• The Research Journal of the Costume Culture
• /
• v.16 no.5
• /
• pp.852-862
• /
• 2008

The purpose of this paper is to find how to do the width of skirt and the girth of the waist in the adequate pattern making for the obese women's skirt. Appearance test of the five experimental skirts was evaluated by the four experts in clothing construction. At the same time, 3D clothing air volume was observed for the five types of experimental skirt with different size specifications. The results from the appearance test were as follows; when the width of skirt pattern is set for(the shell girth/2), it was suggested w/4+1(front), w/4(back) for girth of the waist. On one hand, in case of (the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front)/2 and(waist girth of back)/2 for obese women's skirt with the best appearance. As results, it was found that the width of skirt pattern for the obese women should be the greatest shell girth instead of hip girth. In the case of the hip girth, the amount of ease on hip was suggested 6cm. It was found that pattern with the wrinkle of ease was full of the gaps between body and skirt in 3D clothing air volume. In spreading out to 2D flat pattern from 3D scan data, when the width of skirt pattern was set for(the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front/2)+(the waist girth of back/2) than the shell girth/2 in girth of the waist for the best appearance. And the conversion of 3D scan data into 2D flat pattern in curve shape of crosswise had to spread out of the plane in straight line. The obese women's clothing should be manufactured with systematical consideration of the diversity and scarcity of the obese women's body shape.

• Korean Journal of Human Ecology
• /
• v.18 no.2
• /
• pp.397-406
• /
• 2009

A Study on the Development of Brassiere Pattern for Elderly Women The purpose of this study is to develop functional and sensible brassiere for elderly women. For this purpose, 6 elderly women(aged between 65 and 69) were sampled to be measured for their body sizes and tested for their bressiere wearing. he results were as follows; 1. In order to develop the basic patterns of elderly women's bressieres, 90B size was selected and then, their bressiere fitting was tested. The foundation pattern of the size 90A was proved for the body by the wearing tests. Each angle and length of the parts on the basic line of the breasts played an important role on setting the pattern. 2. As based on the body surface shell extracted from a plastic mold(photo.2), the cup of brassiere pattern were applied to the body surface shell(photo.4), and full side stretch-wings were applied to 13% reduced body size. The design pattern of elderly women's brassiers were characterized by a round wired as well as a full cup(3piece) embracing the entire breasts. 3. As the result of the wearing test, the excellence of the experimental brassiere was recognized objectively, with high marks in all the items(fig. 6). The experimental brassiere was covering the whole breasts to cope with change according to breasts loosing. It was designed to support the breasts firmly.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1177-1182
• /
• 2002

Highly surfaced and porous hydroxyapatite body was artificially formed on the surface of a shell through a reaction with phosphatic solutions. As a result of qualitative observation, hydroxyapatite seemed to be crystallized by solution-precipitation process accelerated by the nucleation surface of a shell. The process of formation of hydroxyapatite layer was as follows. 1. Dense nucleation and growth on the surface of solid phase 2. Formation of microporous layer by contact and entanglement between crystallines 3. diffusion of solution through the porous layer and thickness growth of layer towards inside

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.43-47
• /
• 2003

This paper presents the optimum design of cylindrical shell under external pressure loading. Two kinds of material, AI7075-T6, Ti-6AI-4V, are considered. For each material, the design variable is a thickness of the unstiffened parallel middle body shell, and the state variable, constraint, is hoop stress and the object function is total weight of the cylindrical shell. Optimization is performed by conventional FE Program, ANSYS. In addition, buckling analysis is performed for the middle body of the cylindrical shell. Finally, we calculates the payload of the cylindrical shell to keep neutral buoyancy with optimized thickness in deep-sea applications.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.6
• /
• pp.738-744
• /
• 2017

Effect of dietary inclusion of microalgae, diatom-dominant, oil extracts (MOE) on growth, body composition and shell color of juvenile abalone Haliotis discus was investigated. One thousand four hundred and seventy juvenile abalone were distributed into 21 plastic rectangular containers. Seven experimental diets were prepared: MOE0, MOE0.01, MOE0.05, MOE0.1, MOE0.5, MOE1 and MOE2 diets containing MOE at the concentrations of 0, 0.01, 0.05, 0.1, 0.5, 1 and 2% at the expense of mixture of squid liver and soybean oils, respectively. The experimental diets were fed to abalone in triplicate once a day with a little leftover for 16 weeks. Weight gain and specific growth rate of abalone fed the MOE1 and MOE2 diets were higher than those of abalone fed the all other diets. The shell length and soft body weight of abalone fed the MOE2 diet were longer and heavier than those of abalone fed the all other diets. Crude protein and ash content of the soft body of abalone were affected by dietary inclusion of MOE. The shell color of abalone fed the all experimental diets was different from that of wild abalone. In conclusion, dietary inclusion of MOE improved growth of abalone, but did not shell color of abalone.

• Journal of Fashion Business
• /
• v.21 no.4
• /
• pp.116-126
• /
• 2017

This study applied a segmented hard shell design on knee protectors for children with the objective of increasing mobility. The prototype of the hard shell that does not correspond to movement of the body among components of the knee protector was developed. Surface modeling was conducted based on 3D knee data to enhance comfort through optimized fit on the knee joint where the hard shell would be worn. For this, previous studies on changes in skin near the knee joint during knee flexion were reviewed to establish basic segmental lines. The basic design included six segments, and the number of segments was used as the design variable by increasing or decreasing it to 0, 3, 6, 9, and 14 segments. A prototype was produced from 3D printing with TPU material, worn for wearing assessment. Results revealed fewer numbers of segments resulting in less fit with the body, while actual appearance was stable. Meanwhile, the number of proper segments improved better fit with the body during movement. The wearing assessment revealed the amount of gap reflects change in skin length depending on movement. Assessment results demonstrated basic segment design, S6 with 6 segments, had the best design and most optimized fit. Findings in this study can provide key data for designing knee protection products for children.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.1 s.178
• /
• pp.152-158
• /
• 2006

The AutoForm previously used the membrane element and it accomplished sheet metal forming analysis. The membrane analysis has been widely applied to various sheet metal forming processes because of its time effectiveness. However, it is well-known that the membrane analysis can not provide correct information for the processes which have considerable bending effects. In this research experimental results were compared with the analysis results obtained by using the shell element which is applied newly in the AutoForm commercial software. The shell element is a compromise element between continuum element and membrane element. The Finite element method by using shell element is the most efficient numerical method. From this research, it is known that FEA by using shell element can predict accurately the problems happened in actual experimental auto-body panel.

• The Journal of Korea Robotics Society
• /
• v.17 no.1
• /
• pp.68-75
• /
• 2022

In this paper, we considered the deformation shape of the soft rotation actuator as a double curvature shell and proceeded with the analytical development. Since the response of the hyperelastic material has a large nonlinear deformation, the analytical approach is very complicated and the solution cannot be easily obtained. it is assumed that the behavior of the flexible body, which is a superelastic material, takes the form of a double curvature shell, and the formulas for calculating the deformation are simplified. In this process, equilibrium equations in the related coordinate system representing a double curvature shell were derived. In addition, assuming a thin shell, the stress component in the thickness direction was ignored, and the equation was developed by adding the assumption of free rotation without load. In order to verify the analytically calculated value in this way, an experiment was conducted and the results were compared.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.17-26
• /
• 2007

In this paper, a theoretical approach is studied to predict structural performances and weight reduction rates of a car-body with shell type sections in case that its materials have to be substituted. For the material substitution design of a car-body, bending, axial and twisting deformations are considered under constant stiffness and strength conditions, which utilize some new indices derived from a structural performance point of view. The developed indices to measure the weight reduction by the material substitution give good guidelines on conceptual design of car-bodies.

• Korean Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.117-125
• /
• 2000

The purpose of this study is the fundamental study to develope basic slacks pattern for pregnant women by analysing characteristics of the lower half of their body. The results are as followers: 1. The pregnancy has changed almost all items including the waist height, lengths and etc. and changed proportion of body by accumulation of fat. 2. The changes of the waist circumference and flat figure from waist to hip could be found by analysing the body shell (pregnant women from five months pregnance to one month after delivery). 3. The postures of five month-pregnant women were compared with those of six, seven, eight, and nine month-pregnant women, and with those of one month after delivery. The waist height has been increased till the middle of pregnancy but lowed till the end of the pregnancy.