• 복식문화연구
• /
• 제20권5호
• /
• pp.725-735
• /
• 2012

This study investigated the demand for functional clothing that compensates for the physical deformation of women due to aging. For this, the degree of perception of physical deformation at the new silver generation was examined. The demand for functional clothing that corrects body shape and posture according to differences in age and degree of perception was analyzed. Study participants(n=138) were women who ranged from 55 to 65 in age. Perception of physical deformation was investigated in the categories of deformation of body posture, cognition of joint pain, and deformation of body shape. Analysis results showed that cognition of joint pain was the largest of the three elements of body deformation, and each element had a high correlation between each other. Perception for degree of body deformation for women in their 50's and 60's was similar. These results show that changes in posture or body shape occur severely from the late 50's, and this appears as joint pain. The group with a high perception of posture deformation showed an especially high demand for functional clothing that corrects body shape and posture. The group with a high perception of body shape deformation had high demand for functional clothing that corrects body shape by lifting the hips and the breasts, and making the abdomen and waist slimmer. The results of this study show that women of the new silver generation are attuned to deformations in body shape and posture as well as joint pain beginning in their mid-fifties. There is a need to develop functional clothing to correct posture and body shape for the new silver generation women.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1684-1687
• /
• 1997

In this paper, a three-dimensional algorithm for the insulation design of the high-voltage equipment is presented. In general, the insulation design consists of two steps. They are electric field calculation and correction of the shape to be designed. In the proposed algorithm, the combination method of charge simulation and surface charge simulation is used to calculate the three-dimensional electric fields. As for the correction of the shape, indirect control provided by rational B-spline is more useful than direct control. The use of rational B-spline reduces in the number of design variables and garrantees the smooth curvature of the designed shape. The proposed algorithm is applied to the design of the shape of the shield ring which has been designed by the method of trial and error.

• 한국멀티미디어학회논문지
• /
• 제20권4호
• /
• pp.606-613
• /
• 2017

When the planar area is captured by the depth camera, the shape of the plane in the captured image has perspective projection distortion according to the position of the camera. We can correct the distorted image by the depth information in the plane in the captured area. Previous depth information based perspective distortion correction methods fail to satisfy the real-time property due to a large amount of computation. In this paper, we propose the method of applying the conversion table selectively by measuring the motion of the plane and performing the correction process by parallel processing for correcting perspective projection distortion. By appling the proposed method, the system for correcting perspective projection distortion correct the distorted image, whose resolution is 640x480, as 22.52ms per frame, so the proposed system satisfies the real-time property.

• 한국운동역학회지
• /
• 제25권4호
• /
• pp.423-429
• /
• 2015

Objective : The purpose of this study was to investigate the effects of a body alignment correction program on asymmetrically developed squash players. Method : 30 experienced squash players who showed asymmetric body development, after evaluation of moire topography contour line shape, were involved in the experiment. All of them were right-handed and had more than five years of experience playing squash. Variables of body composition, moire topography and EMG were statistically compared between pre- and post- application of the 12-week body alignment correction program. The program consisted of 10-minute, left-handed forehand and backhand drive movements and 36 minutes performing 12 different yoga postures. Results : First, the body alignment correction program showed significant effects on the total weight, body fat percentage, and body mass index of the participants. Second, a decrease of right side inclined angles and an increase of left side inclined angles might result in a higher left-right symmetry rate and a better left-right balance; however the data was not statistically significant. Third, the EMG left-right deviation of erector spinae and latissimus decreased and the erector spinae muscle was thought to be more essential for vertebral movement and left-right asymmetry correction. Conclusion : A body alignment correction program, including yoga and opposite side exercises, could reduce left-right asymmetry.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1266-1270
• /
• 2020

A code is developed to correct for the coincidence summing effect in detecting a voluminous gamma source, and this code is applied to a¹⁵²Eu standard source as a test case. The source is 1000 mL of liquid in a cylindrical shape. To calculate the coincidence summing effect, the cylindrical source is considered as 10(radial) × 8(height) sectional sources. For each sectional source, the peak efficiency and total efficiency are obtained by Monte Carlo simulation at each energy for 10 energies between 50 keV and 2000 keV. The efficiencies of each sector are then expressed as polynomials of gamma energy. To calculate the correction coefficients for the coincidence summing effect, the KORSUM code is used after modification. The magnitudes of correction are 4%-17% for the standard ¹⁵²Eu source measured in this study. The relative deviation of 4.7% before the coincidence correction is reduced to 0.8% after the correction is applied to the efficiency based on the measured gamma line. Hence, this study has shown that a new method has been developed that is applicable for correcting the coincidence effect in a voluminous source, and the method is applied to the measured data of a standard ¹⁵²Eu cylinder source.

• 한국콘텐츠학회논문지
• /
• 제3권1호
• /
• pp.14-20
• /
• 2003

문서 이미지 처리에서 텍스트 블록의 수평화 프로세스는 문서 인식 솔루션을 위한 전처리 단계로서 많은 연구가 진행되고 있다. 이 논문에서는 텍스트 이미지 블록의 직교각 속성과 형태 모멘트에 후프 변환을 적용하여 경사진 텍스트 블록을 원래 문서의 텍스트와 수평화된 텍스트 이미지로 변환하는 효율적인 방식을 제안한다. 실험을 통하여 제안된 방식의 비교 성능 결과를 보인다.

• Journal of Korean Neurosurgical Society
• /
• 제49권3호
• /
• pp.194-199
• /
• 2011

There is still debate over which method of the surgery is the most appropriate for the treatment of scaphocephalic infants. In addition, change in psychomotor development following these procedures is a very complex issue that has not yet been resolved. In this paper, the authors describe a surgical technique for immediate spontaneous shape correction of infantile scaphocephaly. There were significant differences between pre- and postoperative cephalic index. We also describe an improvement in the developmental quotient following surgery. Therefore, this expantile zigzag craniectomy should be recommended to correct for isolated sagittal craniosynostosis in infants.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.251-260
• /
• 2002

In the viscosity measurement of PIM feedstock, slip correction methods require a number of experiments and produce a high level of error. In this study, a rotational rheometer with a parallel-discs configuration having different surface roughness was tried to minimize the effect of the slip phenomenon. Disc surface was prepared in 3 different roughness conditions - a smooth and 2 roughened surfaces. Results with the roughened surfaces were compared with the results obtained with a slip correction method. Relationship between powder characteristics such as size and shape and a surface roughness of the disc was examined for feedstock of 4 different powders with a same binder. As results, the effect of the slip phenomenon could be sufficiently minimized on the roughened surface in most cases. However, the effect of the slip phenomenon could not be sufficiently minimized for feedstock of a round-particular-shape powder and in the case of very narrow gap size.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권4호
• /
• pp.249-255
• /
• 2014

We present a simple method to watermark three-dimensional (3D) triangular meshes that have been generated from the depth data of the Kinect sensor. In contrast to previous methods, which maintain the shape of 3D triangular meshes and decide the embedding place, requiring calculations of vertices and their neighbors, our method is based on selecting one of the coordinate axes. To maintain shape, we use discrete wavelet transform and constant regularization. We know that the watermarking system needs the information to be embedded; we used a text to provide that information. We used geometry attacks such as rotation, scales, and translation, to test the performance of this watermarking system. Performance parameters in this paper include the vertices error rate (VER) and bit error rate (BER). The results from the VER and BER indicate that using a correction term before the extraction process makes our system robust to geometry attacks.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.53-61
• /
• 1999

STL has several errors such as orientation error, hole error, and acute triangle error on being translated from CAD software. These errors should be corrected before using in Rapid Prototyping. So the software is necessary to correct errors. In this study, STL Editor which is a system for STL error correction and shape modification is developed and contains following characteristics. 1.Apply the triangle based data st겨cture. 2.Use the graphic user interface for easy work. 3.Use the Diet method to reduce data size. 4.Use the Delaunay triangulation method to enhance the quality of STL. 5.Modify the STL errors manually.