• Journal of the Korean earth science society
• /
• v.30 no.4
• /
• pp.454-463
• /
• 2009

In this study, from January 2006 to February 2009, we observed 107 ice spikes formed in a natural state, and analyzed their environment. We developed an experimental device to reproduce ice spikes in laboratory and successfully made 531 ice spikes. We analyzed the process of the formation and the principle of how those ice spikes grow through videotaped data of the formation in the experiment. In the natural world, when the surface of water and the lower part of a vessel begin to freeze, a vent (breathing hole) develops at the surface where an ice is not frozen; this vent serves as the seed of an ice spike. It is assumed that the volume expansion of ice in the vessel which occurs when water freezes makes the supercooled water go upward through the vent and becomes an ice bar called an ice spike. In the laboratory, however, when distilled water is poured into an ice tray cube and kept in the experimental device for about one and a half hours at a temperature of -12- $-13^{\circ}C$, a thin layer of ice then begins to develop on the surface of the water, the vent is formed, and ice spikes form for about 10-30 minutes. These spikes stop growing when the end becomes clogged. Ice spikes can be described as falling into seven categories of shape, with the apex type topping the list followed by the slant type in the natural state and the vertical type predominating in the laboratory.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.25-31
• /
• 2018

In this study, the Controlled Low Strength Material (CLSM) was investigated to utilize the bottom ash and fly ash generated in the Circulating Fluidized Bed Combustor (CFBC). It was confirmed that the CFBC fly ash (CFBC-F) and CFBC bottom ash (CFBC-B) had an irregular particle shape through SEM measurement. According to the results of the hazard analysis, it was also confirmed that they were environmentally safe. In the case of mixing with CFBC-F, the unit quantity was increased. Regarding the rate of change of length, shrinkage in the range of -0.05~0.50% occurred in the air dry curing condition and expansion in the range of 0.1~0.6% in the sealed curing condition. Compressive strength was increased in the sealed curing condition compared to the air dry curing condition because there was enough moisture for hydration reaction in the long term. Therefore, the results of this study are likely be used as basic research data of mine filler materials.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.3
• /
• pp.533-545
• /
• 2014

Farmers' perception on actual raising conditions and breeding improvement for Hanwoo were surveyed and analyzed in order to utilize such data as basic resources for further development of courses of Hanwoo improvement and instructions on raising techniques. The survey was held based on Hanwoo farmers in Gyeongbuk region and the results for the analysis were as follow. Candidate cattle for breeding was selected in consideration of 'appearance, body shape, and pedigree-registration' (39.0%) and 'artificial insemination' (38.6%) was the most frequently used breeding method for the breeding cattle. 'Body length' was revealed to be the most considered factor while purchasing fattening calves and the castration for the fattening calves were mostly performed when '6~7 months after the birth'. The farmers also responded that they 'try to comply with over 80% of items specified in program for production of high quality beef' in order to produce high quality beef. However, the farmers believed that '12 months after the birth' was the most economic market month. Although the results differed by each items surveyed, majority of those results showed statistically significant differences with significance level of 0.05 upon the surveyees' general characteristics and demographic factors including level of education, age, occupation, and family man power. Most surveyees responded 'around 30% of shipping heads' (22.1%) for the prevalence of beef graded better than 1++ grade when shipping, however, no significant differences in between general characteristics of surveyees were observed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.307-312
• /
• 2017

Laser cladding has some advantages compared to conventional cladding technologies such as arc welding and thermal spraying. Laser cladding produces a metallurgically well-bonded clad layer with a lower dilution ratio and few defects. Based on the characteristics of a 1-pass clad layer with many parameters, which were investigated in a previous report, it was found that it was essential to overlap a 1-pass clad layer when cladding a large area. In this study, the shape differences of multi-pass clad layers with various overlapping ratios were compared. Then, the alloying element distribution of cladding with a certain overlapping ratio was investigated using EDS and EPMA. As the overlapping ratio increased, the length of the clad decreased and its height increased. In addition, the height of the multi-pass cladding was higher than that of the 1-pass cladding under the same condition. The Fe content of the highly diluted first clad was found to be approximately 20 % in an element analysis. However in the area outside of the first clad, the Fe content was decreased to 10 % as a result of minimum dilution, and a uniform distribution of elements was found.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.8-15
• /
• 2016

The purpose of this study is to design a model with the structural stability so as not to lose the operational function due to structural plastic or fail of a sliding blast door by blast pressure to this aim, a numerical simulation was performed using full-size experiments and M&S (Modeling & Simulation) of the sliding blast door. The sliding blast door ($W3,000{\times}H2,500mm$) under the blast load is in the form of a sliding type 2-way metal grill, which was applied by a design blast pressure (reflected pressure $P_r$) of 17 bar. According to the experimental results of a real sliding blast door under blast load, the blast pressure reached the sliding blast door approximately 4.3 ms after the explosion and lasted about 4.0 ms thereafter. The maximum blast pressure($P_r$) was 347.7 psi (2,397.3 kPa), it is similar to the UFC 3-340-02 of Parameter(91 %). In addition, operation inspection that was conducted for the sliding blast door after real test showed a problem of losing the door opening function, which was because of the fail of the Reversal Bolt that was installed to prevent the shock due to rebound of the blast door from the blast pressure. According to the reproduction of the experiment through M&S by applying the blast pressure measurement value of the full-size experiments, the sliding blast door showed a similar result to the full-size experiment in that the reversal bolt part failed to lose the function. In addition, as the pressure is concentrated on the failed reversal bolt, the Principal Tensile Failure Stress was exceeded in only 1.25 ms after the explosion, and the reversal bolt completely failed after 5.4 ms. Based on the result of the failed reversal bolt through the full-size experiment and M&S, the shape and size of the bolts were changed to re-design the M&S and re-analyze the sliding blast door. According to the M&S re-analysis result when the reversal bolt was designed in a square of 25 mm ($625mm^2$), the maximum pressure that the reversal bolt receives showed 81% of the principal tensile failure stress of the material, in plastic stage before fail.

• The KIPS Transactions:PartA
• /
• v.11A no.5
• /
• pp.391-400
• /
• 2004

Within multimodal medical image registration techniques, which correlate different images and Provide integrated information, surface registration methods generally minimize the surface distance between two modalities. However, the features of two modalities acquired from one subject are similar. So, it can improve the accuracy of registration result to match two images based on optimization of both surface distance and shape feature. This research proposes a registration method which optimizes surface distance and surface curvature of two brain modalities. The registration process has two steps. First, surface information is extracted from the reference images and the test images. Next, the optimization process is performed. In the former step, the surface boundaries of regions of interest are extracted from the two modalities. And for the boundary of reference volume image, distance map and curvature map are generated. In the optimization step, a transformation minimizing both surface distance and surface curvature difference is determined by a cost function referring to the distance map and curvature map. The applying of the result transformation makes test volume be registered to reference volume. The suggested cost function makes possible a more robust and accurate registration result than that of the cost function using the surface distance only. Also, this research provides an efficient means for image analysis through volume visualization of the registration result.

• Journal of Intelligence and Information Systems
• /
• v.13 no.1
• /
• pp.15-27
• /
• 2007

In Korea, hepatoma is the thirdly frequent cause of death from cancer occupying 17.2% among the whole deaths from cancer and the rate of death from hepatoma comes to about 21's persons per one-hundred thousand ones. This paper proposes an automatic method for the extraction of areas being suspicious as hepatoma from a CT scan and evaluates the availability as an auxiliary tool for the diagnosis of hepatoma. For detecting tumors in the internal of the liver from CT scans, first, an area of the liver is extracted from about $45{\sim}50's$ CT scans obtained by scanning in 2.5-mm intervals starting from the lower part of the chest. In the extraction of an area of the liver, after unconcerned areas outside of the ribs being removed, areas of the internal organs are separated and enlarged by using intensity information of the CT scan. The area of the liver is extracted among separated areas by using information on position and morphology of the liver. Since hepatoma is a hypervascular turner, the area corresponding to hepatoma appears more brightly than the surroundings in contrast-enhancement CT scans, and when hepatoma shows expansile growth, the area has a spherical shape. So, for the extraction of areas of hepatoma, areas being brighter than the surroundings and globe-shaped are selected as candidate ones in an area of the liver, and then, areas appearing at the same position in successive CT scans among the candidates are discriminated as hepatoma. For the performance evaluation of the proposed method, experiment results obtained by applying the proposed method to CT scans were compared with the diagnoses by radiologists. The evaluation results showed that all areas of the liver and liver tumors were extracted exactly and the proposed method has a high availability as an auxiliary diagnosis tools for the discrimination of liver tumors.

• Journal of the Korean Institute of Gas
• /
• v.2 no.2
• /
• pp.18-25
• /
• 1998

According to the requirements of ANSI B3l.8, the pipe thickness is determined with hoop stress resulted from internal pressure. And the other loads induced by soil, vehicle, thermal expansion, ground subsidence, etc shall be evaluated rationally. There are two ways of calculating stress of buried gas pipeline. The first is FEM. FEM can calculate the stress regardless of the complexity of pipeline shape and boundary conditions. But it needs high cost and long time. The second is the way to use equation. The reliable equations to calculate the stress of buried gas pipeline was developed and have been used in designing pipeline and evaluating pipeline safety, But these equation are very difficult to understand and use for non-specialist. For easy calculation of non-specialist, the new computer program to calculate stress of buried natural gas pipeline have been developed. The stress is calculated by the equations and extrapolation of the graph resulted from FEM. The full paper is consist of series I and II. In this paper, series I, the calculating equation of the program is explained in detail.

• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.201-214
• /
• 2006

To study the relationship between rainfall conditions and landslides according to a geological condition in land-slides areas such asJangheung Kyounggi, Sangju and Pohang Kyoungbuk, the data of rainfall and landslides are investigated and analyzed. Many landslides occurred at these areas because of the heavy rainfall in two or four days of the summer 1998. The data of rainfall are collected in observatories within a 50km radius from landslides occurrence areas, and the data of landslides are investigated directly in landslides areas. The data of rainfall are the accumulative rainfall and the rainfall intensity, and the data of landslides are the occurrence frequency considering the geological condition. These data are analyzed statistically to know the relationship the rainfall and landslides. The landslides are concentrated in the heavy rainfall area from the analysis of these data. It knows that the land-slides are triggered by the heavy rainfall. Meanwhile, the rainfall factors such as the accumulative rainfall, the rain-fall intensity and the dropping time are different in each landslides area, and the shape and frequency of landslides are different respectively. The landslides have occurred in the area of high accumulative rainfall, while the land-slides have not occurred around that area. Therefore, the rainfall is very important factor induced by the landslides, and the accumulative rainfall is really related to the frequency of landslides.

• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.368-376
• /
• 1999

This paper predicts the changes in the spring constant, the resonant frequency, the electrostatic force, and the displacement of a resonant structure due to non-ideal anisotropic RIE etching process. First, a $6\;{\mu}m$ thick polysilicon was etched by RIE and the anisotropy of the etched structure was measured as a function of a RF power, a $Cl_2$ flow rate and a chamber pressure. In the experimental results, an anisotropy was decreased as the RF power, the $Cl_2$ flow rate, or the chamber pressure was increased. A comb actuator's operation characteristic was predicted depending on the anisotropy variations in RIE etching. Comb actuators with three different support beam structures were investigated : fixed-fixed, crab-leg, and double crab-leg. As the RIE etch anisotropy becomes non-ideal, i.e. the cross section becomes rather a trapezoidal than a rectangular shape, it decreases spring constant, resonant frequency and electrostatic force of a comb actuator but it increases the displacement of the mass. Among the three structures, the comb actuator with double crab-leg support beams is more influenced by anisotropy variation in RIE etch than other two.