• 한국멀티미디어학회논문지
• /
• 제17권10호
• /
• pp.1229-1238
• /
• 2014

Various 2D Shape deformation techniques has been presented recently. Concerning intuitive control of deformation, gradient domain 2D deformation techniques have an advantage over FFD(Free-form deformation) approaches, since they can deform objects with less control points. However, semantic shape properties such as thickness or length are difficult to handle in these approaches due to they treat the whole shape as a simple flat shape without structural meaning. In this paper, we propose a 2D shape deformation algorithm that deforms shapes using thin, deformable skeletal structure called freeform deformation axis (FDA). This concept separates the target shape and the deformable structure and thus enables user to manipulate shapes more intuitively.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.36-43
• /
• 1998

The purpose of study is to propose numerical assessment methods of lateral deformation shape under lateral loads for regular high-rise buildings. The normalized 1st mode shape is used to assess lateral deformation shape. The assessment method are mass participation factor, representative value by RMS, the mean value, median of the nomalized 1st mode shape. These methods are able to know a fundamental lateral deformation shape of the building and effects of interactive systems numerically. Generally the characteristics of normalized 1st mode shape for various models coincide with numerical assessment results.

• 복식문화연구
• /
• 제20권5호
• /
• pp.725-735
• /
• 2012

This study investigated the demand for functional clothing that compensates for the physical deformation of women due to aging. For this, the degree of perception of physical deformation at the new silver generation was examined. The demand for functional clothing that corrects body shape and posture according to differences in age and degree of perception was analyzed. Study participants(n=138) were women who ranged from 55 to 65 in age. Perception of physical deformation was investigated in the categories of deformation of body posture, cognition of joint pain, and deformation of body shape. Analysis results showed that cognition of joint pain was the largest of the three elements of body deformation, and each element had a high correlation between each other. Perception for degree of body deformation for women in their 50's and 60's was similar. These results show that changes in posture or body shape occur severely from the late 50's, and this appears as joint pain. The group with a high perception of posture deformation showed an especially high demand for functional clothing that corrects body shape and posture. The group with a high perception of body shape deformation had high demand for functional clothing that corrects body shape by lifting the hips and the breasts, and making the abdomen and waist slimmer. The results of this study show that women of the new silver generation are attuned to deformations in body shape and posture as well as joint pain beginning in their mid-fifties. There is a need to develop functional clothing to correct posture and body shape for the new silver generation women.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.865-868
• /
• 2002

This study investigated the shape deformation of ball projectile(5.56mn) under the low energy impact by the use of the drop weight impact tester. ball projectile(5.56mm) consisted of the copper face with a lead core. The impact conditions were changed with the variations of the mass and the drop height of the impact tup. Shape deformation of ball projectile(5.56mm) after low velocity impact was measured using a video microscope and CCD camera. The test result showed that impact energy by changing of drop height of the impact tup affected shape deformation of ball projectile(5.56mm). So, it is important to study the relativity between shape deformation of ball projectile(5.56mm) and ballistic protection of plate(such as hybrid composite laminates) under the high velocity impact.

• 한국CDE학회논문집
• /
• 제18권5호
• /
• pp.321-328
• /
• 2013

A method of designing a manufacturing shape of ship plate parts considering welding deformation is introduced. In this paper, the design shape of a bracket is deformed not by a thermoelastic method but by a pure geometric method. Deformation quantities are estimated based on data captured in the field and then a manufacturing design shape is obtained by deforming an original design shape by a geometric deformation method. The proposed method has been implemented and tested in the shipyard.

• Journal of Computing Science and Engineering
• /
• 제6권3호
• /
• pp.219-226
• /
• 2012

Recently, shape analysis of human organs has achieved much attention, owing to its potential to localize structural abnormalities. For a group-wise shape analysis, it is important to accurately restore the shape of a target structure in each subject and to build the inter-subject shape correspondences. To accomplish this, we propose a shape modeling method based on the Laplacian deformation framework. We deform a template model of a target structure in the segmented images while restoring subject-specific shape features by using Laplacian surface representation. In order to build the inter-subject shape correspondences, we implemented the progressive weighting scheme for adaptively controlling the rigidity parameter of the deformable model. This weighting scheme helps to preserve the relative distance between each point in the template model as much as possible during model deformation. This area-preserving deformation allows each point of the template model to be located at an anatomically consistent position in the target structure. Another advantage of our method is its application to human organs of non-spherical topology. We present the experiments for evaluating the robustness of shape modeling against large variations in shape and size with the synthetic sets of the second cervical vertebrae (C2), which has a complex shape with holes.

• 한국컴퓨터그래픽스학회논문지
• /
• 제18권4호
• /
• pp.1-8
• /
• 2012

본 논문에서는 평면 형상에 대해 국소적 형태를 보존하는 형상 변형 기법의 시각적 품질을 향상시키기 위한 개선된 형상 변형 에너지를 제안한다. 형상 변형 에너지는 대개 형상의 윤곽선 변형 품질을 유지하기 위해 라플라시안 좌표, 형상 내부의 변형 품질을 유지하기 위한 평균값 좌표와 간선 길이 제한조건, 사용자 지정 정점의 위치 제한조건 등으로 구성된다. 형상 변형 기법은 사용자 지정 정점의 위치가 변화할 때, 정의된 형상 변형 에너지의 변화를 최소화하는 비선형 최소자승 최적화 기법을 사용하여 다른 모든 정점의 위치를 계산할 수 있다. 그러나, 사용자 지정 정점의 위치가 빠르게 변화하면, 형상의 라플라시안 벡터의 크기와 간선의 방향에 큰 변화가 발생하여 변형 결과의 시각적 품질이 급격히 감소하는 현상이 발생한다. 본 논문에서는 라플라시안 벡터의 크기와 간선의 방향 변화를 제한할 수 있는 새로운 제한 조건을 사용한 개선된 형상 변형 에너지를 제시한다. 개선된 변형 에너지는 최적화 수행 시간이 근소하게 증가하지만, 형상의 윤곽과 내부에서 변형 오차를 크게 줄일 수 있어 시각적으로 우수한 변형 결과를 얻을 수 있다.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.82-87
• /
• 2017

This study investigates thermal deformation due to fan shape of a hair dryer. In this study, thermal analysis showed that the shape of an electric fan results in lower temperature than that of a sieve frame. Among the shapes of electric fans, the temperature change decreases as the number of wings decreases. As a result of thermal deformation, model 4 (sieve frame shape) showed increased change of deformation compared to models 1, 2, and 3 (with electric fan shapes). Thus, the model 1 dryer with the sieve frame shape is shown to have the least durability among models 1, 2, 3, and 4. It is thought that the analysis results of this study can be applied to durability improvement and safer design of hair dryers.

• Smart Structures and Systems
• /
• 제29권2호
• /
• pp.311-319
• /
• 2022

A model of plastic deformation of the shape memory alloys which describes dislocation slip at the microlevel is developed. A condition similar to the Schmid law was adopted for the determination of dislocation slip onset. A description of the interaction of plastic deformation and martensitic transformations by taking into account the densities of deformation defects is proposed. It is shown that the model can correctly describe the effect of plastic strain on the shape memory effect. The proposed model is also capable of describing the two-way shape memory effect.

• 한국컴퓨터그래픽스학회논문지
• /
• 제17권3호
• /
• pp.43-50
• /
• 2011

본 논문에서는 2차원 입력 형상에 대하여 계층 메쉬를 이용한 빠르고, 품질 저하가 적은 평면 형상변형 기법을 제시한다. 입력으로 주어진 2차원형상의 내부와 경계를 조밀하게 샘플링한 정점의 집합으로 구성된 형상 메쉬와, 입력 형상을 근사적으로 둘러싸는 형상 메쉬의 일부 정점으로 구성된 제어 메쉬를 구성한다. 이때, 형상 메쉬 정점은 제어 메쉬의 정점에 대한 평균값 좌표로 표현한다. 사용자의 형상 변형 입력에 대하여 기존의 비선형 최소자승법을 사용한 메쉬 최적화문제를 풀어 제어 메쉬 정점의 변형될 위치를 구하고, 형상 메쉬는 변형된 제어 메쉬의 정점으로부터 평균값 좌표를 이용하여 최종적인 형상의 변형을 빠르게 계산한다. 형상 메쉬는 입력 형상을 정확히 표현하기 위해 많은 수의 정점으로 구성되는 반면에 제어 메쉬는 상대적으로 적은 수의 정점으로 구성된다. 계산양이 많은 최적화 방법은 제어 메쉬에만 적용되기 때문에 전체 수행시간은 매우 빠르지만, 제어 메쉬의 품질저하에 따라 형상변형의 품질 또한 저하된다. 본 논문에서는 형상 변형의 결과를 조절하고 품질 저하를 보정하기 위해서 사용자 제한에 방위 제어를 포함시켜 형상변형의 강성도를 조절하는 방법을 제시한다. 실험적인 결과에 의하면 본 논문에서 제시한 방법은 비교적 적은 수의 정점을 사용하여 형상 변형의 수행속도가 빠르면서, 변형의 시각적인 품질은 부드럽게 유지된다. 본 논문의 결과는 휴대폰이나 타블렛 PC와 같이 계산속도가 느린 임베디드 시스템에서 형상 변형을 이용한 2차원 애니메이션 제작과 같은 응용문제에 효과적으로 사용될 수 있다.