• Korean Journal of Veterinary Service
• /
• v.16 no.1
• /
• pp.11-19
• /
• 1993

This experiment was carried out to detect the residues of sulfonamides in raw milk. Raw milks which does not contain sulfonamides was collected from one of the farm and fortified with 5 sulfonamides (sulfamerazine, sulfamethazine, sulfamonomethoxine, sulfadimethoxine, sulfaqinoxaline). The sulfonamides in the fortified sample were extracted and detected by High Performance Liquid Chromatography. UV /vis detector was used in this experiment. The results obtained were summarized as follows : 1. Chloroform was good as a extracting solution. 2. 15.5% methanol in PDP as a mobile phase solution was best detective condition for SMR, SMT, SMM. But for SDM and SQN the best condition was 23% methanol. 3. The detectable limits of SMR, SMT, SMM were 2ppb. but SDM and SQN were 20ppb because of delayed retention time and relatively low recovery rate. 4. The peaks of SMR, SMT, SMM and SDM were erected at baseline and the apexes were sharp but SQN was round shape.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.168-171
• /
• 2005

The present study describes the prediction of the flow induced noise level of a high-speed rotating hexagonal disk and proposes the way how to reduce it. Since a hexagonal disk, which is used in the laser printer and named a polygon mirror, has six sharp comers, there are low and high pressure regions on each of six edges when it rotates. Therefore, the Pressure difference generates three dimension flow field and causes aerodynamic noise. The Ffowcs-Williams and Hawkings(FWH) method is employed for the analysis. We have measured the sound pressure levels and compared them with the computational results. The calculated sound pressure levels agree well with the experimental results. We modified the shape of the edges of a hexagonal disk to reduce the noise level and confirm their effects through numerical computation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.454-457
• /
• 2019

Controlling the shape of Ag nanoparticles (NPs) is very difficult. In the present work, urchin Ag NPs with different sizes and pod length control have been synthesized successfully in high yield by the concentration of a reducing agent. Unique Ag NPs were observed by TEM and SEM. These nanocrystals exhibit tunable surface plasmon resonance properties from the visible to near-infrared regions. They were applied to surface-enhanced Raman scattering (SERS) substrates using rhodamine 6G (R6G), benzenethiol (BT), and 4-amino benznethiol (4-ABT) molecules. The enhanced local field effect due to the sharp pod length, size, and surface plasmon of the urchin Ag NPs resulted in enhanced SERS properties and can serve as high-sensitivity substrates for SERS measurements.

• Animal cells and systems
• /
• v.16 no.3
• /
• pp.254-259
• /
• 2012

The riffle beetle genus Leptelmis is newly recorded in the Korean fauna with descriptions of two new species, L. coreana, n. sp. and L. ochra, n. sp. Dorsal habitus and line-drawings of diagnostic characters are provided. The adults of L. coreana and L. ochra are similar to those of L. gracilis Sharp or L. parallela Nomura in general appearance, but can be distinguished by the absence of apical spurs on the middle and hind tibiae, light brown body color, smaller body size, and the shape of aedeagus apex. Leptelmis coreana can be distinguished from L. ochra by the absence of hindwings, lack of prominent humeri and wider elytra in posterior portion. Adults of both species occur in lowland streams and large rivers, but L. ochra were encountered relatively infrequently.

• Journal of the Korean Society of Visualization
• /
• v.17 no.2
• /
• pp.39-47
• /
• 2019

Impingement cooling utilizing synthetic jets is emerging as a popular cooling technique because of its high local cooling efficiency. The interaction between the vortex structure of the synthetic jet and the surface is crucial in understanding the mechanism of this technique. In this study, the impinging vortex structure and its advection are investigated by experiments with jet-to-surface spacing $2{\leq}H/D{\leq}7$, and synthetic jet Reynolds number $5120{\leq}Re{\leq}9050$. Using phase-locked particle image velocimetry, ensemble averaged (phase averaged) flow fields are obtained, and vortex identification and quantification techniques are applied. The shape, trajectory, and intensity change of the vortex are assessed. A sharp decline in the vortex intensity and the occurrence of a counter-rotating vortex at the impingement point are observed.

• Animal Systematics, Evolution and Diversity
• /
• v.36 no.4
• /
• pp.420-423
• /
• 2020

As a result of continuous taxonomic studies on the Korean crabs, Carcinus aestuarii Nardo, 1847 belonging to the superfamily Portunoidea is newly reported from Korean waters. Carcinus aestuarii has characteristics as followings: cardiac, hepartic and brachial regions are divided by deep furrow; shape of three lobes in frontal area is flatter with hairy; inside of carpus is with one sharp tooth; the posterior-lateral margin of the carapace is concave, and so on. The examined specimen doesn't have hairy and bump on outer margin of the chelipeds which differed from the previous description of the specimens collected from Tokyo Bay, Japan. Here, the diagnosis and the picture of Korean specimen is provided. Korean portunoids currently consist of 20 species belonging to 10 genera.

• Steel and Composite Structures
• /
• v.23 no.5
• /
• pp.571-583
• /
• 2017

A kind of accordion-web RBS connection, "Tubular Web RBS (TW-RBS)" connection is proposed in this research. TW-RBS is made by replacing a part of web with a tube at the desirable location of the beam plastic hinge. This paper presents first a numerical study under cyclic load using ABAQUS finite element software. A test specimen is used for calibration and comparison of numerical results. Obtained results indicated that TW-RBS would reduce contribution of the beam web to the whole moment strength and creates a ductile fuse far from components of the beam-to-column connection. Besides, TW-RBS connection can increase story drift capacity up to 9% in the case of shallow beams which is much more than those stipulated by the current seismic codes. Furthermore, the tubular web like corrugated sheet can improve both the out-of-plane stiffness of the beam longitudinal axis and the flange stability condition due to the smaller width to thickness ratio of the beam flange in the plastic hinge region. Thus, the tubular web in the plastic hinge region improves lateral-torsional buckling stability of the beam as just local buckling of the beam flange at the center of the reduced section was observed during the tests. Also change of direction of strain in arc shape of the tubular web section is smaller than the accordion webs with sharp corners therefore the tubular web provides a better condition in terms of low-cycle fatigue than other accordion web with sharp corners.

• Journal of Yeungnam Medical Science
• /
• v.32 no.1
• /
• pp.31-34
• /
• 2015

In Korea, cases of direct insertion of foreign bodies into the rectum are rare in the literature. Most cases of rectal insertion of foreign bodies are associated with sexual acts and psychiatric disorder such as schizophrenia. Objects inserted into the anus are usually blunt and shaped like the male genitalia. The removal method can be varied depending on the size and shape of the foreign object, its anatomical location, and the accompanying complications. In cases wherein attempts to remove the object fail or there are rectal perforation and peritonitis complications, immediate laparotomy may be required in order to prevent serious complications such as sepsis. Here, we report on a case of rectal perforation and peritonitis due to insertion of a foreign body in a middle-aged patient, with a literature review. He inserted a sharp pig backbone in his rectum and he only had depression. The patient underwent a Hartmann's operation as well as psychiatric counseling and treatment. Thus, after removal of foreign bodies, psychiatric counseling and treatment should be carried out in order to prevent similar accidents and to minimize the need for trauma medicine.

• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.255-263
• /
• 1999

The laboratory datas are for local scour depth measurement at vertical-wall abutment. These include the data to demonstrate the effects of local scour depth of abutment nose shape, alignment angle, flow depth and flume slope. The pattern of local scour were measured and analyzed the abutments which are rectangular, sharp, chamfered rectangular and ablong nose shapes. The experiments were carried out with varing the flume slope and alignment algle increasing flow depth every step in 1cm for four abutment types on the live-bed scour conditions. The flume slope and alignment angle were varied in five cases : for latter 30 $^{\circ}$, 60 $^{\circ}$, 90 $^{\circ}$, 120 $^{\circ}$ and 150 $^{\circ}$, for former 0.01%, 0.03%, 0.05%, 0.1% and 0.2%. The maximum scour depths were analyzed for the shaped of abutment nose with rectangular, ablong, chamfered rectangular and sharp in order. The results of the experiments show that the scour depth varies not only with abutment nose shapes and alignment angle but also with the flow depth and flume slope.

• Journal of the Korean Society for Railway
• /
• v.15 no.3
• /
• pp.217-223
• /
• 2012

This study describes an experimental investigation about the impact damage characteristics of various types of high speed train window glass. Kinds of impact test standards for glass were studied and impact test considering scattering ballast were developed. Windows with external impact side made with annealed, heat strengthened and tempered glasses are likely to be broken by sharp tipped falling object. Broken shape of annealed glass is like line in part and that of heat strengthened glass is line on the whole. Tempered glass is destroyed to pieces. The change of tip type from sharp to blunt makes the higher destroyed level. Tempered glass has higher strength than annealed glass with blunt tip. When the protective films are attached to glasses, strength against destruction increases. In case of real ballast test, glasses without protective films were destroyed, but those with protective films are hard to be broken.