• 한국항공운항학회지
• /
• 제30권4호
• /
• pp.57-64
• /
• 2022

A study on propllers for unmaned aerial vehicles is conducted using the open softwares. Since the shape of the propeller is closely related to the thurst characteristics of the propulsion system, adopting an appropriate propeller will significantly reflect stable aerodynamic performances. In this study, propellers for unmanned aerial vehicles were modeled by using OpenVSP and Propel for comparison, the thrust characteristics according to the number of blades and the diameter of the propeller were analyzed. In addition, the tendency of thrust characteristics according to various propeller pitch angles was confirmed. Based on the analysis results of this study, the applicability of the propeller shape to the design of the unmanned aerial vehicle was confirmed. It is shownthat the analysis results of this study can be utilized when modeling the propeller shape in research such as a conceptual design of unmanned aerial vehicle. In this case, it should be noted that OpenVSP does not involve the viscous effect of air.

• 한국자동차공학회논문집
• /
• 제17권4호
• /
• pp.101-107
• /
• 2009

Actuators using shape memory alloys use the one-way shape recovery stress. But when external load is applied the accumulated plastic strain induced by repeated deformation is the factor of generation of uncorrect recovery stress and unreliability. To solve this problem, two-way shape memory effect (TWSME) is considered. TWSME induced by plastic deformation have advantages including simple heating cycle without external force and enough recovery force for using actuators. but there is no research on cylinder-type or tube-type shape memory alloy actuators using two-way shape memory effect until now. Therefore in this study, characteristics of two-way shape memory effect is verified through the compression experiments using cylinder-type and tube-type specimens.

• 복식
• /
• 제44권
• /
• pp.57-75
• /
• 1999

The purpose of this study is to infer the shape and change as auspicious symbolic meaning and figures of a peony pattern. For this study. I analyzed the example of a peony pattern, which is traditional Chinese pattern appeared on a ceramic and textile. The results of this study are as following. First, a peony has particular title, such as 'the king of flowers' and 'the most beautiful woman in country and the smell in heaven' originated in a verse of a poet at Dang's Dynasty. It is reputed to be the best of all flowers, representing beauty, and a beauty. Second, the basic meaning of a peony pattern used as auspicious pattern is prosperity and it has various meanings of it's similar kind through several auspicious objects and combination. Also, it was used for the purpose of adequating the desire of man's blessing mentality. Third, four kinds of characteristics of a peony pattern are as following. 1) A peony pattern has similar shape with 'Bosanghwamoon', which was used as a pattern at formerly period of peony flowers. It was used as realistic shape gave vividness to the characteristic of peony on the shape of 'Bosanghwamoon'. 2) 8-petaled, unique leaves and veins were described in detail by vivid sketching shape of real peony flower. 3) Laying stress on the characteristics of peony flower, which is large and magnificent, several folds petals were described abundantly by exaggerated shape or a shape of big honeycomb. And unique leaves were described realistically on these. 4) It was also expressed peculiar characteristic of peony flower composed of several pieces by weakened design shape.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권2호
• /
• pp.263-276
• /
• 2013

Most yacht sails are made of thin fabric, and they have a cambered shape to generate lift force; however, their shape can be easily deformed by wind pressure. Deformation of the sail shape changes the flow characteristics over the sail, which in turn further deforms the sail shape. Therefore, fluid-structure interaction (FSI) analysis is applied for the precise evaluation or optimization of the sail design. In this study, fluid flow analyses are performed for the main sail of a 30-foot yacht, and the results are applied to loading conditions for structural analyses. By applying the supporting forces from the rig, such as the mast and boom-end outhaul, as boundary conditions for structural analysis, the deformed sail shape is identified. Both the flow analyses and the structural analyses are iteratively carried out for the deformed sail shape. A comparison of the flow characteristics and surface pressures over the deformed sail shape with those over the initial shape shows that a considerable difference exists between the two and that FSI analysis is suitable for application to sail design.

• 한국의상디자인학회지
• /
• 제21권2호
• /
• pp.95-108
• /
• 2019

This study aims to determine the characteristics of new senior women's torso shapes. The data was collected from the 7th Size Korea, which analyzed 412 women between the ages of 55-69. A factor analysis was performed based on 20 indices, including eight based on circumference, eight based on height and length measurements, and four based on torso flattening. The results of the factor analysis suggest five main factors: torso silhouette, longitudinal size of the body, torso flattening rate, abdominal shape, and posterior longitudinal size. The results of the cluster analysis suggest three overall types: Type 1 is the inverted triangular obese shape which is characterized by large breasts, small buttocks, a short height, and a forward-bending posture; Type 2 is the rectangular, slim shape which is characterized by a forward neck and a flat front and back of the torso, and is the most slender among the three types; Type 3 is the large rectangular, overall obese shape, which is characterized by a round shape with large breasts, waist, and buttocks, and a forward-bending posture with a protruding back, and this is the most obese type. According to the results of the cross-tabulation, women aged 55-59 showed no trend in body shape; women aged 60-64 showed an increases in the inverted triangular obese shape and the large rectangular, overall obese shape; women aged 65-69 showed an increase in the large rectangular, overall obese shape and a decrease in the rectangular slim shape. In summary, new senior women showed body shape characteristics of being short, more obese having, a bent over posture. As they grew older, the curves disappeared, and the body becomes rounder. The study found that variation in body shape exists among new senior women in the aged society.

• 한국정밀공학회지
• /
• 제24권3호
• /
• pp.76-83
• /
• 2007

The Taguchi method is applied to obtain the optimal design of an automotive pedal arm in consideration of the stiffness test specification. Design parameters are defined to describe shape of the pedal arm. Volume, maximum Von-Mises stress and maximum displacement of the pedal arm are established as the smaller-the-better characteristics. Optimal parameters are determined on the basis of the analyzed level averages of the characteristics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.293-296
• /
• 2002

This work presents the reconstruction of impact force produced by the collision between two elastic structures. The 2-DOF impactor was designed. The shape control of impact farce using correlations of the dynamic characteristics and impact force history between two elastic structures is accomplished. The effects of the relative motion between impactor and elastic structure on the impact force shape are studied. Reconstruction characteristics of impact force in cantilever beam are reviewed.

• 대한가정학회지
• /
• 제42권6호
• /
• pp.103-110
• /
• 2004

Among accessaries, headwear is important to protect one's face and head from the sun, wind and cold. This study was performed to provide fundamental data on college female students' head shape by classifying their head shapes and by analyzing the characteristics of each head shape in order to improve the fitness of headwear. The subjects were 193 Korean college female students. The subjects were directly measured anthropometrically and indirectly analyzed photo-graphically. By direct and indirect measurement, 5 factors were extracted through factor analysis and those factors comprised 76.34% of the total variance. 3 clusters as their head shape were categorized using 5 factor scores by cluster analysis. Type 1 was characterized by long head type and having smallest head thickness and head girth. Type 2 had average size and the most round-head type. Type 3 was characterized by short head type and the largest head thickness and head girth.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.976-980
• /
• 2004

This study has introduced how to make conducting shape memory polyurethane(CSMPu) as a possible application to smart actuators. Different from conventional polyurethane, CSMPu can have a high conductivity and then electric power supplies enough energy to deform. To prepare conducting polyurethane, carbon nanotubes were incorporated into shape memory polyurethane. Basic experiments to reveal its characteristics have been conducted for a development of actuators. From the results conducted in the present study, optimized conditions for the process of actuating deformation were found. Thermo-electric characteristics such as the relation between temperature and specific resistance and trend curves of resistance variations according to elongations were measured. These data provided a strong possibility of CSMPu as a smart actuator.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.49-58
• /
• 2003

In this study, the equation of motion of impacting elastic structures was derived through the theory, and the shape control of impact force using correlations of the dynamic characteristics and impact force history between two elastic structures was accomplished. Through numerical analysis and experiments, the classical contact mechanisms were verified, and the effects of the relative motion between impactor and elastic structure on the impact force shape were studied, and then the shape change of impact force depending on the impact position and mode shape of cantilever beam were analyzed. The 2-DOF impactor was designed and used. Reconstruction characteristics of impact force in cantilever beam were reviewed .