• 한국수소및신에너지학회논문집
• /
• 제19권6호
• /
• pp.545-551
• /
• 2008

Fe/$Al_2O_3$ composite granules were prepared by combining sol-gel/oil drop method. The shape of granules were mainly determined by composition and concentration of aluminum precursor. The composite granule with the lowest aluminum concentration was synthesized with 0.75M boehmite solution. The prepared granules were tested as a catalyst in the plug-flow reactor for Fischer-Tropsch synthesis. Before the reaction, catalysts were activated by hydrogen reduction and synthesis gas treatment. The activation conditions and aluminum concentration have affected catalytic performance significantly.

• 한국세라믹학회지
• /
• 제35권7호
• /
• pp.749-756
• /
• 1998

TiC-Ni and TiC-Ni-Mo cermet powders were produced by Self-propagating High temperature Synthesis (SHS) process. The cooling rate of synthesized powders were controlled by using the V-shaped copper jig and the carbide size decreased with increasing the cooling rate I. e decreasing the width of copper jig Round shape carbide particles were produced after SHS reaction in TiC-Ni as well as TiC-Ni-Mo powders. Local segregation of Mo rich phases was observed in SHS powder of TiC-Ni-Mo and the uneven dis-triobution of Mo promoted the faster growth rate of carbide particles during sintering compared to the same composition specimen with commercial TiC powder. Howogeneous microstructure of TiC-Ni-Mo cermet was obtained when the elemental Mo powder was mixed with the SHS powder of TiC-Ni.

• The Korean Journal of Ceramics
• /
• 제4권3호
• /
• pp.171-175
• /
• 1998

$Al_2O_3$-TiC composites were prepared from aluminum, titanium oxide, and carbon fibers by self-propagating high-temperature synthesis(SHS). After the SHS reaction, the TiC phase in the sample was found either fibrous or non-fibrous shape. The fraction of the fibrous TiC phase varied with the amount of $Al_2O_3$ diluent addition. The optimum amount of diluent to make fibrous carbide was determined to be 30%. The fibers were hollow inside and made of multiple grains with a composition of titanium carbide. The hollow fiber formation mechanism was suggested and discussed. The synthesized powders were consolidated to dense composites by hot pressing at $1750^{\circ}C$ under 30 MPa.

• 한국정밀공학회지
• /
• 제19권9호
• /
• pp.34-40
• /
• 2002

Machining accuracy is affected by quasi-static errors of machining center. Since machine errors have a direct influence upon both the surface finish and geometric shape of the finished workpiece, it is very important to measure the machine errors and to compensate these errors. The laser measurement method for identifying geometric errors of machine tool has the disadvantages such as high cost, long calibration time and usage of volumetric error synthesis model. Accordingly, this paper deals with analysis of the geometric errors of a machine tool using ball bar test without using complicated error synthesis model. Statistical analysis method was adopted in this paper for deriving geometric errors using hemispherical helix ball bar test. As a result of experiment, geometric errors of the vertical machining center are compensated by 88%.

• Macromolecular Research
• /
• 제16권2호
• /
• pp.85-102
• /
• 2008

The development of reliable synthetic routes to polymer nanomaterials with well-defined size and morphology is a critical research topic in contemporary materials science. The ability to generate nanometer-sized polymer materials can offer unprecedented, interesting insights into the physical and chemical properties of the corresponding materials. In addition, control over shape and geometry of polymer nanoparticles affords versatile polymer nanostructures, encompassing nanospheres, core-shell nanoparticles, hollow nanoparticles, nanorods/fibers, nanotubes, and nanoporous materials. This review summarizes a diverse range of synthetic methods (broadly, hard template synthesis, soft template synthesis, and template-free synthesis) for fabricating polymer nanomaterials. The basic concepts and significant issues with respect to the synthetic strategies and tools are briefly introduced, and the examples of some of the outstanding research are highlighted. Our aim is to present a comprehensive review of research activities that concentrate on fabrication of various kinds of polymer nanoparticles.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.122.1-122.1
• /
• 2007

• Bulletin of the Korean Chemical Society
• /
• 제32권11호
• /
• pp.4113-4116
• /
• 2011

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.138.1-138
• /
• 2002

• 한국세라믹학회지
• /
• 제43권2호
• /
• pp.126-130
• /
• 2006

Nano-sized hydroxyapatite (HAp) powders were synthesized by a microwave-hydrothermal method using $H_3PO_4\;and\;Ca(OH)_2$ as starting materials. The applied microwave powers and mole ratio of Ca/P were served as powerful factors in the synthesis of calcium phosphate. In the case of relatively low microwave power of 450 Wand Ca/P ratio of 1.57, the mixed calcium phosphate compounds were detected in the synthesized powders. But in the case of running at 550 Wand 1.67(Ca/P), the synthesized powder showed the monophase of HAp having two kinds of morphologies. One was a needle shape with $5\~15\;nm$ in width and $20\~50\;nm$ in length, and the other was a spherical shape of $10\~40\;nm$ in diameter.

• Journal of Radiation Protection and Research
• /
• 제10권1호
• /
• pp.29-40
• /
• 1985

The objectives of present study is to investigate genetic damage of radiation in mammalian male germ cell and. to establish available screening method for determining genetic hazard by radiation. Several methods were employed to measure the genetic damage of radiation as follows: Sperm head counts, frequency occurrence of sperm with abnormal head shape, fertility, activity of LDH-X, and the induction of unscheduled DNA synthesis (U.D.S.) in male mouse were performed with the passing of time after irradiation by making use of the sequence of event that occurs during spermatogenesis. Sperm head counts and activity of LDH-X in testes were gradually reduced by increased radiation dose and with the passing of the time after irradiation. Frequency occurrence of sperm with abnormal head shape, sterile period, and the induction of unscheduled DNA synthesis were increased by increased radiation dose. It is suggested that since germ cell is a direct reflection of genetic complement, the use of male germ cell is rapid and convenient method for measuring genetic damage by radiation.