• Journal of the Korean Society for Nondestructive Testing
• /
• v.12 no.4
• /
• pp.9-17
• /
• 1993

Three types of piezoelectric sensors to detect acoustic emission signals were developed and characterized. Epicentral displacement and velocity of a plate to have infinite boundary were calculated by convolution between a Green's function and a simulated source time function to show parabolic rising characteristic. The sensor calibration system set up was composed of a steel plate, a glass capillary, an indentor and a load cell indicator The transient elastic signals were detected by the sensors. The results were compared with the theoretical results and Fast Fourier Transformed. As the results, the sensor fabricated using a disk shape of a piezoelectric PZT element showed resonant characteristics. The sensors fabricated using a conical shape PZT element and a PVDF polymer film showed the wide band characteristics for particle displacement and velocity, respectively. The calculated results showed good agreements with the transient responses in the cases of the wide band sensors and it was confirmed that the simulated source time function had been properly assumed.

• Journal of Environmental Science International
• /
• v.27 no.11
• /
• pp.1023-1028
• /
• 2018

Shape memory materials are widely used in high-tech industries. Although shape memory polymers have been developed, they have a disadvantage, only unidirectional resilience. Shape memory polymers with bi-directional recovery resilience have been actively studied. In this study, a bidirectional shape memory polyurethane was synthesized using poly(${\varepsilon}$-caprolactone) diol, methylene dicyclohexyl diisocyanate, and hydroxyethyl acrylate. The first physical curing occurred between hard segments and hydrogen bondings when the solution was dried. The second curing in acrylate groups was performed by UV exposure. A degree of curing was analyzed by infrared spectroscopy. The shape memory properties of 2 step-cured polyurethanes were investigated as a function of UV curing time.

• Communications for Statistical Applications and Methods
• /
• v.15 no.5
• /
• pp.675-685
• /
• 2008

This paper studies two sequential procedures to estimate a monotone convex function using $L_2$ monotonization and uniform convexification; one, denoted by FMSC, monotonizes the data first and then, convexifis the monotone estimate; the other, denoted by FCSM, first convexifies the data and then monotonizes the convex estimate. We show that two shape modifiers are not commutable and so does FMSC and FCSM. We compare them numerically in uniform error(UE) and integrated mean squared error(IMSE). The results show that FMSC has smaller uniform error(UE) and integrated mean squared error(IMSE) than those of FCSC.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.229-232
• /
• 2008

This study presents a numerical procedure to optimize the shape of stepped circular pin-fins to enhance turbulent heat transfer. The KRG method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer with shear stress transport turbulent model. The objective function is defined as a linear combination of heat transfer and friction loss related terms with a weighting factor. Ten training points are obtained by Latin Hypercube Sampling for two design variables. Optimum shape has been successfully obtained with the increased objective function.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.229-232
• /
• 2008

This study presents a numerical procedure to optimize the shape of stepped circular pin-fins to enhance turbulent heat transfer. The KRG method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer with shear stress transport turbulent model. The objective function is defined as a linear combination of heat transfer and friction loss related terms with a weighting factor. Ten training points are obtained by Latin Hypercube Sampling for two design variables. Optimum shape has been successfully obtained with the increased objective function.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.979-983
• /
• 2001

We develop a new method of simultaneous optimization of trajectory and shape of redundant flexible manipulators for collision-free utilizing the B-spline function and a mathematical programming method We adopt an approximate flexible manipulator model which consists of rigid bar elements and spring elements. We use B-spline function for determining the approximate trajectory and the expressions of the outline of obstacles. The used total performance index consists of 2 performance indices. The first is the driving energy, and the second is the trajectory deviation which is caused by the approximate modeling for the flexible manipulator. We design optimal collision-free trajectory of flexible manipulators by searching optimum positions of the control points for B-spline approximation which minimize the performance index subject to constraint condition for collision-free. Some examinations through numerical examples show the effectiveness of the method

• Journal of Animal Environmental Science
• /
• v.6 no.1
• /
• pp.15-22
• /
• 2000

A monitoring and the forecasting system for the swine delivery was developed using CCD camera multi-function board microphone and data-recorder equipped on a personal computer. For the swine delivery monitoring and forecasting factors four factors were selected such as genitalia swine body shape breast color and sound. Image of physical variation of body shape, shape and color of genitalia area and color of breast of pregnant sow were grabbed using the CCD color camera and multi-function board and variation of voice of pregnant sow was acquired using microphone and data recorder. Acquired information of image and voice were analyzed using a custom developed algorithm and program. The result of the forecasting efficiency of swine delivery was 89%, 71% and 100% using the variation of genitalia are the body shape and the voice of pregnant sow. respectively. The efficiency of image processing was 100% for the delivery detection when the piglet was delivered half of its body from genitalia of pregnant sow, The monitoring and forecasting system informed the estimated time of the delivery of swine to a farm manager immediately if an estimated and established time set by the farm manager was the same and/or the estimated time ws earlier than the established time and the system detected the delivery.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.11
• /
• pp.73-84
• /
• 1992

In this paper, an algorithm for recovering the 3-D shape from a single shaded image is proposed. In the proposed algorithm, by using the relation between the height and surface gradient (p, q), a set of linear equations is derived from the linearized reflectance function. Then the 3-D surface is recovered by employing the conjugate gradient technique. In order to improve the convergence speed of the solution, we also employ the hierarchical basis function and multiresolution images in the algorithm. A method for determining the regularization parameter, which is determined by trial and error in the conventional approach, is also introduced. In addition, the proposed algorithm attempts to recover the 3-D surface without requiring the boundary conditions, making it suitable for a real-time implementation. Simulation results for real image as well as synthetic image are provided to demonstrate the performance of the proposed algorithm.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.4
• /
• pp.359-372
• /
• 2000

Current CAD systems are good enough to be used as a tool to manipulate three-dimensional shapes. This is a very important capability to be owned by a design tool because a major portion of designers'activities is spent on the shape manipulation in the design detailing process. However, the whole design process involves a lot more than the, shape manipulation. Currently, these remaining tasks, mostly logical reasoning process for the function realization together with structure decomposition in the top-down manner, are processed in the designer's brain. To support the top-down functional design process of a mechanical product, a system integrating the functional, structural and geometrical aspects of a product design in a unified environment is presented. Using this system, a designer can perform function decomposition, structure decomposition, and geometry detailing, and function verification activities in parallel and the whole design process it modeled resultantly. Once the whole design process is modeled, any redesign task can be automatically performed with the verification of the desired functions.

• Journal of KIISE:Software and Applications
• /
• v.29 no.5
• /
• pp.311-318
• /
• 2002

In this paper, we propose an efficient method for recognizing pupils and lip in a human face. Pupils are detected by a cost function, which uses features based on the eye's shape and a relation between pupil and eyebrow. The inner boundary of lip is detected by weighted vectors based on lip's shape and on the difference of gray level between lip and face skin. These vectors extract four feature points of lip : the top of the upper lip, the bottom of the lower lip, and the two corners. The experiments have been performed for many images and show very encouraging result.