• Earthquakes and Structures
• /
• 제25권5호
• /
• pp.385-398
• /
• 2023

The parameters of the multiple-vertical-line-element model (MVLEM) of reinforced concrete (RC) shear walls are often empirically determined, which causes large simulation errors. To improve the simulation accuracy of the MVLEM for RC shear walls, this paper proposed a novel method to determine the MVLEM parameters using the artificial neural network (ANN). First, a comprehensive database containing 193 shear wall specimens with complete parameter information was established. And the shear walls were simulated using the classic MVLEM. The average simulation errors of the lateral force and drift of the peak and ultimate points on the skeleton curves were approximately 18%. Second, the MVLEM parameters were manually optimized to minimize the simulation error and the optimal MVLEM parameters were used as the label data of the training of the ANN. Then, the trained ANN was used to generate the MVLEM parameters of the collected shear walls. The results show that the simulation error of the predicted MVLEM was reduced to less than 13% from the original 18%. Particularly, the responses generated by the predicted MVLEM are more identical to the experimental results for the testing set, which contains both flexure-control and shear-control shear wall specimens. It indicates that establishing MVLEM for RC shear walls using ANN is feasible and promising, and that the predicted MVLEM substantially improves the simulation accuracy.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.292-301
• /
• 1994

The resultant cutting force during machining with a worn tool is viewed as a decomposition of the cutting force into a cutting force component related to chip removal from the workpiece and into a component dependent on the contact force between the tool flank's wear land and the workpiece. The shear line method, in which the cutting force is considered proportional to the length of the shear line, is used to calculate the cutting force component for the removal of the chip, while the elastic effect of the workmaterial on the tool is taken into consideration to analyze the effect of tool flank wear. The predicted resultant cutting force, expressed as the sum of both components, is compared to experimental data obtained during wave-on-wave cutting.

• Steel and Composite Structures
• /
• 제13권5호
• /
• pp.409-421
• /
• 2012

Recently, as the height of building is getting higher, the applications of CFST column for high-rise buildings have been increased. In structural system of high-rise building, The RC core and exterior concrete-filled tubular (CFST) column-beam pinned connection is one of the structural systems that support lateral load. If this structural system is used, due to the minimal CFST column thickness compared to that of the CFST column width, the local moment occurred by the eccentric distance between the column flange surface from shear bolts joints degrades the shear strength of the CFST column-beam pinned connections. This study performed a finite element analysis to investigate the shear strength under eccentric moment of the CFST column-beam pinned connections. The column's width and thickness were used as variables for the analysis. To guarantee the reliability of the finite element analysis, an actual-size specimens were fabricated and tested. The yield line theory was used to formulate an shear strength formula for the CFT column-beam pinned connection. the shear strength formula was suggested through comparison on the results of FEM analysis, test and yield lime theory, the shear strength formula was suggested.

• Geomechanics and Engineering
• /
• 제24권2호
• /
• pp.129-141
• /
• 2021

The vacuum preloading method has been used in many countries for soil improvement and land reclamation. However, the treatment time is long and the improvement effect is poor for the straight-line vacuum preloading method. To alleviate such problems, a novel combined air booster and straight-line vacuum preloading method for shallow ground treatment is proposed in this study. Two types of traditional vacuum preloading and combined air booster and straight-line vacuum preloading tests were conducted and monitored in the field. In both tests, the depth of prefabricated vertical drains (PVDs) is 4.5m, the distance between PVDs is 0.8m, and the vacuum preloading time is 60 days. The prominent difference between the two methods is when the preloading time is 45 days, the injection pressure of 250 kPa is adopted for combined air booster and straight-line vacuum preloading test to inject air into the ground. Based on the monitoring data, this paper systematically studied the mechanical parameters, hydraulic conductivity, pore water pressure, settlement and subsoil bearing capacity, as determined by the vane shear strength, to demonstrate that the air-pressurizing system can improve the consolidation. The consolidation time decreased by 15 days, the pore water pressure decreased to 60.49%, and the settlement and vane shear strengths increased by 45.31% and 6.29%, respectively, at the surface. These results demonstrate the validity of the combined air booster and straight-line vacuum preloading method. Compared with the traditional vacuum preloading, the combined air booster and straight-line vacuum preloading method has better reinforcement effect. In addition, an estimation method for evaluating the average degree of consolidation and an empirical formula for evaluating the subsoil bearing capacity are proposed to assist in engineering decision making.

• 물과 미래
• /
• 제29권4호
• /
• pp.187-198
• /
• 1996

난류전단 흐름에서의 비정상 수평 선오염원의 확산에 관한 수치모형을 개발하였다. 계산기법으로는 비정상 이송확산 방정식을 종방향 이송 및 연직방향 확산으로 분리하고, 이들 방정식을 방시간 간격에 대하여 번갈아 계산하는 단계분리 유한차분기법을 사용하였다. 종방향 이송방정식에 대해서는 Holly-Preissmann 기법을, 연직방향 확산방정식에 대해서는 Crank-Nicholson 기법을 각각 적용하였다. 개발된 모형을 난류전단 흐름에서의 정상 수평 선오염원의 확산 문제에 적용하여 계산결과를 반해석해와 비교함으로써 모형을 검증하였다. 또한 난류전단 흐름내로 순간적으로 방류된 면오염원의 확산문제에 계산모형을 적용하였다. 마찰계수에 대한 민감도 분석 결과, 동일한 무차원 시각에서의 혼합 정도는 마찰계수에 관계없이 거의 일정한 것으로 나타났다. 또한 동일한 정도의 혼합상태에 도달하는 데 소요되는 유하거리는 마찰계수의 제곱근에 반비례함을 알 수 있었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.285-292
• /
• 2004

The objective of this paper is to develop a simplified method to determine yield line patterns of reinforced concrete floor slabs based on the elastic fields. Unlike other methods mainly focused on the plasticity theory, this paper emphasizes the elastic fields, especially principal moments and maximum shears and shows a link between elasticity field and yield line patterns. General criteria on both positive and negative yield lines are suggested in terms of principal moments and maximum shear forces. The proposed method can predict starting point (or regions) of yielding and the further development of yield lines on whole structures. The yield line patterns determined by the proposed method are shown to be coincident with the classical yield line theory. Furthermore, orthotropy in reinforced concrete slab is investigated and yield line patterns for different type of flat slab with non-isotropic strip are studied broadly.

• 한국지반공학회논문집
• /
• 제29권8호
• /
• pp.15-25
• /
• 2013

본 연구에서는 다짐된 편마풍화토의 불포화토 전단강도특성을 규명하기 위하여, Constant Water Content Compression (CWCC) 시험을 실시하였다. 두 가지 상대밀도로 구분하여 정적 다짐으로 공시체가 제작되었고, 초기 포화도를 변화시킴으로써 초기 흡수력 및 최대전단강도가 구현될 때의 흡수력에 따른 전단거동을 살펴보았다. 흡수력은 세라믹디스크와 간극수압계의 설치에 의해 직접 측정되었고, 이 흡수력을 적용하여 흡수응력(ps)이 추정되었다. CWCC 시험에서 얻어진 최대압축강도에 대한 결과는 삼축압축시험에서의 포화상태 파괴선(Mp Line)과의 관계, 즉 흡수력에 의해 발현된 전단강도의 변화를 흡수응력을 이용하여 살펴보았다. 또한, Kim 등(2010)이 제안한 Suction stress-SWCC Method (SSM)을 활용하여 흡수응력의 적용성에 대해 논하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.281-285
• /
• 2002

A new method of dynamic contact force measurement between a pantograph and a contact wire is proposed in this paper The method does not require design modification of an original pantograph in order to install sensors such as load cells. Contact forces can be expressed as the sum of vertical shear forces at the support points and inertial forces. Using specially-designed strain gage rosettes. vertical shear forces at the supported points can be measured without noise mixing and thermal effects. In order to obtain contact forces from shear forces, 3 inertial force compansation methods are proposed and compared in this paper. By validation process, the new proposed measurement method is verified to be applicable to the on-line current collection test.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.176-181
• /
• 2000

Stress intensity factors for a rigid line inclusion tying along a bimaterial interface are calculated by the boundary element method with the multiregion and double-Point techniques. The formula between the stress intensity factors and the inclusion surface stresses are derived. The numerical values of the stress intensity factors for the bimaterial interface rigid line inclusion in the infinite body are proved to be in good agreement within 3% when compared with the previous exact solutions. In the finite bimaterial systems, the stress intensity factors for the center and edge rigid line inclusions at interface are computed with the variation of the rigid line inclusion length and the shear modulus ratio under the biaxial and uniaxial loading conditions.

• 한국지반공학회논문집
• /
• 제22권10호
• /
• pp.151-163
• /
• 2006

본 논문에서는 모래의 비배수 정적전단거동과 반복전단거동의 상호관계를 분석하기 위하여 낙동강 모래를 사용하여 비배수 정적 및 반복삼축시험을 실시하였다. 정적삼축시험은 반복전단거동과의 상호비교를 위하여 인장시험을 포함하여 실시하였다. 그리고 반복삼축시험은 초기정적전단응력$(q_{st})$과 반복응력$(q_{cy})$조건을 조합하여 여러 응력조건 하에서 실시하였다. 시험결과 반복전단거동의 응력경로는 정적전단거동의 한계응력비(CSR)선을 지나면서 유동변형이 발생하여 정적전단거동과 일치하였으며, 그 후 정적전단거동의 파괴선(FL)을 따라 파괴가 발생하였다. 이러한 반복 전단거동의 응력경로는 시험방법이 다름에 따른 약간의 차이는 있으나 정적전단거동의 응력경로와 본질적으로 동일함을 알 수 있었다.