• 한국항해항만학회지
• /
• 제41권5호
• /
• pp.345-352
• /
• 2017

Recently, a new port reserves deep water depth for safe navigation and mooring, following the trend of larger ship building. Larger port facilities include long and huge breakwaters, and mainly adopt vertical type considering low construction cost. A vertical breakwater creates stem waves combining inclined incident waves and reflected waves, and this causes maneuvering difficulty to the passing vessels, and erosion of shoreline with additional damages to berthing facilities. Thus, in this study, the researchers have investigated the response of stem waves at the vertical breakwater near the entrance channel and applied numerical models, which are commonly used for the analysis of wave response at the harbor design. The basic equation composing models here adopted both the linear parabolic approximation adding the nonlinear dispersion relationship and nonlinear parabolic approximation adding a linear dispersion relationship. To analyze the applicability of both models, the research compared the numerical results with the existing hydraulic model results. The gap of serial breakwaters and aligned angles caused more complicated stem wave generation and secondary stem wave was found through the breakwater gap. Those analyzed results should be applied to ship handling simulation studies at the approaching channels, along with the mooring test.

• 정보과학회 논문지
• /
• 제42권7호
• /
• pp.846-851
• /
• 2015

풍파와 너울은 바다 표면 시뮬레이션에 있어 가장 기본이 되는 파도로 해상 공간 배경의 시뮬레이터 구축에 매우 중요한 요소이다. 본 논문에서는 선박운항 시뮬레이터와 같은 실시간 시뮬레이터에 활용을 목적으로 서로 다른 시각적 특성을 가진 풍파와 너울에 대해 각각의 특성을 사실적으로 재현할 수 있는 실시간 시뮬레이션 방법을 제안하였다. 풍파에 비해 파장이 길고 마루가 둥근 너울은 절차적 방법을 통해 전역적으로 가시화 하였으며, 너울 가시화에 필요한 파라미터는 해양파 스펙트럼으로부터 추출하여 적용 하였다. 그리고 근거리에서 관측 시 그 특징이 잘 나타나는 풍파는 적용 가능 범위는 좁으나 사실적 시뮬레이션에 강점을 가진 해양파 스펙트럼 기반의 통계적 파도 모델을 활용하여 가시화 하였다.

• 선박안전
• /
• 통권23호
• /
• pp.78-97
• /
• 2007

SPM, which is an abbreviation of Single Point Mooring, also called as SBM(Single Buoy Mooring), is a special buoy besides the quays of the harbor for mooring ships, and is normally a 3m wide cone or cylinder shaped steel drum fixed underwater so it won't move, and is used for mooring cargo-work at outer port by laid-up ships and large crude oil carrier. The work of VLCC SPM mainly is accomplished on the open sea. On the open sea as a result of meteorological condition and the ocean wave influence, When the weather condition is get bed, peremptorily moving to the safety place, because of the gale and the billow, almost happened frequently, the pilot is unable to go on board and the tug is also unable to be used Now because of the bad weather the VLCC SPM moving to the other safety place frequently happened in the ulsan port. the construction of new harbor, it constructed many break water around SPM. So that it is necessary to propose the new standard about how to maneuvering area actually. The standard for handling ranges of the SPM operations was tested and verified by a simulation.. So that it is necessary to propose the new standard about how to maneuvering area actually.

• Journal of Ship and Ocean Technology
• /
• 제6권2호
• /
• pp.23-36
• /
• 2002

This paper describes the powering, seakeeping and maneuvering performances for a 2,500-ton class trimaran. Influence of the side-hull forms and location of those in longitudinal and transverse direction to resistance performance was systematically investigated by a series of model tests and numerical calculations. It was found that the longitudinal location of side-hulls was the most influential design parameter to the resistance performance of the trimaran and the optimum location of side-hull depends on ship speeds. When the side-hull stem is located near the primary wave hollow generated by the main hull, the trimaran shows the best resistance performance. Powering performance of the trimaran is superior to those of similar mono-hull ships. Seakeeping model tests for the trimaran were executed and the results were compared with the theoretical results of a similar mono-hull ship. Generally speaking, seakeeping performance of the trimaran is superior to that of a mono-hull ship. In particular, pitching and rolling performance of the trimaran is excellent, which is due to the increased length and breadth. Maneuvering model tests using a HPMM equipment were executed to evaluate the maneuvering performance of the trimaran. Maneuvering simulation was performed using the maneuvering coefficients from the model tests. The results show that the control ability of heading angle and the direction keeping stability of the trimaran is excellent, even though the turning performance is rather worse compared to those of a similar mono-hull ship.

• 한국해양공학회지
• /
• 제18권3호
• /
• pp.8-12
• /
• 2004

The anchor is laid on the seabed, and the main engine is working against incident environmental loads in a typhoon. As the main engine is broken Mum in the storm, the anchor chain is cut and the vessel drifts. Although a ship is moored by two-point mooring lines to maintain her position, it has crashed into a rock because of a typhoon, resulting in a possible accidental oil spillage. In this paper, we studied maintenance of a ship's position, which is analyzed based on the slow motion maneuvering equations considering wave, current, and wind. To estimate wave loads, the direct integration method is employed. The current forces are calculated, using MMG (Mathematical Modeling Group). Th two-point mooring forces are quasi-statistically evaluated, using the catenary equation. Th coefficients of wind forces are modeled from Isherwood's empirical data, and the variation of wind speed is estimated by wind spectrum. The nonlinear motions of a two-point moored ship are simulated, considering wave, current, and wind load, in specific domain of time.

• 한국항해항만학회지
• /
• 제37권1호
• /
• pp.63-69
• /
• 2013

Since most merchant vessels are mainly influenced by the added resistance in an actual sea, they could be navigated more efficiently if this added resistance could be precisely predicted and then effectively reduced. In this paper, we have computed the effective horsepower based on the resistance performance in still water and then calculated the added resistance in regular wave in order to estimate a ship's propulsion performance on a voyage. Firstly, we have performed experiments using a model of KCS in a circulating water channel to estimate the flow characteristics around a container ship and the ship's resistance in still water. Then we have calculated the motion response function in regular wave as well as the values for the increase in resistance, and evaluated the ship's motion performance in waves according to the calculated response function. It was found that the resistance in waves increased because the ship's motion response value became larger as the ship's speed increased in the case of head sea. The effect of the added resistance could be reduced by maneuvering the ship to the encounter angle of $120^{\circ}$ in areas of long wavelengths and to head sea in areas of short wavelengths.

• Journal of Advanced Research in Ocean Engineering
• /
• 제4권2호
• /
• pp.53-65
• /
• 2018

The load condition significantly influences ship maneuverability in calm water. In this research, the effect of the load condition on turning performance of a very large crude oil carrier (VLCC) sailing in adverse weather conditions is investigated by an MMG-based maneuvering simulation method. The relative drift direction of the ship in turning to the wave direction is $20^{\circ}-30^{\circ}$ in ballast load condition (NB) and full load condition (DF) with a rudder angle $35^{\circ}$ and almost constant for any wind (wave) directions. The drifting displacement in turning under NB becomes larger than that under DF at the same environmental condition. Advance $A_d$ and tactical diameter $D_t$ become significantly small with an increasing Beaufort scale in head wind and waves when approaching, although $A_d$ and $D_t$ are almost constant in following wind and waves. In beam wind and waves, the tendency depends on the plus and minus of the rudder angle.

• 한국항해항만학회지
• /
• 제27권1호
• /
• pp.55-61
• /
• 2003

계류된 선박의 시뮬레이션을 위해 조종방정식을 사용하였고, 파 중의 선박에 가해지는 파강제력은 3차원 특이점 분포법에서 얻어진 주파수 전달함수로부터 시간영역해석법을 적용하였다. 운동을 유발하는 입사파의 주기와 동일한 선형 파강제력과 성분파 주파수의 차이에 기인하는 장주기 표류력을 외력항에 고려하였다. 규칙파와 불규칙 중에서의 선박의 거동을 비교하여 계류 중 선박에 발생할 수 있는 SLEW MOTION에 불규칙파 및 비선형 파강제력이 미치는 영향을 고찰하였다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2005년도 추계학술대회지
• /
• pp.21-26
• /
• 2005

VLCC SPM 작업이 주로 이루어지는 외해에서는 기상상태 및 파랑 영향을 많이 받고 있다. 기상악화로 인한 비상 이안시에는 강한 바람과 높은 파고로 도선사의 승선이 불가능하고 예인선을 사용할 수 없는 경우가 대부분이다. 현재 울산항에서는 기상악화로 인한 VLCC의 SPM 비상이안이 빈발하고 있으며, 신항만 건설로 SPM 주위에 방파제가 건설됨에 따라 SPM 이안 선박의 조종영역 기준을 제시할 필요성이 대두되고 있다. 현재 우리나라에는 SPM 설치 기준이 없으며, 외국의 설치기준을 참조하고 있지만, 이 기준들이 일관성 및 근거가 부족한 실정이다. 따라서 울산항의 SPM 비상이안 선박들의 조종영역 실태를 AIS 항해 테이터를 이용하여 파악하여 선박의 조종 영역 기준을 제안하고자 한다.

• Ocean Systems Engineering
• /
• 제7권4호
• /
• pp.435-460
• /
• 2017

The main objective of this study is to investigate the turning and zig-zag maneuvering performance of the well-known naval surface combatant DTMB (David Taylor Model Basin) 5415 hull with URANS (Unsteady Reynolds-averaged Navier-Stokes) method. Numerical simulations of static drift tests have been performed by a commercial RANS solver based on a finite volume method (FVM) in an unsteady manner. The fluid flow is considered as 3-D, incompressible and fully turbulent. Hydrodynamic analyses have been carried out for a fixed Froude number 0.28. During the analyses, the free surface effects have been taken into account using VOF (Volume of Fluid) method and the hull is considered as fixed. First, the code has been validated with the available experimental data in literature. After validation, static drift, static rudder and drift and rudder tests have been simulated. The forces and moments acting on the hull have been computed with URANS approach. Numerical results have been applied to determine the hydrodynamic maneuvering coefficients, such as, velocity terms and rudder terms. The acceleration, angular velocity and cross-coupled terms have been taken from the available experimental data. A computer program has been developed to apply a fast maneuvering simulation technique. Abkowitz's non-linear mathematical model has been used to calculate the forces and moment acting on the hull during the maneuvering motion. Euler method on the other hand has been applied to solve the simultaneous differential equations. Turning and zig-zag maneuvering simulations have been carried out and the maneuvering characteristics have been determined and the numerical simulation results have been compared with the available data in literature. In addition, viscous effects have been investigated using Eulerian approach for several static drift cases.