• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.137-141
• /
• 2004

Many monopropellant thrusters use a catalyst for decompose the propellant, hydrazine. The catalyst directly affects the thruster performances and lifetime. Therefore, it is important to confirm that the catalyst is suitable for our thrusters. Until 2002, we used She1l405 catalyst, for satellite RCS thrusters, and H-IIA and M-V launch vehicle upper-stage RCS thrusters. In 2002, however, Shell Chemical Inc. ceased manufacturing She1l405 catalyst and transferred the product to AEROJET, where it was renamed S405. We subsequently investigated the characteristics of AEROJET's S405 catalyst and SOLVAY's KC12GA catalyst, (SOLVAY is a Belgian chemical company, and KC12GA is used for ASTRIUM's thruster) and conducted thruster firing tests using the new catalysts. After conducting, we confirm that the KC12GA catalyst was suitable for our thrusters, and decided to use KC12GA for two satellite programs.

• Structural Engineering and Mechanics
• /
• 제88권5호
• /
• pp.405-417
• /
• 2023

This paper reveals theoretical research to the nonlinear dynamic response and initial geometric imperfections sensitivity of the spinning graphene platelets reinforced metal foams (GPLRMF) cylindrical shell under different boundary conditions in thermal environment. For the theoretical research, with the framework of von-Karman geometric nonlinearity, the GPLRMF cylindrical shell model which involves Coriolis acceleration and centrifugal acceleration caused by spinning motion is assumed to undergo large deformations. The coupled governing equations of motion are deduced using Euler-Lagrange principle and then solved by a combination of Galerkin's technique and modified Lindstedt Poincare (MLP) model. Furthermore, the impacts of a set of parameters including spinning velocity, initial geometric imperfections, temperature variation, weight fraction of GPLs, GPLs distribution pattern, porosity distribution pattern, porosity coefficient and external excitation amplitude on the nonlinear harmonic resonances of the spinning GPLRMF cylindrical shells are presented.

• Structural Engineering and Mechanics
• /
• 제20권4호
• /
• pp.405-420
• /
• 2005

In this paper, a hybrid/mixed nonlinear shell element is developed in polar coordinate system based on Hellinger/Reissner variational principle and the large-deflection theory of plate. A numerical solution scheme is formulated using the hybrid/mixed finite element method (HMFEM), in which the nodal values of bending moments and the deflection are the unknown discrete parameters. Stability of the present element is studied. The large-deflection analyses are performed for simple supported and clamped circular plates under uniformly distributed and concentrated loads using HMFEM and the traditional displacement finite element method. A parametric study is also conducted in the research. The accuracy of the shell element is investigated using numerical computations. Comparisons of numerical solutions are made with theoretical results, finite element analysis and the available numerical results. Excellent agreements are shown.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.405-411
• /
• 1998

An iterative numerical computational algorithm is presented to design a plate of shell element subjected to membrane and flexural forces. Based on equilibrium consideration, equations for capacities of top and bottom reinforcements in two orthogonal directions have been derived. The amount of reinforcement is determined locally, i. e., for each sampling point, from the equilibrium between applied and internal forces. One case of design is performed for a hyperbolic paraboloid saddle shell (originally used by Lin and Scordelis) to check the design strength against a consistent design load, therefore, to verify the adequacy of design practice for reinforced concrete shells. Based on nonlinear analyses performed, the analytically calculated ultimate load exceeded the design ultimate load from 14-43% for an analysis with relatively low to high tension stiffening, ${\gamma}$ =5~20 cases. For these cases, the design method gives a lower bound on the ultimate load with respect to Lower bound theorem. This shows the adequacy of the current practice at least for this saddle shell case studied. To generalize the conclusion many more designs-analyses are performed with different shell configurations.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.402-405
• /
• 2005

Such press-forming process are the used machine ability and the characteristic, used material, tile accuracy of the part, condition of a process are considered the designed. In order to estimate in automotive sheet forming processes used AutoForm software. A through in simulation result comparison with experimentation result, it was possible to know that much the same estimated spring-back through a forming analysis. By making apply this to an industrial site the productivity improvement and cost reduction etc. effect able was predicted.

• Nuclear Engineering and Technology
• /
• 제29권5호
• /
• pp.399-405
• /
• 1997

In this study a new phase separated spectral analysis algorithm is proposed to identify CSB vibration mode directly from ex-core neutron signals. Ex-core neutron signals can be decomposed into the global, core support barrel (CSB) beam mode, and CSB shell mode components by the new phase separation algorithm based on the characteristics of Fourier transform. By using the proposed algorithm and the conventional spectral analysis the vibration mode of the CSB and the fuel assembly of Ulchin-1 NPP were identified from measured ex-core neutron signals.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.398-405
• /
• 1997

The finite element program is presented for the analysis of the moment distribution in continuous slabs of simply supported girders. The program includes the material nonlinearity of the continuous and steel reinforcements of the RC slabs, but assumes that the PC beam and cross beam behave linearly. In modeling the PC slabs and girders, the four node degenerated shell element formulated based on the assumed strain interpolation and the 3D beam element are used, respectively. Using the program, the influence of the existence of the cross bean, the filling of open joints on the continuous at supports, and perfect continuation of precast girder elements are examined.

• Asian-Australasian Journal of Animal Sciences
• /
• 제4권4호
• /
• pp.399-405
• /
• 1991

The interaction of 4 dietary crude protein (13, 16, 19 or 22%) and 4 metabolizable energy (2600, 2800, 3000 or 3100 kcal ME/kg) levels on egg quality performances of Starcross layers were assessed between 245 and 275 days of age. The egg weight increased significantly with the increasing dietary protein and energy levels. But egg shape index, albumen index, yolk index, yolk dry matter, yolk protein, yolk fat, albumen protein and shell tickness were similar at all dietary protein and/or energy levels. The egg specific gravity and albumen weight increased but the yolk, weight, Haugh unit and albumen drymatter decreased with the increase of dietary protein levels and showed irregular trend with energy levels. The albumen dry matter and egg shell weight, however, were not affected by energy and protein levels. Simultaneous increase of protein and energy increased specific gravity, albumen index and shell thickness at a greater rate than that increased by the increase of protein or energy alone.

• 공업화학
• /
• 제34권1호
• /
• pp.36-44
• /
• 2023

코어-쉘 TiO₂/Ag 나노입자를 수정된 졸-겔 공정과 함께 acetoxime을 환원제로 사용한 물/dodecylbenzenesulfonic acid (DDBA)/cyclohexane의 역 미셀 방법으로 합성하였다. 합성된 TiO₂/Ag 나노입자의 구조, 형태 및 크기를 XRD, UV-visible spectroscopy, SEM, TEM 및 TGA를 이용하여 조사하였다. TiO₂/Ag 나노입자의 크기는 [물]/[DDBA]의 몰비를 조절하여 제어할 수 있었다. TiO₂/Ag 나노입자의 크기와 다분산성은 [물]/[DDBA]의 몰비가 증가함에 따라 증가하였다. 아나타제 결정상의 TiO₂ 나노입자 위에 생성된 Ag 나노입자는 430 nm 주변에서 강한 표면 플라즈몬 공명(SPR) 흡수 특성을 나타내었다. SPR 피크는 나노입자 크기의 증가에 따라 장파장으로의 적색 이동이 나타났다. 70 wt% 조성으로 TiO₂/Ag 나노입자를 분산시켜 전도성 페이스트를 제조하고, 스크린 인쇄법으로 PET 필름에 코팅하여 전도성을 조사하였다. TiO₂/Ag 나노입자 페이스트로 코팅된 필름은 상용 Ag 페이스트의 경우보다 높은 405~630 μΩ/sq 영역의 표면저항을 나타내었다.

• 한국분말재료학회지
• /
• 제20권6호
• /
• pp.405-410
• /
• 2013

During sintering of Ni-electrode multi-layer ceramic capacitors (MLCCs), the Ni electrode often becomes discontinuous because of its lower sintering temperature relative to that of $BaTiO_3$. In an attempt to retard the sintering of Ni, we introduced passivation of the Ni powder. To find the optimal passivation conditions, a thermogravimetric analysis (TGA) was conducted in air. After passivation at $250^{\circ}C$ for 11 h in air, a nickel oxide shell with a thickness of 4-5 nm was formed on nickel nanoparticles of 180 nm size. As anticipated, densification of the compacts of the passivated Ni/NiO core-shell powder was retarded: the starting temperature of densification increased from ${\sim}400^{\circ}C$ to ${\sim}600^{\circ}C$ in a $97N_2-3H_2$ (vol %) atmosphere. Grain growth was also retarded during sintering at temperatures of 750 and $1000^{\circ}C$. When the sintering atmosphere was changed from wet $99.93N_2-0.07H_2$ to wet $99.98N_2-0.02H_2$, the average grain size decreased at the same sintering temperature. The conductivity of the passivated powder sample sintered at $1150^{\circ}C$ for 8 h in wet $99.93N_2-0.07H_2$ was measured to be $3.9{\times}10^4S/cm$, which is comparable with that, $4.6{\times}10^4S/cm$, of the Ni powder compact without passivation. These results demonstrate that passivation of Ni is a viable means of retarding sintering of a Ni electrode and hence improving its continuity in the fabrication of $BaTiO_3$-based multi-layer ceramic capacitors.