• 도시과학
• /
• 제9권2호
• /
• pp.51-56
• /
• 2020

The installation of soft ground instruments and the performance of measurement and management of the measurement shall be carried out in order to ensure the safety of the construction work and to improve the quality of the construction work. The purpose of the pressure density deposition calculation is to determine the stability of the foundation ground and the formulation by measuring and calculating the density conditions generated on the soil through the period of neglect after completion of the soil at each stage. In practice, it is judged that the analysis by the hyperbolic method can be applied to the safety side.

• 한국지반공학회논문집
• /
• 제23권6호
• /
• pp.53-66
• /
• 2007

말뚝과 토목섬유로 지지된 성토지반의 아칭효과를 규명하기 위하여 일련의 모형실험을 실시하였다. 모형실험에서는 단독캡 말뚝을 상하이동이 가능한 철판 사이에 일정간격으로 설치하고, 토목섬유를 포설한 후 성토를 실시하였다. 모형실험에서는 침하판을 하강시킴으로써 연약지반의 침하를 모사하였으며, 침하판이 하강함에 따라 성토지반에 지반아칭이 발휘되었다. 성토지반과 토목섬유의 변형거동은 카메라로 관찰하였다. 또한 계측시스템을 통하여 말뚝캡에 작용하는 하중과 토목섬유의 인장변형률을 측정하였다. 모형실험결과 연약지반부의 침하가 발생할 때, 지반아칭효과로 인하여 말뚝으로 전이되는 성토하중이 급격히 증가하는 것으로 나타났다. 이때 토목섬유가 설치되지 않은 경우는 말뚝에 작용하는 하중이 최대값에 도달한 후 감소하는 반면, 토목섬유로 복합지지된 경우는 침하에 따라 말뚝하중이 점진적으로 증가하면서 일정한 값으로 수렴한다. 이것은 토목섬유에 의한 보강이 성토지반의 변형 억제에 효과적임을 나타내는 것이다. 한편, 침하유발시 말뚝캡 사이의 토목섬유는 원호형태로 변형을 일으키는 것으로 나타났다. 말뚝과 토목섬유로 지지된 성토지반에서 말뚝캡으로 전이되는 성토하중은 지반아칭효과와 토목섬유의 인장변형률을 고려함으로써 모형화할 수 있다.

• 한국지반공학회논문집
• /
• 제30권12호
• /
• pp.63-72
• /
• 2014

측방유동 지반 속에 설치된 매설관의 측방이동과 이에 대한 성토지지말뚝의 방지효과를 관찰하기 위하여 일련의 현장 실험시공을 시행하였다. 매립중인 서해안 연약지반에 지하매설관(H.P:400mm)를 부설하고 인접 위치에 성토를 3단계로 시행하여 침하판과 지중경사계를 이용하여 지하매설관의 수직변위(침하)와 수평변위를 확인하였다. 성토에 따른 측방유동 억지대책으로는 성토지지말뚝을 설치하였다. 실험시공 결과 성토도중에는 매설관이 미미하게 융기하는 현상이 발생하였고 추후 침하하다 점차 수렴하는 거동으로 나타났다. 성토지지말뚝 보강 효과는 약 2.0배로 확인되었다. 또한, 침하와 변위는 상부지반에서는 크고 하부지반에서는 적게 침하가 발생하였고 변위는 비례하여 발생하는 것으로 나타났다.

• 한국인터넷방송통신학회논문지
• /
• 제9권3호
• /
• pp.45-54
• /
• 2009

본 논문은 신경외과 및 일반외과 영역에서 골 고정용 금속판으로 골 수술 및 치료를 하는 과정에서 골 고정요 금속판의 굴곡강도와 강성을 평가할 수 있는 강요평가 알고리즘을 구현하였다. 굴곡곡선의 최대 포인트 점은 0.2% 상쇄변위(offset displacement)에서 평형하게 접근 할 수 있는 포인트 P점을 최대 하중에 부여하는 굴곡 점으로 적용하였다. 실험에 사용한 플레이트(Plate)는 ${\Phi}13$와 ${\Phi}18$이며, 강도평가의 알고리즘은 플레이트 ${\Phi}13$, ${\Phi}18$, ${\Phi}13-{\Phi}18$ 비교하였으며, 플레이트에 압박하는 힘의 알고리즘을 산출한 결과 굽힘강도의 최대값이 311N, 387N, 410N, 474N로 나타났고, 변위(Displacement)에 따라 하중에 견디는 시점인 인장강도가274(N), 324(N), 382(N), 394(N)로 나타났음으로 이 시점이 금속판의 굴곡운동 값으로 결정되었다. 본 연구의 결과로 한 개의 축을 기준으로 발생하는 골 고정용 금속판의 강도 조절 문제를 평가알고리즘으로 구성함으로 해결할 수 있었고, 형태 변화에 따른 조절기능을 검증할 수 있는 시스템이 새로운 알고리즘 형성으로 가능할 것으로 예상된다.

• Structural Engineering and Mechanics
• /
• 제90권6호
• /
• pp.551-568
• /
• 2024

The present study deals with static and dynamic behaviors including forced vibrations of an elastic rectangular nano plate on the two-parameter foundation. Firstly, the rectangular plate is assumed to be subjected to uniformly distributed and eccentrically applied concentrated loads. The governing equations of the problem are derived by considering the dynamic response of the plate, employing a series of the Chebyshev polynomials for the displacement function and applying the Galerkin method. Then, effects of the non-essential boundary conditions of the plate, i.e., the boundary conditions related to the shearing forces, the bending moments and the corner forces, are included in the governing equation of motion to compensate for the non-satisfied boundary conditions and increase the accuracy of the Galerkin method. The approximate numerical solution is accomplished using an iterative process due to the non-linearity of the unilateral property of the two-parameter foundation. The plate under static concentrated load is investigated in detail numerically by considering a wide range of parameters of the plate and the foundation stiffnesses. Numerical treatment of the problem in the time domain is carried out by assuming a stepwise variation of the concentrated load and the linear acceleration procedure is employed in the solution of the system of governing differential equations derived from the equation of motion. Time variations of the contact region and those of the displacements of the plate are presented in the figures for various numbers of the two-parameter of the foundation, as well as the classical and nano parameters of the plate particularly focusing on the non-linearity of the problem due to the plate lift-off from the unilateral foundation. The effects of classical and nonlocal parameters and loading are investigated in detail. Definition of the separation between the plate and the two-parameter foundation is presented and applied to the given problem. The effect of the lift-off on the static and dynamic behavior of the rectangular plate is studied in detail by considering various loading conditions. The numerical study shows that the effect of nonlocal parameters on the behavior of the plate becomes significant, when nonlinearity becomes more profound, due to the lift-off of the plate. It is seen that the size effects are significant in static and dynamic analysis of nano-scaled rectangular plates and need to be included in the mechanical analyses. Furthermore, the corner displacement of the plate is affected more significantly from the lift-off, whereas it is less marked in the time variation of the middle displacement of the plate. Several numerical examples are presented to examine the sensibility of various parameters associated with nonlocal parameters of the plate and foundation. Both stiffening and softening nonlocal parameters behavior of the plate are identified in the numerical solutions which show that increasing the foundation stiffness decreases the extent of the contact region, whereas the stiffness of the shear layer increases the contact region and reduces the foundation settlement considerably.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1088-1093
• /
• 2010

The Smart bi-directional pile load test with variable end plate overcomes the shortcoming of the Osterberg cell test. It is possible that the ultimate bearing capacity of piles can be known by using two different end plates. The first step is to measure end bearing capacity with smaller end plate and the second step is similar to the conventional O-cell test. In this study, model test was performed to evaluate the smart bi-directional pile load test in sand. Vertical displacement of the model pile were messured at the axial loading condition.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.597-604
• /
• 2002

The piled raft foundation Is an innovative design concept to reduce both the maximum settlement and differential settlements caused by concentrated building loads and load eccentricities, and also to reduce the bending moments of the raft. The main concern given in the design of piled raft foundations is proper judgments both of relative proportions of loads carried by the raft and piles, and of the effect of the pile support on the maximum and differential settlements In the present study, the piled raft foundation used in the foundation system of Richensia Building at Youido, Seoul is introduced and is carried out analyzing the results of field tests such as plate load tests, large plate load test, pile load test, and piled raft load test.

• 한국방재학회 논문집
• /
• 제5권4호
• /
• pp.49-57
• /
• 2005

본 연구에서는 상재하중을 적용한 굴착모형실험을 통하여 상재하중 적용으로 인한 굴착단계별, 벽체강성 및 지반조건에 따른 토류벽체의 수평변위, 배면지반 지표침하, 토류벽체에 적용되는 토압변화 및 분포에 대하여 실험결과치, 이론치 및 현장자료 분석치와 상호비교, 분석하여 상재하중 적용에 의한 영향을 규명하였다. 그 결과 상재하중이 적용된 모형지반에서의 지표침하곡선 형태는 상재하중 미 적용시 지표침하 곡선형태의 정규확률 분포곡선과 달리 상재하중 중앙 부분이 최대 침하를 일으키는 포물선 형태의 침하를 보이고 있으며, 굴착단계별 상재하중 적용으로 인한 벽체최대수평변위는 최종굴착시에 0.8H(보:굴착깊이) 지점에서 벽체의 최대수평변위가 발생하였으며, 상재하중 적용에 따른 벽체변위량의 증가범위는 벽체상부로부터 하중이격거리에 2배의 깊이까지 증가범위를 보였다. 또한, 굴착단계별 지표면의 침하로 인한 기초판의 각 변위는 최종단계에서의 각 변위가 가장 크게 발생하였고, 벽체강성별로는 두께 4mm(유연계수 ${\rho}\;:480m^3/t$) 벽체가 두께 9mm(유연계수 ${\rho}\;: 40m^3/t$)보다 최대 3배 이상 발생하고 있어 벽체강성의 영향이 매우 큼을 알 수 있다.

• Geomechanics and Engineering
• /
• 제10권4호
• /
• pp.405-422
• /
• 2016

The paper deals with the results of the laboratory cyclic plate load tests performed on the reinforced soft clay beds. The performances of the clay bed reinforced with geocells and geocells with additional basal geogrid cases are compared with the performance of the unreinforced clay beds. From the cyclic plate load test results, the coefficient of elastic uniform compression ($C_u$) was calculated for the different cases. The $C_u$ value was found to increase in the presence of geocell reinforcement. The maximum increase in the $C_u$ value was observed in the case of the clay bed reinforced with the combination of geocell and geogrid. In addition, 3 times increase in the strain modulus, 10 times increase in the bearing capacity, 8 times increase in the stiffness and 90% reduction in the settlement was observed in the presence of the geocell and geogrid. Based on the laboratory test results, a hypothetical case of a prototype foundation subjected to cyclic load was analyzed. The results revealed that the natural frequency of the foundation-soil system increases by 4 times and the amplitude of the vibration reduces by 92% in the presence of the geocells and the geogrids.

• 한국식품조리과학회지
• /
• 제19권2호
• /
• pp.231-240
• /
• 2003

The purpose of this study was to evaluate the effect of implementing the HACCP system on foodservice establishments. At first, the hygienic conditions were measured by microbiological hazard analyses of the cooking utensils and working areas. In order to solve the detected problems, the HACCP system was implemented, after what was considered a sufficient settlement period following the initial assessment, then microbiological verification was performed again. In relation to the cooking utensils and equipment(kitchen knives, cutting boards, knives for shredding vegetables, refrigerators, baskets, barts, working tables, preparation tables, tungs, dish-clothes and drains) the microbiological inspection on the Total Plate Count, Coliforms, Staphylococcus aureus and Listeria monocytogenes, were conducted with regard to the working areas(working tables, preparation tables, seasoning's shelves, serving tables, drinking water tables, refrigerators, storage rooms and dining tables), the Total Plate Count and Fungi were also examined. According to the microbiological hazard analyses there were many problems, especially with cutting boards, baskets, barts, dish-clothes and sinkballs. However, by introducing the HACCP system, the microbiological hazard levels were able to be controlled and lowered, and the total aerial bacteria in the working areas of the foodservice establishments were detected at levels below 6 CFU/plate.