• Journal of the Korean Society of Visualization
• /
• v.20 no.3
• /
• pp.36-41
• /
• 2022

Drying process is involved in the production of various products including food, textiles, paper, pharmaceuticals, and batteries. Phase change of liquid to vapor generally requires enormous thermal energy, so in order to save energy, it is advantageous to develop an appropriate drier and use it under appropriate operating conditions, depending on the characteristics of materials. However, due to the complex, multiscale heat and mass transfer occurring during drying processes, predictions of appropriate drying conditions before actual operation are not easily achieved, leading to challenges in designing driers. Here, we developed a lab-scale experimental setup to evaluate the performance of band dries. The experimental setup was used to measure the moisture content and temperature change in the materials being dried in a belt dryer. Experimental results obtained using our lab-scale setup allow us to predict the performance of a full-scale band drier, thus suggesting a practical framework for predicting the drying process of various materials and developing band driers.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1066-1069
• /
• 2004

Recently the monitoring system of tool setup in high speed precision machining tool is required for manufacturing products that have highly complex and small shape, high precision and high function. It is very important to reduce time to setup tool in order to improve the machining precision and productivity and to protect the breakage of cutting tool as the shape of product is smaller and more complex. Generally, the combination of errors that geometrical clamping error of fixing tool at the spindle of machining center and the asynchronized error of driving mechanism causes that the run-out of tool reaches to 3∼20 times of the thickness of cutting chip. And also the run-out is occurred by the misalignment between axis of tool shank and axis of spindle and spindle bearing in high speed rotation. Generally, high speed machining is considered when the rotating speed is more than 8,000 rpm. At that time, the life time of tool is reduced to about 50％ and the roughness of machining surface is worse as the run-out is increased to 10 micron. The life time of tool could be increased by making monitoring of tool-setting easy, quick and precise in high speed machining center. This means the consumption of tool is much more reduced. And also it reduces the manufacturing cost and increases the productivity by reducing the tool-setup time of operator. In this study, in order to establish the concept of tool-setting monitoring the measuring method of the geometrical error of tool system is studied when the spindle is stopped. And also the measuring method of run-out, dynamic error of tool system, is studied when the spindle is rotated in 8,000 ∼ 60,000 rpm. The dynamic phenomena of tool-setup is analyzed by implementing the monitoring system of rotating tool system and the noncontact measuring system of micro displacement in high speed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.883-890
• /
• 2015

As the semiconductor processing technology has been developing, multiple cores or NoC(network on chip) can be contained in recent chips. GALS(globally asychronous locally synchronous) clocking scheme that has multi-clock domains with different frequencies or phase differences is widely used to solve power consumption and clock skew in a large chip with a single clock. A synchronizer is needed to avoid a synchronization problem between sender and receiver in GALS. In this paper, the setup and hold time of DFF required to design the synchronizer are measured using 180nm CMOS processing parameters depending on temperature, supply voltage, and the size of inverter in DFF. The simulation results based on the bisection method in HSPICE show that the setup and hold time are proportional to temperature, however they are inversely proportional to supply voltage, and negative values are measured for the hold time.

• The KIPS Transactions:PartA
• /
• v.14A no.2
• /
• pp.85-90
• /
• 2007

This paper presents a facial animation and expression control method that enables the animator to select any facial frames from the facial expression space, whose expression transfer paths the system can setup automatically. Our system creates the facial expression space from approximately 2500 captured facial frames. To create the facial expression space, we get distance between pairs of feature points on the face and visualize the space of expressions in 2D space by using the Multidimensional scaling(MDS). To setup most suitable expression transfer paths, we classify the facial expression space into four field on the basis of any facial expression state. And the system determine the state of expression in the shortest distance from every field, then the system transfer from the state of any expression to the nearest state of expression among thats. To complete setup, our system continue transfer by find second, third, or fourth near state of expression until finish. If the animator selects any key frames from facial expression space, our system setup expression transfer paths automatically. We let animators use the system to create example animations or to control facial expression, and evaluate the system based on the results.

• Journal of Korea Multimedia Society
• /
• v.1 no.2
• /
• pp.249-255
• /
• 1998

This paper analyzes the impact of Call Setup Time on UPT performance based on the AIN platform. Call Setup Time is used as the performance parameter. In implementing UPT based on the AIN platform, the geographical location of VLR affects network performance. In order to find an optimum location of VLR among three different types of structures, i.e. VLR is located close to Service Switching Point and Cell Site Controller and located at Service Control Point, each Call Setup Time on proposed time delay model is calculated and compared. Network performance is analyzed by changing the number of STP in No.7 signaling network in UPT and the utilization ratio, $\rho$, for SSP, STP and SCP.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.5
• /
• pp.300-310
• /
• 2007

The Session Initiation Protocol (SIP) is one of the major protocols used in call-setup over IP telephony. The SIP-signaled calls use many-sided states according to a request of user. In this paper, we suggest seven states and some events that help developers to design and implement new applications efficiently. And they enable an object-oriented design of the system. If you design the call-setup procedure only by the processing model suggested in RFC 3261 over commercial network, a fatal error may occur in the system because of heavy data traffic or unpredicted exception cases. However, according to the suggested seven states, if they are predefined events in the current system state, the standardized processing routine is executed. Otherwise, they can be processed by the exception routine in system. All event processing routines are designed and implemented using Finite State Machine (FSM).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.361-361
• /
• 2000

In this paper, we propose a novel control signaling protocol that efficiently controls connection setup and increases the utilization of network resources. The proposed protocol, Separated Control Signaling Protocol(SCSP), separates bearer control from call control lot WDM optical networks. The main function of call control is to check the availability of network resources such as wavelengths and receivers at destination node. Bearer control is to reserve and assign wavelengths. The signaling architecture of this protocol consists of call controller and hearer controller The call controller handles call setup and release, activates the beater controller, and manages the status of call and bearer. The bearer controller reserves wavelengths, sets up bearer, tears down bearer. and notifies the status of beater to call controller. The state transition diagrams of each controller are designed. Using control messages and related primitives, the information flows for call setup and bearer setup, hearer teardown and call release, and reaction for setup failures are described to evaluate the performance. The simulation results show that the separated control signaling protocol is superior to conventional one in terms of call blocking probability and resource utilization.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.3
• /
• pp.339-348
• /
• 2011

Reconfigurable manufacturing system (RMS), alternatively called changeable manufacturing, is a new manufacturing paradigm designed for rapid change in hardware and software components in order to quickly adjust production capacity and functionality in response to sudden changes in market or in regulatory requirements. Although there has been much progress in hardware components during the last decade, not much work has been done on operational issues of RMS. As one of starting studies on the operational issues, we suggest a framework for the system setup and scheduling problems to cope with the reconfigurability of RMS. System setup, which includes batching, part grouping, and loading, are concerned with the pre-arrangement of parts and tools before the system begins to process, and scheduling is the problem of allocating manufacturing resources over time to perform the operations specified by system setup. The framework consists of 8 scenarios classified by three major factors: order arrival process, part selection process, and tool magazine capacity. Each of the scenarios is explained with its subproblems and their interrelationships.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.64-76
• /
• 2017

Routing in mobile ad hoc networks (MANETs) is highly challenging because of the dynamic nature of network topology. AntHocNet is a bio-inspired routing protocol for MANETs that mimics the foraging behavior of ants. However, unlike many other MANET routing protocols, the paths constructed in AntHocNet are unidirectional, which requires a separate path setup if a route in the reverse direction is also required. Because most communication sessions are bidirectional, this unidirectional path setup approach is often inefficient. Moreover, AntHocNet suffers from looping problems because of its property of multiple paths and stochastic data routing. In this paper, we propose a modified path setup procedure that constructs bidirectional paths. We also propose solutions to some of the looping problems in AntHocNet. Simulation results show that performance is significantly enhanced in terms of overhead, end-to-end delay, and delivery ratio when loops are prevented. Performance is further improved, in terms of overhead, when bidirectional paths setup is employed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.4
• /
• pp.450-461
• /
• 1998

The spatial distribution of multipath fading using miniaturized experimental setup was analyzed. The spatial Fourier transform was carried out for the analysis of the period of fading and we could find out spatial frequency component of fading. Thus the analysis using this method shows the validity of miniaturized experimental setup. The miniaturized experimental setup was made by 5 times reducing of the real size. The simulation was performed at 2 GHz and the measurement was carried out at 10 GHz. Automatic antenna moving system was made for exact measurement of the multipath fading. Both simulated and measured results in miniaturized experimental setup were shown by electric field distribution and spatial frequency density distribution curves.