it is difficult to carry out the prediction design of structural strength evaluation and reinforcement. In this regard, this paper presents a case study on the evaluation of structural strength for the various holes and large openings of semi-submergible drilling rig conducted by our company, as well as an established hole verification procedure.