Browse > Article

Finite Element Analysis of Sheet Metal Forming Process Using Shell Element  

Jung Dong-Won (제주대학교 기계에너지시스템공학부)
Ko Hyung-Hoon (제주대학교 기계공학과 대학원)
Lee Chan-Ho ((주)오토폼엔지니어링코리아)
You Ho-Young (울산과학대 기계공학부)
Publication Information
Journal of the Korean Society for Precision Engineering / v.23, no.1, 2006 , pp. 152-158 More about this Journal
Abstract
The AutoForm previously used the membrane element and it accomplished sheet metal forming analysis. The membrane analysis has been widely applied to various sheet metal forming processes because of its time effectiveness. However, it is well-known that the membrane analysis can not provide correct information for the processes which have considerable bending effects. In this research experimental results were compared with the analysis results obtained by using the shell element which is applied newly in the AutoForm commercial software. The shell element is a compromise element between continuum element and membrane element. The Finite element method by using shell element is the most efficient numerical method. From this research, it is known that FEA by using shell element can predict accurately the problems happened in actual experimental auto-body panel.
Keywords
Sheet metal forming; AutoForm; Shell element; Membrane element; Bending effects;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Bathe, K .J., 'finite element procedures in engineering analysis,' Prentice-Hall, 1982
2 Hughes, T. J. R., 'the finite element method: linear static and dynamic finite element analysis,' Prentice-Hall, 1987
3 Yoon, J. W., Yang, D. Y. and Chung, K., 'A elastoplastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials,' Comput. Meths. Appl. Mech. Engrg, Vol. 1, pp. 23-56, 1999   DOI   ScienceOn
4 Kim, J. B., Kim, T. r., Yang, D. Y. and Yoo, D. J., 'An efficient analysis of wrinkling in the door inner stamping process by global analysis and subsequent local analysis,' Transactions of Materials Processing, Vol. 9, No.6, pp. 653-662, 2000   과학기술학회마을
5 Mattiaso, K., 'Numerical Sim ulation of Stretching Processes,' SIMOP-I, Editor Lange. K, Proc, of the l. Int. Workshop, Stuttgart, pp. 170-213, 1985
6 Wang, N. M., Tang, S. C., 'analysis of bending effects in sheet forming operations,' Int. J. for Num. Mech. in Engng, Vol. 25, pp. 253-367, 1988   DOI
7 Stanley, G., 'continuum-based shell elements,' Ph.D Thesis, Stanford University, 1985
8 Yang, K. B., 'rigid-plastic finite elemet analysis of sheet metal forming processes using membrane, shell and continuum elements,' department of mechanical engineering graduate school cheju national university, june, 2000
9 Yang, D. Y., Jung, D. W., Song, I. S., Yoo, D. J. and Lee, J. H., 'comparative investigation into implicit, explicit and iterative implicit/explicit, schemes for the simulation of sheet-metal forming process,' J. Materials Processing Technology, Vol. 50, pp. 39-53, 1995   DOI   ScienceOn
10 Shim, H. B., Yang, D. Y., 'an elastic-plastic finite element analys is on hydrostatic bulging of rectangular diaphragms by using layered degenerated shell element,' Int. J. Mech. SDI, Vol. 32, pp. 49-64, 1990   DOI   ScienceOn
11 Jung, D. W., Yoo, D. J. and Yang, D. Y., 'a dynamic explicit/rigid-plastic finite element formulation and its application to sheet metal forming processes,' Engineering Computations, Vol. 12, pp. 707-722, 1995   DOI
12 Jung, D. W., Hwang, J. S. and Ahn, H. G., 'a first study of developing stamping die of REF SILL OTR-R/L auto-body panel stamping processes,' Reprinted from Bulletin of the Marine and Environmental Research Institute Cheju National University Jeju, Korea., Vol. 28, No. 1, 2004
13 Jung, D. W., Ahn, H. G., 'study of analyzing roof panel using static implicit finite element method,' Korea society of precision engineering, Vol. 22, pp. 78-85, 2005   과학기술학회마을