• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.5
• /
• pp.703-717
• /
• 2002

This paper illustrates the implementation of a scalable shared buffer asynchronous transfer mode (ATM) switch. The designed shared buffer ATM switch has a shared buffet of a pipelined memory which has the access time of 4 ns. The high-speed buffer access time supports a possibility of the implementation of a shared buffer ATM switch which has a large switching capacity. The designed switch architecture provides flexible switching performance and port size scalability with the independence of queue address control from buffer memory control. The switch size and the buffer size of the designed ATM switch can be reconfigured without serious circuit redesign. The designed prototype chip has a shared buffer of 128-cell and 4 ${\times}$ 4 switch size. It is integrated in 0.6um, double-metal, and single-poly CMOS technology. It has 80MHz operating frequency and supports 640Mbps per port.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.435-444
• /
• 1995

We propose a new approach to the calculation of the exact cells loss probability in a shared buffer ATM multiplexer, which is loaded with homogeneous discrete-time ON-OFF sources. Renewal cycles are identified in regard to the state of input sources and the buffer state on each renewal circle is modelled as a K(shared buffer size)-state Markov chain. We also analyze the behavior of queue build-up at the shared buffer whose distribution together with the steady-state probabilities of the Markov chain leads to the exact cell loss probability. Our approach to obtaining the exact cell loss probability seems to be more efficient than most of other existing ones since our underlying Markov chain has less number of states.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.725-732
• /
• 2005

The reconfiguration management scheme changes a logical topology in response to changing traffic patterns in the higher layer of a network or the congestion level on the logical topology. In this paper, we formulate a reconfiguration scheme with a shared buffer-constrained cost model based on required quality-of-service (QoS) constraints, reconfiguration penalty cost, and buffer gain cost through traffic aggregation. The proposed scheme maximizes the derived expected reward-cost function as well as guarantees the required flow's QoS. Simulation results show that our reconfiguration scheme significantly outperforms the conventional one, while the required physical resources are limited.

• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.82-89
• /
• 2003

In this paper, an efficient threshold-based filtering (TF) buffer management scheme is proposed. The TF is capable of minimizing the overall loss performance and improving the fairness of buffer usage in a shared buffer packet switch. The TF consists of two mechanisms. One mechanism is to classify the output ports as sctive or inactive by comparing their queue lengths with a dedicated buffer allocation factor. The other mechanism is to filter the arrival packets of inactive output ports when the total queue length exceeds a threshold value. A theoretical queuing model of TF is formulated and resolved for the overall packet loss probability. Computer simulations are used to compare the overall loss performance of TF, dynamic threshold (DT), static threshold (ST) and pushout (PO). We find that TF scheme is more robust against dynamic traffic variations than DT and ST. Also, although the over-all loss performance between TF and PO are close to each other, the implementation of TF is much simpler than the PO.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.2
• /
• pp.86-94
• /
• 2014

Optical packet switching (OPS) is being considered as one of the switching technologies for a future optical internet. For contention resolution in an optical packet switching (OPS) system, the wavelength dimension is generally used in combination with a fiber delay line (FDL) buffer. In this article, we propose a method to reduce the number of tunable wavelength converters (TWCs) by sharing TWCs for a cost-effective design of an asynchronous OPS system with a shared or an output FDL buffer. Asynchronous and variable-length packets are considered in the OPS system design. To investigate the number of TWCs needed for the OPS system, an algorithm is proposed, which searches for an available TWC and an unused internal wavelength, as well as an outgoing channel. This algorithm is applied to an OPS system with a shared or an output FDL buffer. Also, the number of internal wavelengths (i.e., the conversion range of the TWC) needed for an asynchronous OPS system is presented for cost reduction of the OPS system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.736-744
• /
• 2016

Network on chip (NoC) is an emerging technology in the field of multi core interconnection architecture. The routers plays an essential components of Network on chip and responsible for packet delivery by selecting shortest path between source and destination. State-of-the-art NoC designs used routing table to find the shortest path and supports four ports for packet transfer, which consume high power consumption and degrades the system performance. In this paper, the multi port multi core router architecture is proposed to reduce the power consumption and increasing the throughput of the system. The shared buffer is employed between the multi ports of the router architecture. The performance of the proposed router is analyzed in terms of power and current consumption with conventional methods. The proposed system uses Modelsim software for simulation purposes and Xilinx Project Navigator for synthesis purposes. The proposed architecture consumes 31 mW on CPLD XC2C64A processor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2850-2861
• /
• 1996

This paper describes the design of AATM switch LIS of shared buffer type with linked-list architecture to control memory access. The proposed switch LSI consists of the buffer memory, controller and FIFO memory blocks and two special circuits to avoid the cell blocking. One of the special circuit is a new address control scheme with linked-list architecture which maintains the address of buffer memory serially ordered from write address to read address. All of the address is linked as chain is operated like a FIFO. The other is slip-flag register it will be hold the address chain when readaddress missed the reading of data. The circuits control the buffer memory efficiently and reduce the cell loss rate. As a result the designed chip operates at 33ns and occupied on 2.7*2.8mm$^{2}$ using 0.8.mu.m CMOS technology.

• The KIPS Transactions:PartA
• /
• v.9A no.2
• /
• pp.147-162
• /
• 2002

Multi-processor system with fast I/O devices improves processing performance and reduces the bottleneck by I/O concentration. In the system, the Performance influenced by shared memory used for exchanging data between processors varies with configuration and utilization. This paper suggests a prediction model for buffer and shared memory optimization under interrupt recognition method using mailbox. Ethernet (IEEE 802.3) packets are used as the input of system and the amount of utilized memory is measured for different network bandwidth and burstiness. Some empirical studies show that the amount of buffer and shared memory varies with packet concentration rate as well as I/O bandwidth. And the studies also show the correlation between two memories.

• Journal of KIISE:Databases
• /
• v.35 no.6
• /
• pp.469-480
• /
• 2008

A shared disk (SD) cluster couples multiple nodes for high performance transaction processing, and all the coupled nodes share a common database at the disk level. To reduce the number of disk accesses, each node caches database pages in its memory buffer. Since a particular page may be cached simultaneously in different nodes, cache consistency should be maintained to ensure that nodes can always access the most recent version of database pages. Most cache consistency schemes proposed in the SD cluster adopted LRU as a buffer replacement algorithm. In this paper, we first present four buffer replacement algorithms that consider the characteristics of the SD cluster. Then we compare the performance of the buffer replacement algorithms. We perform the experiments on a variety of cluster configurations and database workloads. The experiment results show that the proposed algorithms achieve performance improvement up to 5 times of LRU algorithm.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.68-77
• /
• 1996

In this paper, we investigate the effect of a LAN traffic on the performance of a shared buffer ATM switch andIWF (interworking function )on a LAN environment through simulations. Firstly, the delay and the buffer occupancy of the switch and IWF are mesured according to the proportion of the LAN traffic to the traffic generated by gernoulli process. Secondly, we investigate the behavior of the switch in the case that LAN traffic is concentrated to a connectionless server, and the effect of LAN traffic shaping at IWF on the delay and the buffer occupancy of the switch.