• 대한금속재료학회지
• /
• 제48권1호
• /
• pp.8-18
• /
• 2010

This study aimed at investigating quasi-static and dynamic torsional deformation behavior of three API X70 and X80 linepipe steels. Quasi-static and dynamic torsional tests were conducted on these steels. having different grain sizes and volume fractions of acicular ferrite and polygonal ferrite, using a torsional Kolsky bar. The test data were then compared via microstructures and adiabatic shear band formation,. The dynamic torsional test results indicated that the steels rolled in the single phase region had higher maximum shear stress than the steel rolled in the two phase region, because the microstructures of the steel rolled in the single phase region were composed mainly of acicular ferrites. In the X80 steel rolled in the single phase region, the increased dynamic torsional properties could be explained by a decrease in the overall effective grain size due to the presence of acicular ferrite having smaller effective grain size. The possibility of adiabatic shear band formation was analyzed from the energy required for void initiation and variation in effective grain size.

• 대한치과보철학회지
• /
• 제48권4호
• /
• pp.251-258
• /
• 2010

연구 목적: 이 연구의 목적은 표면처리방법이 지르코니아와 네 종류의 시멘트의 전단결합 강도에 미치는 영향을 평가하는 것이다. 연구 재료 및 방법: 총 120개의 디스크 모양의 산화 지르코늄 (3Y-TZP, Kyoritsu, Tokyo, Japan) 시편을 다음과 같이 표면처리 하였다: (1) $110\;{\mu}m$ 산화 알루미나 분사처리 (2) Silica coating ($Rocatec^{TM}$ 3M ESPE)를 이용한 표면처리 (3) 처리하지 않음. 각각의 표면 처리 후, 2종의 자가 접착형 시멘트 (RelyX Unicem, Maxcem)와 레진 강화 글라스 아이오노머 시멘트 (RelyX Luting), Bis-GMA 레진 시멘트 (Nexus3)를 시편에 부착하였으며 각 군은 UTM을 이용하여 전단결합강도를 측정하였다. 표면처리, 시멘트의 종류에 따른 결합강도의 차이를 살펴보기 위하여 일원변량분석 (One-way ANOVA)과 이원변량분석 (two-way ANOVA)을 이용하고 사후 분석으로 Tukey HSD test를 실시하였다. 결과: 로카텍 처리 후, RelyX Unicem을 부착한 군이 가장 높은 결합 강도를 보였으며 (P<.05) 알루미나 분사처리를 한 군과 로카텍 처리를 한 군은 아무런 처리를 하지 않은 군보다 유의하게 높은 결합 강도를 보였다 (P<.05). 또한 모든 표면상태에서 RelyX Luting은 다른 군에 비해 통계적으로 유의하게 가장 낮은 결합강도를 보였다 (P<.05). 결론: 본 연구의 결과에 따르면 RelyX Unicem은 지르코니아와 강한 결합력을 보였으며 로카텍 처리는 결합을 증진시키는데 효과적이었다.

• 대한금속재료학회지
• /
• 제48권1호
• /
• pp.1-7
• /
• 2010

Experiments have demonstrated that the addition of a moderate amount of V to $Fe_{52}Co_{(20-x)}B_{20}Si_4Nb_4V_x$ amorphous alloy enhances the plasticity of the alloy. In particular, $Fe_{52}Co_{17.5}B_{20}Si_4Nb_4V_{2.5}$ alloy withstood a maximum of 8.3% strain prior to fracture along with a strength exceeding 4.7 GPa. Energy dispersive x-ray spectroscopy conducted on the $Fe_{52}Co_{17.5}B_{20}Si_4Nb_4V_{2.5}$ alloy exhibited evidence of compositional modulation, indicating that nm-scale phase separation had occurred at local regions. In this study, the role played by nm-scale phase separation on the plasticity was investigated in terms of structural disordering and shear localization in order to better understand the structural origin of the enhanced plasticity shown by the developed alloy.

• 대한치과기공학회지
• /
• 제32권3호
• /
• pp.195-207
• /
• 2010

Purpose: The purpose of this study was to observe the microstructural changes of surface in the specimens, performing the shear bond strength testing. The currently most used non-precious alloys are nickel-chromium based alloys with or without beryllium. However, their biocompatibility has been questioned concerning possible damages to the health of the patient and professionals involved in the fabrication of prosthesis caused by long exposure to Ni and Be. An option to nickel-chromium alloys is the cobalt-chromium alloy, an alternative that does not sacrifice the physical properties of the metal porcelain systems. Studies in the animals substantially show that the cobalt-chromium alloys are relatively well tolerated, being therefore more biocompatible than the nickel-chromium alloys. Methods: Non-addition Be to nickel-chromium based alloy(Bellabond plus) and cobalt-chromium alloy which has been widely used(Wirobond C) fused with ZEO light porcelain classified control group and cobalt-chromium alloy which is developing alloy of Alphadent company in Korea(Alphadent alloy) fused with ZEO light porcelain classified experimental group. The specimens of $4mm{\times}4mm{\times}0.5mm$ were prepared as-cast and as-opaque to cast body to analyze the mechanical characteristic change, the microstructure of alloy surface. The phase change was used to observe through XRD analysis and OM/SEM was used to observe the surface of specimens as-cast and as-opaque to cast body. Chemical formation of their elements was measured with EDS. Then hardness was measured with Micro Vicker's hardness tester. Shear bond strength test thirty specimens of $10mm{\times}10mm{\times}2mm$ was prepared, veneered, 3mm high and 3mm in diameter, over the alloy specimens. The shear bond strength test was performed in a universal testing machine(UTM) with a cross head speed of 0.5mm/min. Ultimate shear bond strength data were analyzed with one-way ANOVA and the Scheffe's test (P<0.05). Within the limits of this study, the following conclusions were drawn: The X-ray diffraction analysis results for the as-cast and as-opaque specimens showed that the major relative intensity of Bellabond plus alloy were changed smaller than Wirobond C and Alphadent Co-Cr based alloys. Results: Microstructural analysis results for the opaque specimens showed all the alloys increased carbides and precipitation(PPT). Alphadent Co-Cr based alloy showed the carbides of lamellar type. The Vickers hardness results for the opaque specimens showed Wirobond C and Alphadent Co-Cr based alloys were increaser than before ascast, but Bellabond plus alloy relatively decreased. The mean shear bond strengths (MPa) were: 33.11 for Wirobond C/ZEO light; 25.00 for Alphadent Co-Cr alloy/ZEO light; 18.02 for Bellabond plus/ZEO light. Conclusion: The mean shear bond strengths for Co-Cr and Ni-Cr based alloy were significantly different. But the all groups showed metal-metal oxide modes in shear bond strengths test at the interface.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권2호
• /
• pp.82-88
• /
• 2010

본 연구의 목적은 내진규준이 적용되기 이전에 건설된 역사건물의 내진성능 평가 및 내진보강이다. 이를 위하여 2층 RC 역사건물의 내진성능이 평가되었다. 동적해석에 의한 층간변위비 및 층전단력 평가결과, 층전단력이 설계기준의 밑면전단력을 초과하는 것으로 평가되어 적절한 내진보강이 필요한 것으로 평가되었다. 내진성능 향상을 위하여 총 4개의 강재댐퍼가 사용되었다. 해석 변수는 강재댐퍼 형상 및 설치 방법이다. 동적해석결과 역 K가새로 설치되는 슬릿댐퍼가 다른 댐퍼 형상 및 설치 방법보다 우수한 내진성능을 가진 것으로 평가되었다.

• 대한금속재료학회지
• /
• 제48권8호
• /
• pp.705-716
• /
• 2010

Effects of specimen thickness and notch shape on fracture mode appearing in drop weight tear test (DWTT) specimens of API X70 and X80 linepipe steels were investigated. Detailed microstructural analysis of fractured DWTT specimens showed that the fractures were initiated in normal cleavage mode near the specimen notch, and that some separations were observed at the center of the fracture surfaces. The Chevron-notch (CN) DWTT specimens had broader normal cleavage surfaces than the pressed-notch (PN) DWTT specimens. Larger inverse fracture surfaces appeared in the PN DWTT specimens because of the higher fracture initiation energy at the notch and the higher strain hardening in the hammer-impacted region. The number and length of separations were larger in the CN DWTT specimens than in the PN DWTT specimens, and increased with increasing specimen thickness due to the plane strain condition effect. As the test temperature decreased, the tendency to separations increased, but separations were not found when the cleavage fracture prevailed at very low temperatures. The DWTT test results, such as upper shelf energy and energy transition temperature, were discussed in relation with microstructures and fracture modes including cleavage fracture, shear fracture, inverse fracture, and separations.

• 한국지반환경공학회 논문집
• /
• 제14권5호
• /
• pp.49-56
• /
• 2013

천연자원을 개발하기 위한 심해저 탐사의 필요성이 증가하고 있다. 동해 울릉분지에서 수행된 가스 하이드레이트 심부 시추 사업(UBGH2)에서 획득된 시료로 지반공학적 기본특성 및 강도특성을 분석하였다. 아터버그 한계, 비표면적, 입도분포 등 기본 토질 실험을 실시하고 선행연구와 비교하였다. 광물학적 특성, 화학 조성, 미세구조 관찰을 위하여 XRD, SEM 그리고 EDS를 실시하였다. 또한 벤더 엘리먼트를 설치한 삼축압축셀을 이용하여 삼축압축실험을 수행하면서 강도정수와 전단파 거동을 분석하였다.

• 열처리공학회지
• /
• 제23권5호
• /
• pp.233-238
• /
• 2010

The phase transformations and the shape memory effect in In-rich Pb alloys and In rich-Sn alloys have been studied by means of X-ray diffractometry supplemented by metallographic observations. The alloys containing 12~15 at.%Pb transform from the ${\alpha}_2$ (fct) phase to the ${\alpha}_1$ (fct) phase by way of an intermediate phase (m phase) on cooling. The results of X-ray diffraction show that the metastable intermediate phase is observed both on cooling and heating, and has a face-centered orthorhombic (fco) structure. It is concluded that the ${\alpha}_1{\rightleftarrows}{\alpha}_2$ transformation is expressed by the ${\alpha}_1{\rightleftarrows}m{\rightleftarrows}{\alpha}_2$ transformation both on usual cooling and heating with the rate more than $8{\times}10^{-3}$ K/s. The $m{\rightleftarrows}{\alpha}_2$ transformation takes place with a mechanism involving macroscopic shear and are of diffusionless (martensitic) type. The temperature hysteresis in the two transformations is 10~13 K between the heating and cooling transformations. The alloys containing 0~11 at.%Sn are -phase solid solutions with a face centered tetragonal structure (c/a > 1) at room temperature, the axial ratio increasing continuously with tin content. The In-(11~15) at.%Sn alloys are mixtures of ${\alpha}$ and ${\beta}$ phases, the ${\beta}$ phase having a f. c. tetragonal structure (c/a < 1). The alloys containing more than 15 at.%Sn are ${\beta}$-phase solid solutions. The In-(12.9~15.0) at.%Sn alloys show a shape memory effect only when quenched to the temperature of liquid nitrogen, although their effect becomes weak and finally disappears after keeping at room temperature for a long time. The ${\beta}{\rightarrow}{\alpha}^{\prime}$ phase transformation is of the diffusionless (martensitic) type, and takes place between 330 K at 12.9 at.%Sn and 150 K at 14.5 at.%Sn. The hysteresis of transformation temperatures on heating and cooling is considerably large (29~40 K), depending on the composition. Both In-Pb and In-Sn alloys showed distinct the shape memory effects.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.2000-2010
• /
• 2021

Mechanical moduli, such as Young's modulus (E), Bulks modulus (B), Shear modulus (S), longitudinal modulus (L), Poisson's ratio (σ) and micro Hardness (H) were theoretically calculated for (100-x)TeO₂+x MgO glasses, where x = 10, 20, 30, 40 and 45 mol%, based on the Makishima-Mackenzie model. The estimated results showed that the mechanical moduli and the microhardness of the glasses were improved with the increase of the MgO contents in the TM glasses, while Poisson's ratio decreased with the increase in MgO content. Moreover, the radiation shielding capacity was evaluated for the studied TM glasses. Thus, the linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), transmission factor (TF) and half-value thickness (𝚫_0.5) were simulated for gamma photon energies between 0.344 and 1.406 MeV. The simulated results showed that glass TM10 with 10 mol % MgO possess the highest LAC and varied in the range between 0.259 and 0.711 cm^-1, while TM45 glass with 45 mol % MgO possess the lowest LAC and vary in the range between 0.223 and 0.587 cm^-1 at gamma photon energies between 0.344 and 1.406 MeV. Furthermore, the BXCOM program was applied to calculate the effective atomic number (Z_eff), equivalent atomic number (Z_eq) and buildup factors (EBF and EABF) of the glasses. The effective removal cross-section for the fast neutrons (ERCSFN, ∑_R) was also calculated theoretically. The received data depicts that the lowest ∑_R was achieved for TM10 glasses, where ∑_R = 0.0193 cm² g^-1, while TM45 possesses the highest ERCSFN where ∑_R = 0.0215 cm² g^-1.

• 한국철도학회논문집
• /
• 제13권6호
• /
• pp.546-551
• /
• 2010

본 연구에서는 단일겹치기 접착 체결부에 대한 유한요소해석을 통해 요소의 조밀도 및 유한요소의 종류에 따른 접착 층의 변형률 분포를 Tsai의 시험치 와 비교하여 분석하였다. 이를 위해 접합부재의 길이방향, 접착체결부의 길이방향, 접합부재의 두께방향, 접착 층의 두께방향 및 조인트의 폭방향의 요소 조밀 도를 변화시켰다. 또한, 솔리드, 쉘 및 평면 변형률 요소에 따른 효과도 분석하였다. 해석은 단일 겹치기 접착 체결부의 대변형을 고려하기 위한 기하학적 비선형 해석을 수행하였다. 이를 통해 솔리드 요소를 적용할 경우 접착부재의 길이방향으로의 요소 수는 최소 2개 이상이면 해석의 신뢰도를 확보할 수 있음을 확인할 수 있었다. 쉘 요소의 겨우 x/c=1에서 수직 변형률의 시험결과와 22.8%의 오차를 보였으나, 전단응력의 경우에는 1.67%로 시험치와 거의 일치하였다.