• 한국전자통신학회논문지
• /
• 제8권4호
• /
• pp.583-588
• /
• 2013

본 논문에서는 로봇에서 다축 모션 제어를 쉽게 할 수 있는 AC 서보 드라이버의 성능 검증을 위하여 벡터 전류 제어 구현 기법을 제안한다. 이를 위해 먼저 PMSM을 구동을 위한 드라이버를 개발한 후 이 드라이버가 정상적으로 동작하는지를 벡터 전류로 확인하였다. 벡터 제어는 무부하에서 전류 벡터 제어를 실행하여 지령 전류에 따른 추종 전류를 비교하였다. 검증 결과 만족할 만한 결과를 얻었음을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.577-578
• /
• 2010

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권6호
• /
• pp.78-82
• /
• 1995

It is needed to robust control for D.C. servo motor according to industrial automation. However, when a motor has an effect of disturbance and variable load, it is very difficult to guarantee the robustness of the system. as a compensation way of solving this problem, in this paper, a expert supervisory control method for motor control system is presented. Expert supervisory controller is designed by error and error change, and nth control input is decided by the addition of (n-1)th control input and inference amount of increase or decrease. Control input of expert supervisory control is transmitted to input, and the disturbance effect decrease remarkable by control input. The robustness of D.C. servo motor using expert supervisory control is demonstrated by the computer simulation.

• 수산해양기술연구
• /
• 제28권1호
• /
• pp.39-44
• /
• 1992

Analog PID controllers have been designed to make good use of position control in industries. Recently, the importance of digital position control is emphasized for the requirements of controller which are not only to control the objects but to include various aspects such as easiness of design and implementation, simple exchange of control program and convenient communications of data between various controllers and a host computer. This study proposes a combined control method which is mixed the vaiable structure control (VSC) with the PI control for minimum time position control of DC servo motor by microcomputer. The results of test by this method show offset-free and minimum time optimal position control which is not affected by the disturbance and the system parameter variations. The validity of the proposed method comparing with the conventional PID control is proved by the response experiments.

• 조명전기설비학회논문지
• /
• 제19권3호
• /
• pp.66-74
• /
• 2005

최근 급속도로 발전되고 있는 산업분야에서 서보시스템은 빠른 응답특성과 고도의 정밀성이 요구되고 있다. 이러한 특성의 요구로 인하여 산업용 서보전동기 구동시스템에 고정자 혹은 회전자 자속벡터의 순시위치와 고정자 전류를 검출하여 좌표변환에 의해 고정자 전류를 여자성분과 토크성분으로 분리 제어하는 벡터제어 이론이 많이 적용되고 있다. 벡터제어에서는 좌표변환과 SVPWM 발생을 위해 많은 연산을 요구하므로 디지털 제어시스템에서 DSP에 많은 부담을 주고 있다. 그러나 직접토크제어(DTC) 알고리즘은 디지털 제어 구조로 토크와 고정자 자속 성분의 전류제어에 룩업 테이블을 사용하므로 벡터제어처럼 많은 제어기와 복잡한 연산을 필요로 하지 않고, 동적 응답특성이 전동기의 정수변화에 영향이 적으면서 직접 전동기의 토크와 고정자 자속을 독립적으로 제어할 수 있는 장점을 가진다. 따라서 본 논문에서는 표면 부착형 영구자석 동기전동기(SPMSM)를 사용하여 DTC에 의한 서보 전동기 제어와 벡터제어에 의한 서보 제어시스템 결과를 비교하여 직접토크제어 알고리즘의 산업용 서보 시스템으로의 적용 가능성을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.322-326
• /
• 1990

The solution of problems in the automation of mold manufacturing process are high speed and resolution. To catch two problems at once, digital servo system will be essential replacing the analog servo system. In this paper, we tried some hardware/software approach including, designing basic structure, modeling of servo actuator, and designing & simulating of velocity & position controller. Finally, we constructed the hardware for 1 axis digital servo controller of NC system. As a result we obtained the design technics of digital servo systems for high speed NC system.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.944-949
• /
• 2017

Recently, the demand of maglev systems in the manufacturing industry for LCD and OLED display panels, which are required to be very clean and possess vacuum systems, has been increasing due to their characteristics such as being non-contact, noise free and eco-friendly. However, it is still a challenge to simultaneously control both the propulsion and levitation for their interactive effect difficult to be exactly measured. In this paper, we proposed a new tuning method for controlling the magnetic levitation force robustly against the levitation disturbance caused by a propulsion system, based on LQ servo optimal control. The disturbance torque of the LSM propulsion system is calculated through FEM analysis in such a way that the LQ servo controller is determined in order to minimize the effect of the disturbance. The robust performance of the proposed LQ servo control method for the in-track type magnetic levitation systems is demonstrated via simulations and experiments.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.244-249
• /
• 2008

This paper deals with speed control of DC servo motor using a Fuzzy tuning observer. Speed sensor detect a speed of rotor continuously. But it have a limit as a driving speed to detect speed precisely. So it is problem to improve the performance of the driving system. To solve the problem, it is studied to detect a speed of DC motor without sensor. In particular, study on the method to estimate the speed using the observer is performed a lot. In this parer, the gain of the observer is properly set up using the fuzzy observer. The fuzzy observer has a superior transient characteristic and is easy to implement compared the existing method is designed. It estimate the derivative of the armature current directly using the armature current measured in the DC motor. It estimate the speed of the rotor using the differentiation. It is proposed speed sensorless control method using the estimated speed. Optimal gain of Luenberger observer is set up using the fuzzy observer and adapted speed control of DC servo motor low speed operation. It is proved excellence and feasibility of the presented observer from the comparison tested a case with a speed sensor and a case without a speed sensor which used a highly efficient drive and 200W DC servo motor starting system.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1680-1689
• /
• 2002

This paper studies on the design of a looper control system for hot strip mill finisher using ILQ(Inverse Linear Quadratic optimal control) control method. The loopers are placed between each rolling stands and looper control plays an important role in regulating strip tension. The strip tension is controlled by raising and lowering the looper and by changing the speed of main work rolls. Firstly, it is shown from a nonlinear dynamic simulation that the strip tension is more influenced by difference of rolling speed than that of the looper angle. Secondly, a servo controller of the looper is designed using ILQ control method of which the characteristics and algorithms are simply introduced. Finally, the performances of the ILQ servo controller are compared with those of the LQI servo controller from computer simulation. In result, it is shown that the proposed ILQ servo controller has the better performances and robustness far parameter perturbations and disturbances than those of LQI controller.

• 융합신호처리학회논문지
• /
• 제5권1호
• /
• pp.40-45
• /
• 2004

본 논문에서는 병렬 분산제어 방식을 이용한 곡면유리 자동성형 시스템을 개발한다. 설계된 시스템은 PC, 하나의 주제어기, 그리고 11개의 서보제어기로 구성된다. 각 요소들은 RS-232C와 8비트 데이터 버스로 연결된다. 안정성과 제어성능을 고려하여 정밀 PID 모션제어기 프로세서와 DC모터 제어에 사용되는 H-브리지를 사용한다. 설계된 시스템에서, PC는 주어진 곡률반경에 대한 각 구조물의 위치 값을 계산하고 이 값에 대응하는 모터 회전 데이터를 계산하며 작업자의 조작 입력을 위한 사용자 인터페이스를 제공한다. 주제어기는 PC로부터 동작 명령과 제어 파라미터를 받아 버스 통신방식을 이용하여 이를 각 서보제어기로 전달하며 서보제어기는 주제어기로부터 넘겨받은 동작명령과 제어 파라미터를 이용하여 각 모터에 대하여 PID제어를 수행한다.