• 한국구조물진단유지관리공학회 논문집
• /
• 제23권2호
• /
• pp.20-27
• /
• 2019

건전자제품의 개발과 생산기술에 비교하여 폐유리의 재활용을 위한 기술개발은 상대적으로 미흡하여 자원낭비와 환경오염이 가속화되고 있다. 해외에서는 이 분야에 대한 기술개발이 활발하게 이루어지고 있으나 국내의 경우, 그 관심도가 부족하여 폐유리를 불법투기 또는 매립으로 처리하고 있는 실정이다. 폐유리는 시멘트와 수화반응시 포졸란 반응가능성이 있는 것으로 확인되어 경화 콘크리트의 물리적 성질을 향상시키고 굳지 않은 콘크리트의 레올로지 특성을 개선하여 블리딩의 저감 및 수화열 발생의 억제 등에 효과적인 것으로 보고되고 있다. 따라서 본 논문에서는 폐유리를 잔골재로 사용한 차폐콘크리트의 알칼리-실리카반응이 팽창에 미치는 영향을 분석하고 폐유리 혼입에 의한 알칼리-실리카반응의 팽창을 억제하기 위한 방안으로 적정 혼화재료를 사용하여 차폐콘크리트의 내구성능을 평가하였다.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.269-274
• /
• 2022

An artificial neural network (ANN) that identifies radionuclides from low-count gamma spectra of a NaI scintillator is proposed. The ANN was trained and tested using simulated spectra. 14 target nuclides were considered corresponding to the requisite radionuclide library of a radionuclide identification device mentioned in IEC 62327-2017. The network shows an average identification accuracy of 98.63% on the validation dataset, with the gross counts in each spectrum N_c = 100~10000 and the signal to noise ratio SNR = 0.05-1. Most of the false predictions come from nuclides with low branching ratio and/or similar decay energies. If the N_c>1000 and SNR>0.3, which is defined as the minimum identifiable condition, the averaged identification accuracy is 99.87%. Even when the source and the detector are covered with lead bricks and the response function of the detector thus varies, the ANN which was trained using non-shielding spectra still shows high accuracy as long as the minimum identifiable condition is satisfied. Among all the considered nuclides, only the identification accuracy of ²³⁵U is seriously affected by the shielding. Identification of other nuclides shows high accuracy even the shielding condition is changed, which indicates that the ANN has good generalization performance.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권2호
• /
• pp.43-55
• /
• 2015

In the case of satellite navigation positioning, the shielding of satellite signals is determined by the environment of the region at which a user is located, and the navigation performance is determined accordingly. The accuracy of user position determination varies depending on the dilution of precision (DOP) which is a measuring index for the geometric characteristics of visible satellites; and if the minimum visible satellites are not secured, position determination is impossible. Currently, the GLObal NAvigation Satellite system (GLONASS) of Russia is used to supplement the navigation performance of the Global Positioning System (GPS) in regions where GPS cannot be used. In addition, the European Satellite Navigation System (Galileo) of the European Union, the Chinese Satellite Navigation System (BeiDou) of China, the Quasi-Zenith Satellite System (QZSS) of Japan, and the Indian Regional Navigation Satellite System (IRNSS) of India are aimed to achieve the full operational capability (FOC) operation of the navigation system. Thus, the number of satellites available for navigation would rapidly increase, particularly in the Asian region; and when integrated navigation is performed, the improvement of navigation performance is expected to be much larger than that in other regions. To secure a stable and prompt position solution, GPS-GLONASS integrated navigation is generally performed at present. However, as available satellite navigation systems have been diversified, finding the minimum satellite constellation combination to obtain the best navigation performance has recently become an issue. For this purpose, it is necessary to examine and predict the navigation performance that could be obtained by the addition of the third satellite navigation system in addition to GPS-GLONASS. In this study, the current status of the integrated navigation performance for various satellite constellation combinations was analyzed based on 2014, and the navigation performance in 2020 was predicted based on the FOC plan of the satellite navigation system for each country. For this prediction, the orbital elements and nominal almanac data of satellite navigation systems that can be observed in the Korean Peninsula were organized, and the minimum elevation angle expecting signal shielding was established based on Matlab and the performance was predicted in terms of DOP. In the case of integrated navigation, a time offset determination algorithm needs to be considered in order to estimate the clock error between navigation systems, and it was analyzed using two kinds of methods: a satellite navigation message based estimation method and a receiver based method where a user directly performs estimation. This simulation is expected to be used as an index for the establishment of the minimum satellite constellation for obtaining the best navigation performance.

• 한국의류학회지
• /
• 제27권7호
• /
• pp.843-850
• /
• 2003

Cu/PET film composites were prepared by electroless copper plating method. In order to improve adhesion between electroless plated Cu layer and polyester (PET) film, the effect of pretreatment conditions such as etching method, mixed catalyst composition were investigated. Chemical etching and plasma treatment increased surface roughness in decreasing order of Ar＞HCl＞O$_2$＞NH$_3$. However, adhesion of Cu layer on PET film increased in the following order: $O_2$＜Ar＜HCl＜NH$_3$. It indicated that appropriate surface roughness and introduction of affinitive functional group with Pd were key factors of improving adhesion of Cu layer. PET film was more finely etched by HCI tolution, resulting in an improvement in adhesion between Cu layer and PET film. Plasma treatment with NH$_3$produced nitrogen atoms on PET film, which enhances chemisorption of Pd$^{2+}$ on PET film, resulting in improved adhesion and shielding effectiveness of Cu layer deposited on the Pd catalyzed surface. Surface morphology of Cu plated PET film revealed that Pd/Sn colloidal particles became more evenly distributed in the smaller size by increasing the molar ratio of PdCl$_2$; SnCl$_2$from 1 : 4 to 1 : 16. With increasing the molar ratio of mixed catalyst, adhesion and shielding effectiveness of Cu plated PET film were increased.d.

• 한국전자파학회논문지
• /
• 제25권11호
• /
• pp.1197-1200
• /
• 2014

HEMP 방호시설의 전자파 차폐 성능을 평가하는데 사용하고자 하는 두 시험 규격, IEEE Std. 299 및 MIL-STD-188-125-1은 동일한 방호시설임에도 불구하고, 각기 다른 시험 결과를 제공한다. 특히, 10 kHz~20 MHz 대역의 저주파 자기장 영역에서는 IEEE Std. 299 규격에 의한 시험 결과가 MIL-STD-188-125-1 규격에 비해 20~30 dB 정도 더 낮게 평가됨을 확인하였다. 이러한 결과는 두 규격에서 규정하고 있는 측정 조건이 상이함에 기인하며, 따라서 측정거리의 단축을 위해 IEEE Std. 299 규격을 적용할 경우에는 기존의 MIL-STD-188-125-1 규격에 근거하여 작성된 전자파 차폐 성능 요구는 재조정되어야 한다.

• 대한한의진단학회지
• /
• 제17권3호
• /
• pp.225-232
• /
• 2013

Objectives The aim of this study is to design a part in contact with the face of computerized tongue diagnosis system (CTDS), so that external light is effectively shielded even if the facial appearance and degree of protrusion differ when a patient opens or closes his/her jaws. Methods Each of the 4 researchers manually produced clay models of the part in contact with the face of CTDS. Shielding and contact feeling of the clay models were evaluated by 20 assessors. Based on the evaluation, we selected the appropriate model and produced the final silicon model. Then we evaluated the performance of the shielding of the completed silicon model. We took tongue pictures of 60 participants with a CTDS applying the silicon model in condition with external light and without it. The color values in RGB color model and gray scale of the tongue pictures in condition with external light were compared with those without external light. Results There was no significant difference between the color values of the picture taken in condition with external light and those without external light. Conclusions We concluded that the produced part in contact with the face of CTDS can effectively block out the external light.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.387-392
• /
• 2018

Various technical approaches and concepts have been proposed to develop conductive super-hydrophobic (SH) surfaces. However, most of these approaches are not usable in practical applications because of insufficient adhesion and cost issues. Additionally, durability and uniformity issues are still in need of improvement. The goal of this research is to produce a large-area conductive SH surface with improved adhesion performance and uniformity. To this end, carbon nanotubes (CNT) with a high aspect ratio and elastomeric polymer were utilized as a conductive filler and matrix, respectively, to form a coating layer. Additionally, nanoscale silica particles were utilized for stable implementation of the conductive SH surface. To improve the adhesion properties between the SH coating layer and substrate, pretreatment of the substrate was conducted by utilizing both wet and dry etching processes to create specific organic functional groups on the substrate. Following pretreatment of the surface, a zirco-aluminate coupling agent was utilized to enhance adhesion properties between the substrate and the SH coating layer. Raman spectroscopy revealed that adhesion was greatly improved by the formation of a chemical bond between the substrate and the SH coating layer at an optimal coupling agent concentration. The developed conductive SH coating attained a high electromagnetic interference (EMI) shielding effectiveness, which is advantageous in self-cleaning EMI shielding applications.

• 한국기계가공학회지
• /
• 제19권10호
• /
• pp.59-67
• /
• 2020

Polycarbonate thermoplastic composite materials are anisotropic and exhibit physical properties in the longitudinal direction. Therefore, the physical properties depend on the type and direction of reinforcements. The thermal conductivity, electrical conductivity, and resin impregnation can be controlled by adding carbon nanotubes to polycarbonate resin. However, the carbon fiber used as a reinforcing material is expensive, interfacial adhesion issues occur, and simulation values are different from actual values, making it difficult to perform mathematical analysis. However, carbon nanotubes have advantages such as light weight, rigidity, impact resistance, and reduced number of parts compared to metals. Due to these advantages, it has been applied to various products to reduce weight, improve corrosion resistance, and increase impact durability. As the content of carbon nanotubes or carbon fibers increases, the mechanical properties and antistatic and electromagnetic shielding performance improve. It is expected that the amount of carbon nanotubes or carbon fibers can be optimized and applied to various industrial products.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.695-698
• /
• 2003

This paper presents a Si power LDMOSFET for power amplifiers in the 1.8-2.2GHz frequency range for the base station of personal communication systems. To improve the cut-off frequency, the proposed Si power LDMOSFET has small gate to drain capacitance by shielding the electric fields with extended source electrode and forming the field oxide structure in drain region. The proposed Si power LDMOSFET can be used for a power amplifier and it has 32% of power added efficiency and 39.5dBm of output power when the supply voltage is 28V and the operating frequency is 1.9GHz.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권4호
• /
• pp.238-247
• /
• 2004

This paper describes the insulation coordination scheme of line in distribution system when the direct lightning surge strikes. The BIL that is applied to distribution system is not properly considered the performance and operation of arresters. Because of that, the high BIL is being used at partial system. This paper variously analyses the lightning overvoltage of line and equipment with earth of overhead grounding wire and installation types of arrester. From these result. authors examine the rationality of BIL.