• 대한의용생체공학회:의공학회지
• /
• 제17권2호
• /
• pp.255-262
• /
• 1996

Antithrombogenic surFace is one of the most important things to the artificial vascular prostheses. This problem will be solved if the surface of prosthesis is covered with endothelial cells. The attachment and the growth of endothelial cells onto vascular prosthesis are very difficult. So many studies have been concentrated on the attachement of endothelial cell. But no good performance of the in uiwo experiments has been shown until now. In this study, we used the whole extracellular matrix (ECM) excreted from fibroblasts as an underlying matrix, and the endothelial cells were seeded to obtain the long term patency of vascular graft(i.e., for the patent 8 week implanted wafts in the animal model of rat). In order to study the antithrombogenic functions of cultured endothelial cells, prostaglandin(PGF 1 a) synthesis and platelet adhesion were assayed. The concentration of PGF a of stimulated group was sisnificantly higher than that of control group(21.97 $\pm$ 3.45 vs 4.93 $\pm$0.71 pg/1000 cells). The platelet adhesion of the polyurethane sheet covered with endothelial cells was lower than that of polyurethane sheet or sheet covered with ECM(1.04$\pm$0.28, 2.87$\pm$0.77, 2.89$\pm$0.70, % radioactivities, respectively). Endothelial cells grew well on polyurethane coated with ECM, synthesized the prostacyclin and functioned well as antithrombogenic. Therefore the endothelialization onto the ECM excreted from fibroblasts may be a good method for the vfudig prosthesis.

• 소성∙가공
• /
• 제14권6호
• /
• pp.520-526
• /
• 2005

In recent years, there has been a growth of the manufacture and application of magnesium products because of its small specific gravity as well as its relatively high strength. However, there are so many studies to assure good formability because magnesium sheet alloy is difficult to form. In this study, uniaxial tensile and biaxial tensile tests of AZ31 magnesium sheet alloy with thickness of 1.2mm were performed at room temperature. Uniaxial tensile tests were performed until $7{\%}$ of engineering strain. Lankford values and stress-strain curve were obtained. Biaxial tensile tests with cruciform specimen were performed until the breakdown of the specimen occurs. The yield loci were calculated by application of plastic work theory. The results are compared with the theoretical predictions based on the Hill and Logan-Hosford model. In this study, Hill's 1979 yield function for the case of m=2.8 and Logan-Hosford yield function for the case of M=8 give good agreements with experimental results. However, next study will be performed at warm-temperature because the specimens are broken under the $0.5{\%}$ of equivalent strain at biaxial tensile test.

• 한국세라믹학회지
• /
• 제41권4호
• /
• pp.277-283
• /
• 2004

Plasma Display Panel(PDP) 상판용 투명유전체의 green sheet를 제조코자 투명유전체 슬러리의 분산특성 및 유기물의 함량과 조성비에 따른 밀도와 기계적 특성을 연구하였다. 비수계 시스템에서 슬러리의 완전분산을 위한 분산제의 종류와 분산제의 양을 결정하기 위해 침강실험, 점도측정을 행하여 최적의 분산조건을 구하였다. 조성물 변수로서 투명유전체조성 분말/(투명유전체조성 분말＋유기물)의 비와 결합제/(결합제＋가소제)의 비를 각각 변화시켜 green sheet를 제조하였다. 제조된 tape casting 슬러리의 대부분은 의가소성(pseudoplastic) 거동을 보이는데, 의가소성 거동은 shear thinning의 효과를 가지는 것으로 기술 할 수 있다. 각각의 조성을 가지는 슬러리는 모두 전단속도가 증가함에 겉보기 점도가 감소하는 shear thinning 효과를 보여 주었다. Green sheet의 특성을 조사한 결과 유기물의 함량 및 조성이 green sheet의 밀도와 기계적 특성을 결정하는 중요한 인자가 되었다.

• 소성∙가공
• /
• 제7권3호
• /
• pp.233-245
• /
• 1998

A new approach has been proposed for the incremental analysis of the nonsteady state large deformation of planar anisotropic elastic-plastic sheet forming. A mathematical brief review of a constitutive law for the incremental deformation theory has been presented from flow theory using the minimum plastic work path for elastic-plastic material. Since the material embedded coordinate system(Lagrangian quantity) is used in the proposed theory the stress integration procedure is completely objective. A new return mapping algorithm has been also developed from the general midpoint rule so as to achieve numerically large strain increment by successive control of yield function residuals. Some numerical tests for the return mapping algorithm were performed using Barlat's six component anisotropic stress potential. Performance of the proposed algorithm was shown to be good and stable for a large strain increment, For planar anisotropic sheet forming updating algorithm of planar anisotropic axes has been newly proposed. In order to show the effectiveness and validity of the present formulation earing simulation for a cylindrical cup drawing and front fender stamping analysis are performed. From the results it has been shown that the present formulation can provide a good basis for analysis for analysis of elastic-plastic sheet metal forming processes.

• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.2113-2122
• /
• 1994

The 3-D FEM analysis for simulating the stamping operation of planar anisotropic sheet metals with arbitrarily-shaped tools is introduced. An implicit, incremental, updated Lagrangian formulation with a rigid-viscoplastic constitutive equation is employed. Contact and friction are considered through the mesh-normal, which compatibly describes arbitrary tool surfaces and FEM meshes without depending on the explicit spatial derivatives of tool surfaces. The consistent full set of governing relations, comprising equilibrium equation and mesh-normal geometric constraints, is appropriately linearized. The linear triangular elements are used for depicting the formed sheet, based on membrane approximation. Barlat's non-quadratic anisotropic yield criterion(strain-rate potential) is employed, whose in-plane anisotropic properties are taken into account with anisotropic coefficients and non-quadratic function parameter. The planar anisotropic finite element formulation is tested with the numerical simulations of the stamping of an automotive hood inner panel and the drawing of a hemispherical punch. The in-plane anisotropic effects on the formability of both mild steel and aluminum alloy sheet metals are examined.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.158-163
• /
• 2009

Titanium alloy sheets have excellent specific strength and corrosion resistance as well as good performance at high temperature. Recently, titanium alloys are widely employed not only aerospace parts but also bio prothesis and motorcycle. However, due to the low formability and large spring back at room temperature, titanium alloy sheets were usually formed by slow forming or hot forming with heating die and specimen. In the sheet metal forming area, FE simulation technique to optimize forming process is widely used. To achieve high accuracy FE simulation results, Identification of material properties and deformation characteristic such as yield function are very important. In this study, uniaxial tensile and biaxial tensile test of Ti-6Al-4V alloy sheet with thickness of 1.0mm were performed at elevated temperature of 873k. Biaxial tensile tests with cruciform specimen were performed until the specimen was breakdown to characterize the yield locus of Ti-6Al-4V alloy sheet. The experimental results for yield locus are compared with the theoretical predictions based on Von Mises, Hill, Logan-Hosford, and Balat's model. Among these Logan-Hosford's yield criterion well predicts the experimental results.

• 대한기계학회논문집
• /
• 제7권1호
• /
• pp.64-72
• /
• 1983

A method of numerical analysis is proposed for the pure stretch forming of A1 sheet by hemi-spherical punch. The analysis is performed by Woo's general method under the condition of variable friction and plastic yielding is based on the new anisotropic yield function proposed by Hill. A comparison of the calculated results with experiment shows good agreement for various lubrication when the initial values of the coefficient of coulomb friction at pole are less than 0.4.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.13-16
• /
• 2000

In this paper the authors proposed a new anisotropic yield criterion for porous ductile materials. By using the proposed yield criterion and its flow rules a damage evolution of anisotropic sheet under biaxial tensile loading is investigated. A comparison of yield locus and damage evolution between the proposed yield criterion and experiments are carried out. the results are in good agreement.

• Journal of Welding and Joining
• /
• 제24권5호
• /
• pp.67-73
• /
• 2006

Laser welding is suitable for welding to the aluminum alloy sheet. In order to apply the aluminum laser welding to production line, parameters should be optimized. In this study, the optimal welding condition was searched through the genetic algorithm in laser welding of AA5182 sheet with AA5356 filler wire. Second-order polynomial regression model to estimate the tensile strength model was developed using the laser power, welding speed and wire feed rate. Fitness function for showing the performance index was defined using the tensile strength, wire feed rate and welding speed which represent the weldability, product cost and productivity, respectively. The genetic algorithm searched the optimal welding condition that the wire feed rate was 2.7 m/min, the laser power was 4 kW and the welding speed was 7.95 m/min. At this welding condition, fitness function value was 137.1 and the estimated tensile strength was 282.2 $N/mm^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1225-1228
• /
• 2005

Barrier ribs in the plasma display panel(PDP) function to maintain the discharge space between the glass plates as well as to prevent optical crosstalk. Patterning of barrier ribs is one of unique processes for making PDP. In this work photosensitive barrier rib pastes were prepared by incorporating binder polymer, solvent, functional monomers photoinitiator, and barrier rib powder of which surface was treated with fumed silica particles. Study on the function of materials for the barrier rib paste were undertaken. After optimization of paste formulation and photolithographic process, it was found that photolithographic patterning of barrier ribs with photosensitive barrier rib green sheet could be used in the fabrication of high resolution PDP.