• Journal of the Korea Society of Computer and Information
• /
• v.8 no.4
• /
• pp.138-147
• /
• 2003

There are some problems of current internet protocols to support the mobility of terminal in wireless environments. The mobile IP has come out to solve these problems, but there exists some problems like triangle routing, the need of each host's home address and the management of tunneling. Also. real-time multimedia traffics require fast hand-off, low latency and the utilization ratio of high bandwidth. SIP can support the mobility of wireless terminal and is widely accepted as the protocol which can support multimedia service and call setup in next generation network. In this paper, the framework of SIP system will be designed and implemented to support the mobility of wireless terminal by using JAIN API which follow the standards of next generation network and this system matches the standards of next generation network.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.120-129
• /
• 2002

An integrated structure and controller design approach for rotating cantilever beam is presented. An optimization method is developed for improving positioning performance considering the elastic deformations during high speed rotation and adopting the beam shape and the control gains as design variables. For this end, a dynamic model is setup by the finite element method according to the shape of the beam. The mass and stiffness of the beam are distributed in such a way that the closed-loop poles of the control system should be located leftmost in the complex s-plane. For optimization method, the simulated annealing method is employed which has higher probability to find the global minimum than the gradient-based down-hill methods. Sequential design and simultaneous design methods are proposed to obtain the optimal shape and controller. Simulations are performed with new designs by the two methods to verify the effectiveness of the approach and the results show that the settling time is improved for point-to-point position controls.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.6
• /
• pp.802-810
• /
• 1998

The purpose of this study is to find the analytic solution of determining the optimal capacity of processes and storages to meet the product demand. Recent trend to reduce product delivery time and to provide high quality product to customer requires the increasing capacity of storage facilities. However, the cost of constructing and operating storage facilities is becoming substantial because of increasing land value, environmental and safety concern. Therefore, reasonable decision making about the capacity of processes and storages is important subject for industries. The industrial solution for this subject is to use the classical economic lot sizing method, EOQ(Economic Order Quantity) model, trimmed with practical experience but the unrealistic assumption of EOQ model is not suitable for the chemical plant design with highly interlinked processes and storages. This study, a first systematic attempt for this subject, clearly overcomes the limitation of classical lot sizing method. The superstructure of the plant consists of the network of serially and/or parallelly interlinked processes and storages. A novel production and inventory analysis method, PSW(Periodic Square Wave) model, is applied. The objective function of optimization is minimizing the total cost composed of setup and inventory holding cost. The advantage of PSW model comes from the fact that the model provide a set of simple analytic solution in spite of realistic description of material flow between process and storage. The resulting simple analytic solution can greatly enhance the proper and quick investment decision for the preliminary plant design confronting diverse economic situation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.6
• /
• pp.563-568
• /
• 2013

The purpose of this study is to find the analytic solution for determining the optimal capacity (lot-size) of a batch-storage network to meet the finished product demand under infrequent shutdowns. Batch processes are bound to experience random but infrequent operating time losses. Two common remedies for these failures are duplicating another process or increasing the process and storage capacity, both of which are very costly in modern manufacturing systems. An optimization model minimizing the total cost composed of setup and inventory holding costs as well as the capital costs of constructing processes and storage units is pursued with the framework of a batch-storage network of which flows are susceptible to infrequent shutdowns. The superstructure of the plant consists of a network of serially and/or parallel interlinked batch processes and storage units. The processes transform a set of feedstock materials into another set of products with constant conversion factors.A novel production and inventory analysis method, the PSW (Periodic Square Wave) model, is applied. The advantage of the PSW model stems from the fact it provides a set of simple analytic solutions in spite of a realistic description of the material flow between processes and storage units. The resulting simple analytic solution can greatly enhance a proper and quick investment decision at the early plant design stagewhen confronted with diverse economic situations.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.369-376
• /
• 2018

This paper presents an android-based implementation of real-time remote monitoring system for industrial gas turbines. The use of remote monitoring techniques can be beneficial in terms of not only the reduction of monitoring cost but also the earlier detection of abnormal status. In order to achieve the ability of protecting sensitive information from unauthorized persons, the proposed system supports secure transmissions using the RSA(Rivest Shamir Adleman) algorithm. In the event of abnormal situation on the gas turbine, the remote monitoring system generates an alarm to attract the user's attention by exploiting a push-message technique. The proposed system has been verified through a series of experiments with an experimental setup including a virtual data generator.

• Korean Journal of Occupational Health Nursing
• /
• v.29 no.1
• /
• pp.8-19
• /
• 2020

Purpose: To identify the importance and performance levels of health management duties, work-related and general attributes of health managers in medical institutions and analyze their impact on the performance of managing health-care related tasks. Methods: This research identified the performance levels of 150 health managers who have been executing industrial health-related duties for more than six months as nurses in medical institutions with more than 30 hospital beds. The variables which affect their performances were then analyzed. Results: The average importance of health care duties was 8.1 out of 10 and 5.5 for performance levels. Multi-regression analysis on the variables affecting performance levels of health managers in medical institutions showed that health managers exhibit higher numbers under the following conditions: over 300 full-time employees, more than 1 year but less than 3 years of experience, positions above section chief level, affiliation to the safety and health department, and high perception of duty importance. Conclusion: Improved cognizance of health manager importance should occur initially; then, health-care center setup, assigning of exclusive occupational health managers, and organizational efforts to improve the working environment in tandem with the provision of educational training programs to improve work quality are necessary.

• IE interfaces
• /
• v.21 no.2
• /
• pp.221-228
• /
• 2008

The injection molding process is able to produce high precision manufactures as a single process with fast speed. However, the prices of both the mold and the molding machine are expensive, and the single process is very complex and difficult to compose of the exact relationship between the process setting conditions and the product quality. Therefore, the quality of a molded product often depends on a skillful engineer's operations in the design of both parts and molds. In this paper, the relationship between the process conditions and the defectiveness is built for better manufactures under settings of the appropriate parameters, and so it can reduce the setup time in the injection molding process. Quality Function Deployment (QFD) provides severe defectiveness factors along with the related process parameters. Also, neural networks estimate the relationship between defective factors and process setting parameters, and lead to reduce the defectiveness of molded parts.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.537-548
• /
• 2018

A tunnel deformation monitoring system is developed with the use of fiber Bragg grating (FBG) sensing technique, aiming at providing continuous monitoring of railway tunnel deformation in the long term, and early warning for the rail service maintainers and authorities to avoid catastrophic consequences when significant deformation occurs. Specifically, a set of FBG bending gauges with the ability of angle measurement and temperature compensation is designed and manufactured for the purpose of online monitoring of tunnel deformation. An overall profile of lateral tunnel displacement along the longitudinal direction can be obtained by implementing an array of the FBG bending gauges interconnected by rigid rods, in conjunction with a proper algorithm. The devised system is verified in laboratory experiments with a test setup enabling to imitate various patterns of tunnel deformation before the implementation of this system in an in-service high-speed railway (HSR) tunnel.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.251-261
• /
• 2020

The paper examines the role of some determinants of economics, politics and institutions on the budget deficit volatility in some countries of the Association of South East Asian Nations (ASEAN) such as Indonesia, Thailand and Vietnam. The paper uses the fixed effects model (FEM) and the random effects model (REM) to investigate panel data of these countries in the period of 1990-2018. Moreover, the study also explores ordinary least square (OLS) to analyze time-series data for each country in the same period to make comparison among them. The economic data is collected from international financial statistics and world development indicators. The data on political variables are collected from International Country Risk Data Guide (ICRG). The empirical results both confirm that corruption and political stability are important indicators of budget deficit. Besides, the paper suggests authorities should pay more attention on improving the institutional setup of the economy in order to avoid high and unstable deficit. The findings offer new insight on the budget deficit in essence and suggest that the most important thing need to be done ahead is to strongly implement anti-corruption actions. By doing so, the status of budget deficit would be remarkably improved immediately.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.271-277
• /
• 2012

In this paper, we propose a dynamic tree formation protocol for multiple UAV which is gathering data or accomplishing a mission such as disaster monitoring, environment monitoring, and disaster relief. Especilly, we designed Hop-LQI Weight algorithm to form optimal tree in wireless dynamic environment applying situation of radio signal attenuation over distance and implemented our algorithm in MSP 430 K-mote sensor platform using TinyOS codes. We verified performance of our algorithm by comparing average link setup time by the number of nodes with minimum LQI, link cost calculation method in wireless communication.