• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.548-553
• /
• 2000

A new design of cylindrical capacitive sensor(CCS) for the displacement measurement of precision active magnetic bearing(AMB) spindle is presented in this paper. This research is motivated by the problem that existing 4-segment CCS is still sensitive to the $3^{rd}$ harmonic component of the geometric errors of a rotor. The procedure of designing new CCS starts from the modeling and error analysis of CCS. The angular size of CCS is set up as a design parameter, and new 8-segment CCS is introduced to possess an arbitrary angular size. The optimum geometry of CCS to minimize the effect of geometric errors is determined through minimum norm approach. Experimental results with test rotors have confirmed the improvement in geometric error suppression.

• 자원ㆍ환경경제연구
• /
• 제11권1호
• /
• pp.81-97
• /
• 2002

Unlike the existing supply-centered water policy, demand management policy of water has become an increasingly important issue in Korea. This paper attempts to analyse the demand for domestic water in Seoul. We employed Engle-Granger's error correction model(ECM) to deduced the price and income elasticities of the water demand. Particularly, we used accounted water amounts instead of supplied water amounts as representative variable of water demand. The result indicates that ECM set up is appropriate and short-run and long-run price elasticities derived by the model are -0.145 and -1.414. In contrast with other studies, we can conclude that the water demand for the water price is elastic. Besides, we can infer from this result that the water price policy with respect to a decrease of leakage ratio is more effective.

• Nuclear Engineering and Technology
• /
• 제25권3호
• /
• pp.371-380
• /
• 1993

운전원의 언어적인 제어 논리를 이용한 모델과 무관한 제어기가 증기 발생기의 수위 제어를 위해 개발되었다. 오직 9개의 룰을 수위 오차와, 응축 수위 변화를 표현하는 유량 오차로부터 얻어졌다. 벨형의 소속함수는 민감도 분석을 통하여 조절되었고, 결과 과도 상태와 정상상태 공히 양호한 제어성능을 보였다. 저출력에서 전 출력까지의 다단계 출력 증가에 대하여, 전 운전 영역에서 좋은 제어를 보였다.

• 조명전기설비학회논문지
• /
• 제25권5호
• /
• pp.92-97
• /
• 2011

This paper deals with the improvement of electrode installation for measurement of ground resistance through investigation on the spot in buildings. The investigation was carried out for an earthing terminal board for measurement of ground resistance, installation of auxiliary electrode, etc. The criteria value is set up by measuring method of ground resistance in international standard. In case of inadequate installation of auxiliary electrode, a relative error is analyzed and adequate installation method of auxiliary electrode is proposed. As a consequence, it is necessary to write direction of ground and equipment, and separate auxiliary electrode for measurement of ground resistance in order to minimize measuring error.

• 한국소음진동공학회논문집
• /
• 제18권10호
• /
• pp.997-1005
• /
• 2008

Linear motor stage is a useful device in precision engineering field because of its simple power transmission mechanism and accurate positioning. Even though linear motor stage shows fine positioning accuracy along travel axis, geometric dependent errors which relay on machining and assembling accuracy should be addressed to increase total positioning performances. In this paper, we suggests a cost effective yaw error compensation servo-system which is mounted on platform of the stage and nullify travel position dependent yaw error. This paper also provides a method of designing a sliding mode control which is robust to existing friction disturbance and model uncertainties. The reachability condition of slinding mode control for the yaw error compensating servo-system has been established. From some experimental results by using an experimental set-up, the sliding mode control showed its effective in disturbance rejection and its performance was superior to conventional linear controls.

• Earthquakes and Structures
• /
• 제3권1호
• /
• pp.17-35
• /
• 2012

Simplified equations for fundamental period of vibration of skeletal structures provided by most seismic design provisions suffer from the absence of any associated confidence levels and of any reference to their empirical basis. Therefore, such equations may typically give a sector of designers the false impression of yielding a fairly accurate value of the period of vibration. This paper, although not addressing simplified codes equations, introduces a set of mathematical equations utilizing the theory of error propagation and First-Order Second-Moment (FOSM) techniques to determine bounds on the relative error in theoretically calculated fundamental period of vibration of skeletal structures. In a complementary step, and for verification purposes, Monte Carlo simulation technique has been also applied. The latter, despite involving larger computational effort, is expected to provide more precise estimates than FOSM methods. Studies of parametric uncertainties applied to reinforced concrete frame bents - potentially idealized as SDOF systems - are conducted demonstrating the effect of randomness and uncertainty of various relevant properties, shaping both mass and stiffness, on the variance (i.e. relative error) in the estimated period of vibration. Correlation between mass and stiffness parameters - regarded as random variables - is also thoroughly discussed. According to achieved results, a relative error in the period of vibration in the order of 19% for new designs/constructions and of about 25% for existing structures for assessment purposes - and even climbing up to about 36% in some special applications and/or circumstances - is acknowledged when adopting estimates gathered from the literature for relative errors in the relevant random input variables.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.372-374
• /
• 2009

In this research, an obstacle avoidance method is proposed. The common usage of a robot is indoor and the obstacles to the indoor robot is studied. The accurate detection of direction after overcoming the obstacles is necessary for performance of autonomous navigation and mission project. The sensors such as Laser, Ultrasound, PSD can be used to measure the obstacles. In this research, a PSD sensor is used to detect obstacles. It detects the height and width of obstacles located on the floor. Before measuring the obstacles, a calibration of the sensor was done and it produced a better accuracy. We have plotted an error graph using data obtained from the repeated experiments. The graph is fitted to a polynomial curve. The polynomial equation is used for the robot navigation. And in this research, a model of the error of the direction of the robot after overcoming obstacles was obtained also. The prototype of the obstacle and the error of the direction after overcoming the obstacles are modelled using a neural networks. The input of the neural network composed with the height of the obstacles, the speed of robot, the direction of wheels and the error of the direction. To implement the suggested algorithm, we set up a robot which is operated by a notebook computer. Experiment showed the suggested algorithm performed well.

• 대한방사선치료학회지
• /
• 제32권
• /
• pp.61-71
• /
• 2020

목 적: 대동맥 주위 림프절(PAN)을 포함한 전골반암의 다중치료 중심점(multi-isocenter) 용적 변조 회전 방사선 치료 계획 시 콜리메이터 각도의 변화가 치료 계획의 질, 접합부에서의 선량 재현성, 그리고 접합부의 환자 자세 오차에 미치는 영향에 대해 알아보고자 한다. 대상 및 방법: PAN을 포함한 전골반암 환자 10명을 대상으로 하였다. Eclipse(version 13.7) 치료계획 시스템에서 HD MLC가 장착된 Truebeam STx를 사용하여, 기본으로 설정된 콜리메이터 각도인 10° 외에 20°, 30°, 45°로 변화시키고, 그 외 모든 치료 계획 조건은 동일하게 설정하여 치료 계획을 수립하였다. 수립된 치료 계획은 계획표적용적의 coverage와 조사범위지표(CVI), 균질성 지표(HI)를 평가하였고, 정상조직은 각 부위별로 임상에서 사용하고 있는 지표로 비교하였다. 접합부의 선량 재현성 평가를 위해 파머형 전리함을 삽입한 고체물 팬텀을 이용하여 절대 선량을 측정하였다. 환자 자세 오차에 따른 영향을 알아보기 위해 치료계획 시스템에서 각도별로 등중심점의 위치를 종축방향(in, out)으로 1~3mm 임의로 이동하고 접합부에 가상의 체적을 설정하여 선량 변화를 평가하였다. 결 과: CVI 평균값은 45°에서 PTV-45 0.985±0.004, PTV-55 0.998±0.003, HI 평균값은 45°에서 PTV-45 1.140±0.074, PTV-55 1.031±0.074로 1에 가장 가까운 값을 보였다. 결정 장기는 10°와 비교하여 45°에서 콩팥의 V20Gy이 9.66%, 방광의 평균선량과 V30이 1.88%, 2.16% 감소하였다. 치료 계획과 실측정한 접합부의 선량값의 차이는 0.3% 이내로 모두 허용오차범위 내에 들어왔다. 환자 자세 오차로 인한 접합부에서 선량변화량은 in 3mm 이동시 최대 선량이 10°, 20°, 30°, 45°에서 14.56%, 9.88%, 8.03%, 7.05%로 증가하였으며, out 3mm 이동시 최소 선량은 10°, 20°, 30°, 45°에서 13.18%, 10.91%, 8.42%, 4.53%로 감소하였다. 결 론: PTV의 CVI, HI 및 결정 장기 보호 면에서 콜리메이터 각도가 증가할수록 전반적으로 개선된 수치를 보였다. 접합부의 환자 자세 오차 영향은 각도가 커질수록 그 차이가 줄어들어 환자 자세 오차에 대한 불안함을 어느 정도 개선하는데 도움이 될 것이라 생각한다. 결론적으로 콜리메이터 각도는 다중치료 중심점 VMAT 치료 계획의 질 및 접합부 선량에 영향을 줄 수 있는 인자임을 인지하고 치료계획 시 콜리메이터 각도 설정에 신중을 기해야 할 것으로 사료된다.

• 전기학회논문지
• /
• 제67권9호
• /
• pp.1202-1209
• /
• 2018

This paper is concerned with the problem of setting controller's parameters when applying the intelligent PID (i-PID), which has recently been proposed and had many successful results, to the two-degree-of-freedom (2DoF) PID controller structure. Generally, the parameter settings of conventional PID controllers are known to be quite difficult and be dependent on the characteristics of the plants. In addition, it is less known how the two 2DoF parameters are set up for the improvement of transient characteristics. Here, we are going to present one of the criteria for parameter setting in the case of using a 2DoF i-PID, by evaluating the error signals to the set-point and disturbance. That is, we first, obtain parameters of i-PID by optimizing the disturbance responses, and then determine two parameters of 2DoF component through optimizing set-point response. The standard values of all parameters are calculated for the 7 types of test batches and rounded up as a table.

• 한국콘텐츠학회논문지
• /
• 제12권5호
• /
• pp.303-310
• /
• 2012

방사선 치료에 있어서 정확한 환자 포지셔닝과 셋업은 치료의 성패를 좌우할 수 있는 중요한 인자이다. 기존의 방사선 치료실내에 장착된 3-laser system을 이용한 셋업에서, 최근에는 체표면 윤곽 스캐닝 시스템(C-Rad system)의 사용이 시도되고 있다. 체표면 윤곽 스캐닝 시스템의 유용성을 평가하기 위하여 C-Rad system과 3-laser system을 이용한 셋업 오차의 정확도를 비교, 평가함으로써 임상에서의 유용성을 확인하고자 하였다. 인체부위는 내부적인 움직임이 없고, 고정용구의 적용이 간편한 두경부로 한정하였으며, Alderson Rando anthropomorphic phantom과 두경부에 병변이 있는 방사선 치료 환자 10명을 대상으로 하였다. Phantom을 대상으로 한 C-RAD system의 셋업 에러 평균과 표준편차는 X축 $0.55{\pm}0.51mm$, Y축 $-0.2{\pm}0.523mm$, Z축 $-0.85{\pm}0.587mm$로 나타났으며, 환자를 대상으로 한 실험에서는 X축 $-0.05{\pm}0.621mm$, Y축 $0.075{\pm}0.755mm$, Z축 $-1.025{\pm}0.617mm$로 산출되어, 전반적으로 3-laser system에 비해 셋업의 정확도가 우수하였으나, Z축의 에러 발생률은 C-RAD system이 약간 높게 나타났다. 체표면 윤곽 스캐닝 시스템은 두경부의 방사선 치료 시에 정확한 포지셔닝을 유도함으로써 셋업오차를 최소화 시키는데 기여할 것으로 사료된다.F