The current study investigates the electroplating characteristics of Sn-Cu eutectic micro-bumps electroplated on a Si chip for flip chip application. Under bump metallization (UBM) layers consisting of Cr, Cu, Ni and Au sequentially from bottom to top with the aim of achieving Sn-Cu bumps $10\times10\times6$${\mu}m$ in size, with 20${\mu}m$ pitch. In order to determine optimal plating parameters, the polarization curve, current density and plating time were analyzed. Experimental results showed the equilibrium potential from the Sn-Cu polarization curve is -0.465 V, which is attained when Sn-Cu electro-deposition occurred. The thickness of the electroplated bumps increased with rising current density and plating time up to 20 mA/$cm^2$ and 30 min respectively. The near eutectic composition of the Sn-0.72wt%Cu bump was obtained by plating at 10 mA/$cm^2$ for 20 min, and the bump size at these conditions was $10\times10\times6$${\mu}m$. The shear strength of the eutectic Sn-Cu bump was 9.0 gf when the shearing tip height was 50% of the bump height.
본 연구에서는 낙동강 유역에 분포하는 모래와 실트를 대상으로 실트 함유량에 따른 모래의 비배수 반복전단강도 특성을 파악하기 위하여 이방압밀비($K_c$=1.0, 1.5, 2.0)를 달리하여 일련의 비배수 반복삼축시험을 실시하였다. 시험결과 모든 $K_c$에서 실트 함유량이 증가함에 따라 반복전단응력비(CSR)가 감소하였으며, $K_c$가 증가할수록 실트 함유량 증가에 의한 CSR의 감소가 더 크게 나타났다. 전단시 발생되는 과잉간극수압은 $K_c$에 관계없이 실트 함유량 증가에 따라 초기 과잉간극수압이 크게 발생되어 CSR의 감소에 영향을 미쳤으며, 또한 압밀 후 시료의 skeleton 간극비를 산정하여 분석한 결과 실트 함유량 증가에 비례하여 전반적으로 skeleton 간극비가 크게 증가하여 초기 과잉간극수압의 증가와 더블어 CSR 감소의 주요원인으로 파악되었다.
지반에 대한 정확한 이해를 위해 비교란 시료의 채취를 통한 실내실험이 필수적이며, 사질토 지반의 비교란 시료 채취는 인공동결공법에 의한 방법이 가장 효과적인 것으로 알려져 있다. 본 연구의 목적은 유사한 상대밀도를 가지는 동결-융해시료와 비동결시료의 비배수 삼축압축실험을 이용한 강도평가와 실험과정에서 측정한 압축파와 전단파 속도의 특성변화를 관찰하는 것이다. 인공동결공법에 의해 채취된 사질토 동결 시료를 모사하기 위해 주문진 표준사를 이용하여 수중강사법으로 60%와 80%의 상대밀도를 가지는 동결시료와 비동결시료를 조성하였다. 동결된 시료는 삼축압축실험용 페데스탈에 거치하여 자연융해하면서 1분 간격으로 시료의 온도를 측정하였다. 시료가 완전히 융해된 후 비동결시료와 동일한 방법으로 실험을 실시하였으며, 포화, 압밀, 전단과정에서 연속적으로 압축파와 전단파를 측정하여 속도를 산정하였다. 실험결과, 동결시료는 비동결시료에 비하여 축차응력과 전단강도는 감소하는 결과를 보였지만, 내부마찰각은 동결-융해의 여부와 상관없이 일정한 값을 나타내었다. 압축파 속도는 포화과정에서 B-value가 증가함에 따라 약 1800 m/s까지 증가하여 수렴하였으나, 압밀과정과 전단과정에서는 일정하게 유지되는 경향을 보였다. 전단파 속도는 포화과정에서 B-value가 증가함에 따라 감소하였고, 압밀과정과 전단과정에서는 시료가 받는 유효응력의 변화에 따라 거동하였다. 실험과정에서 압축파 속도는 상대밀도와 동결-융해여부에 상관없이 유사한 경향을 나타내었으나, 전단파 속도는 같은 상대밀도를 가지더라도 동결-융해시료가 비동결시료에 비해 작은 값을 나타내었다. 본 연구는 동결-융해시료와 비동결시료의 삼축압축실험 결과와 탄성파 특성을 비교함으로써 향후 인공동결공법으로 채취된 비교란 동결시료의 강도평가를 위한 예비실험으로 의의가 있다.
우리나라의 경우 자연사면 산사태는 대부분이 여름철의 집중호우에 의해 발생되며, 암반보다는 주로 토질특성에 영향을 받는다. 그리고 자연사면의 토층은 기반암의 풍화현상에 의해 형성되기 때문에 토질특성은 지질조건에 따라 다르다. 따라서 자연사면의 지반상태를 평가하기 위해서는 지질의 분포양상과 함께 지질조건에 따른 토질특성의 파악이 중요하다. 이 연구는 주로 화산암과 화강암 및 퇴적암이 분포하고 있는 부산지역 자연사면의 토층을 대상으로 지질조건에 따른 토질특성을 분석하였다. 이를 위하여 자연사면에서 채취한 토층시료를 대상으로 각종 토질시험을 수행하여 물리적 성질과 공학적 특성을 파악하고 지질조건과의 상관성을 분석하였다. 그 결과 토층은 주로 양호한 입도의 점토질 모래로 분류되었다. 습윤밀도는 $1.07{\sim}1.99kg/cm^3$, 전단저항각은 $28.2{\sim}39.6^{\circ}$, 투수계수는 $8.10{\times}10^{-5}{\sim}8.38{\times}10^{-2}cm/sec$의 범위로서 대체로 양호한 전단강도와 보통${\sim}$빠른 정도의 투수성지반으로 평가되었다. 그리고 토질특성은 지질별로 서로 다른 경향성을 보였다.
연약지반에서 성토나 교대등에 의한 편재하중이 작용하게 되면 지반중에는 침하, 측방변위, 융기 및 전단파괴 등의 큰 소성적인 전단변형이 발생하여 지반 및 구조물에 큰 피해를 주는 것을 많이 볼 수 있다. 본 연구는 이러한 연약지반에서 편재하중에 의한 지반의 제반변형에 대한 거동을 연구하기 위하여 기존의 이론적인 배경을 조사하고 모형실험을 통한 실측치를 이용하여 서로 비교분석하여 보았다. 모형실험은 먼저 모형재하장치를 제작하고 토조안에 연약한 흙시료를 채워 비배수상태에서 일정한 시간간격으로 하중단계를 증가시켜 가면서 변형의 상태를 관측하였다. 실험결과를 토대로 지반특성과 변위량의 관계, 한계하중 및 극한지지력, 지반의 소성유동의 상태 및 측방 유동압의 검토 등을 상세하게 분석하여 기존의 이론과 비교해 봄으로써 실제 연약지반상에서의 측방변형에 대한 원인을 규명함으로써 그로 인한 피해를 사전에 방지하고자 한다.
Optimal synthetic condition of barium sulfate were investigated from the viewpoint of yield and bulkiness according to a randomized complete block design proposed by G.E.P. Box and K.B. Wilson. Barium chloride and magnesium sulfate were utilized as reactants in order to prepare barium sulfate in this study. It was found that optimum temperature range of reactant solutions was $60{\sim}100^{\circ}C$ and the optimum concentration range of the reactant solutions was $10{\sim}17.3%$ and $10{\sim}20%$ respectively, on the viewpoint of yield and bulkiness. The optimum mole ratio of $BaCI_2$ to $BaSO_4$ was in the range of $1.50{\sim}2.0$ and the optimum mole ratio of $BaCI_2$ to $BaSO_4$ was in the range of $1.50{\sim}2.0$ and the optimum reacting time range was $15{\sim}20$ minutes. The optimum drying temperature range was $110{\sim}130^{\circ}C$ from the viewpoint of yield, but it was $90{\sim}110^{\circ}C$ on the basis of bulkiness. Apparent viscosity of barium sulfate suspensions dispersed in various concentrations of Na. CMC was measured by using Brookfield synchrolectric viscometer model LVT, the relative equation, log ${\eta}_{sp}=A+B.{\phi}$ was examined and the equation was found to agree fairly well. 1 w/v% Na. CMC aqueous solution and 0.1 volume fraction of $BaSO_4$ powder were optimum in the preparation of $BaSO_4$ suspension showing highest viscosity at infinite shearing.
시멘트 모르타르를 이용하여 제작한 압축강도 및 거칠기가 다른 25 종류의 인공절리 모델에 대하여 절리면 전단시험을 실시하였다. 절리면 전단시험은 통상적으로 시행되는 다단계 시험과 ISRM에서 제안된 시험을 사용하였으며, 두 시험간의 마찰각 차이, 다단계 시험의 유용성, 측정된 결과에 대한 경험식과의 비교 연구를 시행하였다. 다단계 시험에서 측정된 마찰각은 ISRM 시험에서 측정된 마찰각보다 약 $6.4^{\circ}$ 낮은 값을 보이며, 시험편의 압축강도와 거칠기가 변화하여도 두 시험에서 측정된 마찰각의 차이는 일정한 값을 보여 다단계 시험은 유용한 것으로 판단된다. 절리면에 가해진 수직응력에 대한 전단응력의 관계를 나타내는 여러 가지 경험식과 본 연구에서 측정된 결과를 비교한 결과 ISRM 시험에 의해 결과는 Patton의 경험식과 유사하고, 다단계 시험에 의한 결과는 Barton의 경험식과 유사한 결과를 보인다.
Aiming at the mechanical and structural characteristics of the contact zone composite rock, the shear tests and numerical studies were carried out. The effects of the differences in mechanical properties of different materials and the normal stress on shear properties of contact zone composite samples were analyzed from a macro-meso level. The results show that the composite samples have high shear strength, and the interface of different materials has strong adhesion. The differences in mechanical properties of materials weakens the shear strength and increase the shear brittleness of the sample, while normal stress will inhibit these effect. Under low/high normal stress, the sample show two failure modes, at the meso-damage level: elastic-shearing-frictional sliding and elastic-extrusion wear. This is mainly controlled by the contact and friction state of the material after damage. The secondary failure of undulating structure under normal-shear stress is the nature of extrusion wear, which is positively correlated to the normal stress and the degree of difference in mechanical properties of different materials. The increase of the mechanical difference of the sample will enhance the shear brittleness under lower normal stress and the shear interaction under higher normal stress.
The model was developed by applying the principles of Bacot and Vidal to measure the behavior of deformation of the reinforced earth wall, and various tasts were performed by using the plastic fabric filter and the galvanized steel plate as a strip. The results obtained are as follows; 1. When the reinforced earth wall is deformed by the load, the strip is completely reinforced by the backfill materials and changed to the rigid block state, under the state of failure which permits sliding only, the next theoretical equation is formed. (H/L) . tan$\theta$ [cosO-sinOtanO] =2sinO[tan($\theta$ +0) +tanO] 2.The degree of the mutual reinforcement of the backfill material and the strip depend on the physical characteristics of the each material especially the angle of shearing resistance of the backfill material is desirable over 20$^{\circ}$ and, if it is over 400, its function could be a maximum. 3.The distribution of the maximum tensile strain of the reinforcement is changing with the height of reinforced earth wall, and when the height from bottom of the reinforced earth wall is 1.85 to 3. 35m, the maximum tensile strain appears at 2m from the skin element. The maximum tensile strain is increased by the depth of the reinforced earth wall from surface, and increased with the lapse of time after construction. 4.The failure surface of the reinforced earth wall by the concrete skin was about 60$^{\circ}$and the failure behavior of the reinforced earth wall in which the fabric filter was buried was slow, and so the pore pressure could be decreased. 5.It is possible to construct the fabric retained earth wall by the plastic fabric filter only. And the reinforcing effect between the steel plate and the plastic fabric filter is not largely different. however, in the aspect of the economic durability, the plastic fabric filter is more advantageous. 6.The reinforcing action mainly depends on the width and the length of the reinforcing materials, if possible, the full width is advantageous to enlarge the contact area with backfill. but considering the economic aspect, it is neccessary to develop the method controlling the space of the strip.
단순만곡형과 Super-V형 전개판의 성능을 비교하기 위하여 모형실험을 실시하였다. 모형전개판은 두께 1mm되는 철판으로써 제작하였으며, 단순만곡형은 만곡도 $12\%$, 평면투영면적 $432cm^2$되게, Super V형은 횡단면의 양곡도가 어디서나 $12\%$되고 평면 투영면적은 $436cm^2$되게 하였다. 실험은 측정의 결과, 단순만곡형은 최대 유교진행각도가 $25^{\circ}$이고, 그 때의 전개력계수는 1.47, 항력계수는 0.42이며, Super-V형은 그것이 각각 $20^{\circ},\;1.40,\;0.40$으로서 유체역학적성능은 단순만곡형이 다소 우수하다고 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.