• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.384-388
• /
• 2003

In this paper, we have proposed a OFDM/QPSK-DMR(Orthogonal frequency Division Multiplexing/Quadrature Phase Shift Keying Modulation-Digital Microwave Radio)system using BL-PSF(Band-limited pulse shaping filter) over the Microwave channel. In the proposed DMR system, STS-1(51.84 Mbps) of SONET(Synchronous Optical NETwork) is first modulated by OFDM/QPSK symbol and used Band-limited pulse shaping filter. The advantage of the proposed DMR system is to simplify system complexity and increase IFFT/FFT block use-efficiency. The system performance of single carrier and OFDM systems is already proved that those of DMR systems have the same performance over AWGN(Additive White Gaussian Noise) channel environment. Therefore, the system is analyzed between proposed OFDM/QPSK-DMR and single carrier DMR systems and simulated by BER performance and Signature curve over Microwave channel environment. Simulation result is that the proposed system performances are approaching to the performance of single carrier DMR system as the number of Sub-carriers increasing.

• Restorative Dentistry and Endodontics
• /
• 제37권4호
• /
• pp.220-227
• /
• 2012

Objectives: The study was to compare the shaping ability of Reciproc (VDW) and WaveOne (Dentsply Maillefer) instruments compared with ProTaper, Profile and hand instrument during the preparation of simulated root canals. Materials and Methods: Five groups (n = 5) were established. Reciproc, WaveOne, ProTaper, Profile and K file (K-flexo file) were used to prepare the resin simulated canals. A series of preoperative and postoperative images were taken by a microscope and superimposed in 2 different layers. The amount of resin removed from both the inner and the outer sides of the canal was measured to the level of 10 mm from the apical tip, with a 1 mm increment. Results: The mean of resin removal from the inner canal wall was not different from the outer canal wall for Reciproc and WaveOne groups at apical third (1 - 3 mm level). There was no difference in the change of working length and maintenance of canal curvature. NiTi instruments are superior to stainless-steel K file in their shaping ability. Conclusions: Within the limitation of this present study, Reciproc and WaveOne instruments maintained the original canal curvature in curved canals better than ProTaper and Profile, which tend to transport towards the outer canal wall of the curve in the apical part of the canal.

• 소성∙가공
• /
• 제23권5호
• /
• pp.303-310
• /
• 2014

Functionally graded properties are characterized by the gradual variation in composition and structure through the volume of the material, resulting in corresponding gradation in properties of the material. Direct laser melting (DLM) is a prototyping process whereby a 3-D part is built layer-wise by melting metal powder with laser scanning. Studies have been performed on the functionally graded properties induced by direct laser melting of compositionally selected metallic powders. For the current study, quadrangle structures were fabricated by DLM using Fe-Ni-Cr powders having variable compositions. Hardness and EDX analysis were conducted on cross-sections of the fabricated structure to characterize the properties. From the analysis, it is shown that functionally graded properties can be successfully obtained by DLM of selected metallic powders with varying compositions.

• 한국컴퓨터정보학회논문지
• /
• 제7권3호
• /
• pp.143-148
• /
• 2002

ATM망에서는 예측할 수 없는 트래픽의 변화로 셀 지연과 셀 손실이 발생할 수 있으며 고속의 셀 전송 특성으로 인해 폭주가 발생할 수 있다. 따라서 트래픽 제어는 ATM 망에서 필수적이며, 폭주현상을 줄이기 위한 여러 가지 방법들 가운데 하나가 셀 쉐이핑이다. 본 논문에서는 리키버켓과 TJW로 구성된 셀 쉐이핑 기법을 연구한다. 셀 쉐이퍼는 시간 윈도우를 가진 TJW와 토큰 풀을 가진 리키버켓, 간격제어 버퍼로 구성된다. BONeS시뮬레이터에서 ON/OFF트래픽 소스 모델을 이용하여 제안한 셀 쉐이핑 기법의 성능을 평가한 결과, 패킷화된 음성 트래픽과 고속 트래픽 소스 모두 셀 간격이 평균 비트율에 수렴하여 제어되는 것을 관찰할 수 있었다.

• 전력전자학회논문지
• /
• 제24권1호
• /
• pp.49-55
• /
• 2019

This study proposes a robust control of a fin position servo system using the H-infinity loop-shaping method. The fin position control system has a proportional (P) position controller and a proportional-integral (PI) controller. In this work, the position control loop requires a wide bandwidth. No current control loop exists due to the compact design of the system. Hence, the controller parameters are difficult to determine using the traditional cascade design method. The $H_{\infty}$ controller design method is used to design the controller's gain to achieve good performance and robustness. First, the transfer function of the system, which can be divided into tunable and fixed parts, is derived. The tunable part includes the position P controller and speed PI controller. The fixed part includes the rest of the system. Second, the optimized controller parameters are calculated using Matlab $H_{\infty}$ controller design program. Finally, the system with optimized controller is tested by simulation and experiment. The control performance is satisfactory, and the $H_{\infty}$ controller design method is proven to be valid.

• 한국정보처리학회논문지
• /
• 제2권5호
• /
• pp.667-676
• /
• 1995

ATM 트래픽의 다중화시 셀 지연 변경(cell delay variance)에 의한 트래픽의 특성 변화로 인하여 셀밉집 현상과 셀 분산 현상이 발생된다. 이러한 현상들은 셀 스트림 의 버스티니스를 증가시키고 네트워크의 폭주 상태를 유발하게 된다. 따라서 입력 스 트림을 일정한 간격으로 네트워크나 트래픽 제어 기능으로 전송하는 트래픽 쉐이핑 기능이 필요하다. 기존 방법들의 대부분이 입력 트래픽을 동일한 특성을 갖는 트래픽 으로 간주하여 연구를 수행하였지만, 본 연구에서는 입력 트래픽을 손실과 지연의 관 점으로 트래픽 특성을 고려한 트래픽 쉐이핑 기법을 제안한다. 입력 트래픽의 특성을 고려한 쉐이핑 모델과 알고리즘을 제시하고 셀 지연 변경의 크기에 따른 트래픽 영향 을 연구한다. 제안된 기법을 가상 스케쥴링 기법(virtual scheduling algorithm)과 비교하여 쉐이핑 기법의 효율성을 평가한다. 실험 결과 제안된 기법이 지연에 민감한 트래픽인 경우 약 12%의 평균 지연의 감소와 손실에 민감한 트래픽인 경우 11%의 버 스티니스의 감소를 보였다.

• 한국의류산업학회지
• /
• 제21권2호
• /
• pp.220-230
• /
• 2019

The Fourth Industrial Revolution has increased studies on observing the cross section by overlapping the clothing worn using 3D human body data. However, there is a lack of studies on the effect of pressure clothing that contracts the shape of the human body. Therefore, this study objectively evaluated the shaping functionality of body shapers using 3D scan and 3D data. Two types of commercial body shapers were selected for this study. The nude body and body wearing body shapers were then scanned. A 3D program evaluated the shaping functionality by overlapping the nude state with the body wearing body shaper A and B respectively. As a result, it was found that the effect of body shapers could be adequately observed according to body parts. The smaller body shaper was shown to have superior shaping capability with the abdomen more affected. Analysis of the horizontal cross section indicated that the waist circumference decreased by 6 cm when wearing body shaper A and decreased by 12cm when wearing body shaper B. The volume of the waist part decreased by 8.6% when wearing body shaper A and by 20.4% when wearing body shaper B. Therefore, it is more effective to compare the objective shaping functionality by body parts using the overlapped 3D scanned data rather than using exterior evaluation or length measurement when wearing clothing that contracts the body shape.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2318-2325
• /
• 2011

The quality of float solution deeply influences the performance of CDGPS because the theories being used in the integer ambiguity resolution method are derived under the assumption of AWGN. But in real world, the properties of noises are far from AWGN, especially when multipath are concerned. It results in the bias in float solution which affects the success rate of integer ambiguity and the precision of position in CDGPS. This paper designs an augmented Kalman filter using shaping filter and Kalman filter for the performance improvement of CDGPS on multipath. The experimental results with real measurements show that the correct integer ambiguity is always found while the success rates of WLSQ and ordinary Kalman filter are 5% and 18%, respectively. Eventually, the position accuracy is also improved by using the proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1330-1333
• /
• 1997

In this paper, the optimal torque shaping is obtained for 3-axis rotation of a spacecraft. The true optimal 3-axis rotation of rigid spaeraft is first investigated via parameter optimization method with prescribed switching times. Input torque shape of the troque generating device mounted on the central hub is optimized using fourier Series expansion so that the spacecraft may slew while minimizing the vibration energy of flexible modes. Numerical results show that proposed method suggests a reference trahectory for open-loop control, and also verify that it can minimize the vibratory modes of the spacecraft during/after the rest-to-rest maneuver.

• International Journal of Control, Automation, and Systems
• /
• 제1권1호
• /
• pp.43-53
• /
• 2003

A modified command shaping control to reduce residual vibrations at a target position and to limit the sway angle of the payload during traveling for container crane systems is investigated. When the maneuvering time is minimized, a large transient amplitude and steady state oscillations may occur inherently. Since a large swing of the payload during the transfer is dangerous, the control objective is to transfer a payload to the desired place as quickly as possible while limiting the swing angle of the payload during the transfer. The conventional shapers have been enhanced by adding one more constraint to limit intermediate sway angles of the payload. The developed method is shown to be more effective than other conventional shapers for prevention of an excessive transient sway. Computer simulation results are provided.