• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.497-506
• /
• 2013

The optimal condition for the torrefaction of eucalyptus (Eucalyptus globulus) was investigated by response surface methodology. The carbon content in the torrefied biomass increased with the severity factor (SF), while hydrogen and oxygen contents decreased. The calorific value of torrefied biomass ranged from 20.23 to 21.29 MJ/kg, depending on the torrefaction conditions. This implied that the energy contained in the torrefied biomass increased by 1.6 to 6.9%, when compared with that of the untreated biomass. The weight loss of biomass increased as the SF increased. The Code level of reaction temperature had the highest impact on the energy yield of torrefied biomass, while the effect of Code level of reaction time was considerably low. The highest energy yield was obtained at low SF.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.21-26
• /
• 2020

In this paper, we investigated the characteristics of SF-MPAA depend on the structures of radiators when they were embroidered for realizing embroidered SF-MPAA. As increasing pitches by decreasing numbers of grids in length-direction and width-direction of the embroidered radiator the antenna gain and resonance frequency were trendingly decreased. However the characteristics of antenna were affected very much by the pitch in width-direction but affected relatively less by the pitch in length-direction. Therefore it was beneficial to decrease number of grids in length-direction to decrease conductor ratio. SLL was affected by the combination of length-direction pitch and width-direction pitch. The conductor ratio of embroidered radiator was determined by the ratio of pitch to embroidered thread thickness. When the ratio was less than 5 the conductor ratio was decreased rapidly. But when the ratio was larger than 5 the conductor ratio was decreased slowly and saturated.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.2
• /
• pp.191-195
• /
• 2012

Heavy flint optical glass(SF57HHT) is new material that has extremely high transmittance. Due to brittleness and high hardness, optical glass is one of the most difficult to materials for ultra-precision turning. According to the hypothesis of ductile machining, all materials, regardless of their hardness and brittleness, will undergo transition from brittle to ductile machining region below critical undefromed chip thickness. In this study, cutting test was carried out to evaluate cutting performance of heavy flint glass using ultra-precision machine with single crystal diamond bite. The machined workpiece surface topography, tool wear and surface roughness were examined using AFM and SEM. The experimental results indicate that the machining mode become the brittle mode to ductile mode, when the maximum undeformed chip thinkness is large than critical value. Tool wear mainly occurs on the flank face and its wear mechanism is dominated by abrasion. This study demonstrates the feasibility of SF57HHT by diamond turning.

• Journal of fish pathology
• /
• v.7 no.1
• /
• pp.37-46
• /
• 1994

A total 103 strains of Edwardsiella tarda was isolated from eel culture-ponds and examined for drug resistance, distribution and transferabilities of R plasmids. The drugs used were lincomycin(LM), penicillin(PM), sulfamethazine(SF), sulfadimethoxine(SD), cephalosprin(CP), chloramphenicol(CH), streptomycin(SM), oxytetracycline(OT), ampicillin(AP), oxolinic acid(OA), kanamycin(KM), amikacin(AK), gentamicin(GM) and enrofloxacin(EF). Two strains were resistant to the all drugs used, and all isolates were multiply resistant to drugs(at least 8 among 14 drugs), mostly restricted to LM(103 strains), PM(103 strains), SD(103 strains), SF(103 strains), CP(102 strains), CM(101 strains), SM(100 strains), OT(94 strains), AM(92 strains), OA(80 strains), KM(60 strains), AK(30 strains), GM(19 strains) and EF(14 strains), in combination at high degree showing 34 different drug resistant patterns. The most frequently encountered patterns were LM PM SD SF CP CH SM OT AP OA KM(22 strains, 22.4%) followed by LM PM SD SF CP CH SM OT AP OT(12 strains, 11.7%). LM PM SD SF CP CH SM OT AP(7 strains, 6.8%), LM PM SD SF CP CH SM OT AP OA KM AK GM(6 strains, 5.8%) and LM PM SD SF CP CH SM OT AM OX KM AK GM(6 strains, 5.8%). Transfer experiment of drug resistance showed that of 103 resistant strains, 100 strains(97%) transferred part or all resistance to all drugs, indicating that most isolates carried conjugally transferrable R plasmids determining multiple drugs. The most frequently observed transferarble R plasmids were LM PM SD SF CP CH SM OT AP OA(10 strains), LM PM SD SF CP CH SM OT AP OX KM(7 strains) and LM PM SD SF CP CH AP OA(7 strains). These results sugested that eel culture-ponds were highly contaminated with different strains of Edwardsiella tarda, and that contaminated bacteria might be highly multiple resistant strains to drugs, carring transferable R plasmids.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.3
• /
• pp.361-364
• /
• 1999

The binding characteristics of Anagrapha falcifera nuclear polyhedrosis virus (AtNPV) to Spodoptera frugiperda 21 (Sf21) cells were investigated. The cells displayed an affinity of 4.7×10/sup 10/M/sup -1/ with about 3,300 binding sites per cell. The biochemical nature of the AfNPV-binding sites on the cell surface was also partially identified. Our findings suggest that the binding-site moiety has a glycoprotein component, but that the direct involvement of oligosacccharides containing N-acetylglucosamine or sialic acid residues in binding is unlikely, and that AfNPV entry into Sf21 cells may be via receptor-mediated endocytosis.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.230-234
• /
• 2011

High density plasma etching of ZnO film was performed in $CF_4$/Ar and $SF_6$/Ar inductively coupled plasmas. Maximum etch rates of ~1950 ${\AA}$/min and ~1400 ${\AA}$/min were obtained for $10CF_4$/5Ar and $10SF_6$/5Ar ICP discharges, respectively. The etched ZnO surfaces showed better RMS roughness values than the unetched control sample under most of the conditions examined. In the $10CF_4$/5Ar ICP discharges, very high etch selectivities were obtained for ZnO over Ni (max. 11) while Al showed etch selectivities in the range of 1.6~4.7 to ZnO.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.5
• /
• pp.96-100
• /
• 2009

With the improvement of industrial society, the high quality electrical energy, simplification of operation and maintenance, ensuring reliability and safety are being required. This paper compares breakdown characteristics in $SF_6$ gas with $N_2/O_2$ Mixture gas($N_2:O_2=100$ : 0, 79 : 21, 60 : 40, 40 : 60) as using widely in High Voltage insulation equipment with the characteristics in different media which are focused on environmentally friendly gases. As an append result of research the results are fundamental data for electric insulation design of Distribution Power Facilities which will be studied and developed in the future. And we could make an environment friendly gas insulation material with mataining dielectric strength by $N_2/O_2$ Mixture gas which generates a lower lever of the global warming effect.

• Research in Community and Public Health Nursing
• /
• v.31 no.4
• /
• pp.416-426
• /
• 2020

Purpose: The aim of this study was to evaluate the validity and reliability of the Korean version of Short-form Health Literacy Scale (HLS-SF-K12) for Adults. Methods: The English HLS-SF12 was translated into Korean with forward and backward translation. Survey data were collected from 204 adults who visited two hospitals in Korea. Content validity, construct validity, and known-groups validity were evaluated. Cronbach's α for internal consistency and test-retest were used to assess reliability. SPSS 21.0 and AMOS 21.0 software were used for data analysis. Results: The HLS-SF-K12 was composed of 12 items, and three subscales (health care, disease prevention, and health promotion). The instrument explained reliable internal consistency with Cronbach's α for the total scale of .89, and .74~.81 for subscales. The model of three subscales for the HLS-SF-K12 was validated by confirmatory factor analysis (Normed χ2=2.14 (p<.001), GFI=.92, RMR=.04, RMSEA=.08, CFI=.94, TLI=.92, IFI=.94). The hypothesis testing which analyzed the differences in health literacy by age and education level was satisfied. Conclusion: The HLS-SF-K12 is a valid and reliable instrument for measuring health information comprehension for adults in Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.1
• /
• pp.69-78
• /
• 2015

A non-traditional forage-based protocol was employed to evaluate replacement heifer growth, fertility, and economics between small frame (SF, 3.50; n = 50) and large frame (LF, 5.56; n = 50) heifers using three increasing gain growth phases. Preceding an 85 d growing-breeding period (Phase 3; P3) the heifers were managed as a common group for Phases 1 and 2 (P1 and P2). During P1, heifers grazed common fields of unharvested corn and corn residue (total digestible nutrients [TDN] 56%) with supplemental hay. For P2, heifers grazed early spring crested wheatgrass pasture (CWG; TDN 62%) that was followed by the final P3 drylot growing and breeding period (TDN 68%). Small frame heifers were lighter at the end of P1 in May and at the start of P3 breeding in August (p = 0.0002). Percent of mature body weight (BW) at the end of P1 (209 d) was 48.7% and 46.8%, respectively, for the SF and LF heifers and the percent pubertal was lower for SF than for LF heifers (18.0% vs 40.0%; p = 0.02). At breeding initiation (P3), the percentage of mature BW was 57.8 and 57.2 and the percentage pubertal was 90.0 and 96.0 (p = 0.07) for the SF and LF heifers, respectively; a 5-fold increase for SF heifers. Breeding cycle pregnancy on days 21, 42, and 63, and total percent pregnant did not differ (p>0.10). In drylot, SF heifer dry matter intake (DMI) was 20.1% less (p = 0.001) and feed cost/d was 20.3% lower (p = 0.001), but feed cost/kg of gain did not differ between SF and LF heifers (p = 0.41). Economically important live animal measurements for muscling were measured in May and at the end of the study in October. SF heifers had greater L. dorsi muscle area per unit of BW than LF heifers (p = 0.03). Small frame heifer value was lower at weaning (p = 0.005) and the non-pregnant ending heifer value was lower for SF heifers than for the LF heifers (p = 0.005). However, the total development cost was lower for SF heifers (p = 0.001) and the net cost per pregnant heifer, after accounting for the sale of non-pregnant heifers, was lower for SF heifers (p = 0.004). These data suggest that high breeding efficiency can be attained among March-April born SF and LF virgin heifers when transitioned to a more favorable May-June calving period through the strategic use of grazed and harvested forages resulting in a lower net cost per pregnant SF heifer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.672-681
• /
• 2018

This study was conducted to test the validity and reliability of the Korean version of the Professional Quality of Life Scale-Short Form (ProQOL-K-SF). Survey data were collected from 191 staff involved in long-term care insurance who worked for National Health Insurance Services. Construct validity using exploratory factor analysis and the internal consistency reliability were determined using SPSS/WIN (21.0). Factor analysis of the ProQOL-K-SF demonstrated that it has a two-factor structure (compassion satisfaction and compassion fatigues) and 13 items that support construct validity. Factor loadings of the compassion satisfaction ranged from 0.70-0.86, factor loading of the compassion fatigues ranged from 0.71-0.82 and the total variance was 60%. The ProQOL-K showed interanal consistency based on Cronbach's ${\alpha}$, with a total scale and two sub scale values of 0.76-0.90. Compassion fatigue and compassion satisfaction of 30 items of the ProQOL-K were positively correlated with those of 13 items of the ProQOL-K-SF. The results support that the ProQOL-K has satisfactory construct validity and is a reliable measure of professional quality of life in Korea.