• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1012-1016
• /
• 1991

An effective visual servo control system for robotic manipulators based on neural networks is proposed. For this control system, firstly, one neural network is used to learn the mapping relationship between the robot's joint space and the video image space. However, in the proposed control scheme, this network is not used in itself, but its first and second derivatives are used to generate servo commands for the robot. Secondly, an adaptive Adaline network is used to identify the dynamics of the robot and also to generate the proper torque commands. Computer simulation has been performed indicating its superior performance. As far as the authors know, this is the first time attempt of the use of neural networks for a visual servo control of robots that compensates for their changing dynamics.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.5
• /
• pp.793-800
• /
• 2004

The purpose of this study is to develope a servo system with faster and more accurate response. This paper describes a method of approximate reasoning for fuzzy control of servo system based on the decomposition of $\alpha$-level fuzzy sets. We propose that fuzzy logic algorithm is a body from fuzzy inference to defuzzificaion cases where the output variable u directly is generated PWM The effectiveness for robust and faster response of the fuzzy control scheme are verified for a variable parameter by comparison with a PID control and fuzzy control A position control of DC servo system with a fuzzy logic controller is demonstrated successfully.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.176-182
• /
• 1999

In this paper, we consider a decoupling control and a servo control for the JINAMCHA of which the cart and the pointer is coupled very strongly. The right eigenstructure assignment(i.e. simultaneous assignment of eigenvalues and right eigenvectors) is used for decoupling the motions of the cart and the pointer. The CGT(Command Generator Tracker) is used for a servo control of the JINAMCHA. The performance of the proposed control scheme, that is the combination of the right eigenstructure assignment and the CGT, is evaluated by simulations. The results show that the proposed controller has better performance than the LQR with limiting properties and the conventional LQ servo.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.5 s.110
• /
• pp.479-484
• /
• 2006

This paper presents an active control of the aperture type near-field storage head. In order to achieve a fast and accurate control, a dual servo control algorithm is applied. Based on the big difference in time constants of two actuators, they are used independently. With the combination fine and coarse actuator, the disk is rotated up to 10 rpm speed until the gap is controlled within 100 nm. From the experimental results, the feasibility and the performance of active dual servo gap control is proved.

• Journal of Power Electronics
• /
• v.2 no.1
• /
• pp.25-31
• /
• 2002

Servo drives with microcomputer control provide the possibility of using modern and sophisticated control algorithms. As an additional feature it is possible to implement parallel and/or redundant software and hardware structures to realise safe motion or similar security functions. Unfortunately microcomputer control also has some impact on the behaviour of servo drives. Control algorithm, cycle time, sensors and interface have to be perfectly synchronised. Special control schemes are necessary on the line side (power supply) to meet the actual requirements concerning EMC. This contribution presents experiences and results obtained from a modern digital drive system pointing out the influences of low and high accuracy position sensors and the interdependencies mentioned above.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3073-3076
• /
• 1999

In this paper, $H_{\infty}$ two-degree-of freedom(2-DOF) model following control method is applied for the control of a brushless servo motor to achieve high robust performance. The proposed robust control algorithm designed to meet the robust stability and performances present that the robust control method is superior to conventional control methods in controlling the speed and position of a servo motor. The designed controller is implemented as an outer loop controller to a factory designed motor-servopack system. It is illustrated by simulations that the proposed method is effective to control servo systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.725-727
• /
• 2010

For simulation of Boat motion, pitch, motion element of roll and yaw direction could simulated. The combination of the marine use various multi sensor surveillance system technology with the development of servo motion control algorithm and gyro sensor in six freedom motion is implemented to analyze the movement response. The stabilization of the motion control is developed and Nano driving Precision Pan-Tilt/Gimbal system is obtained from the security positioning cameras with ultra high speed device is used to carry out the exact behavior of the device.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.25-33
• /
• 1997

This study deals with controlling the velocity of Electr-Hydraulic servo system through the non-stan-dard PIC control. This was done as follows. First, we modeled nonlinearised model and linearised model, second designed analytic program for electro-hydraulic servo system velocity control Lastly, to im- prove dynamic characteristics of system we designed non-standard PID contoller and verifed throughth experi- ment and MATLAB program, commercial used software.

• Transactions of Materials Processing
• /
• v.13 no.3
• /
• pp.253-261
• /
• 2004

The machining technology for the brittle materials such as ceramics are applied to the fields of MEMS(micro electromechanical system) by the progress of new machining technologies such as Etching, Diamond machining, Micro drilling, EDM(Electro discharge machining), ECDM(Electro discharge machining), USM(Ultrasonic machining), LBM(Laser beam machining), EBM(Electron beam machining). Especially, the USM technology can be applied to the dieletric brittle materials such as silicon, borosilicate glass, silicon nitride, quartz and ceramics with high aspect ratio. The micro machining system with machining force controlled position servo is developed in this paper and the optimized ultrasonic machining algorithm is constructed by the force controlled position servo control. The load cell is adapted in the force measuring and the servo control algorithm, suit for the ultrasonic machining characteristics, is estabilished with using the PID auto-tunning functions at the PMAC system which is generally adapted in the field of robot industries. The precision force signal amplifier is constructed with high precision operational amplifier AD524. The vacuum adsorption chuck which is made of titanum and internal flow line is engraved, is used in the workpiece fixing. The mahining results by USM shows that there are some deviation between the force command and the actual machining force that the servo control algorithm should be applied in the machining procedures. Therefore, the constant force controlled position servo system is developed for the micro USM system and by the examination machining process in USM, the stable USM system is realized by tracking the average value of machining force.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.294-295
• /
• 2007

80년대 초에 개발된 CD(Compact Disc) Disc는 지난 27여 년간 급속한 발전을 하였다. 95년에 DVD가 발표되면서 영화 Title제작이 되어 우리는 안방에서 고화질의 DVD를 감상할 수 있었다. CD-R(Recordable) 로부터 시작된 기록 기술은 CD-RW를 거쳐 DVD-Recordable, DVD-ReWritable 및 DVD-RAM, Light Scribe등 거쳐 BD(Blu-Ray) 기술에 까지 이르게 되었다. 광 Disc 기술은 3가지 분야로 나눌 수 있다. 안정된 제어를 위한 Servo 기술, Mechanical 기술, PC와communication 할 수 있는 Interface 기술 등으로 나눌 수 있다. Servo 제어 기술은 다음과 같이 4가지 분야로 구성되어 있다. Focus Servo, Tracking Servo, Sled Servo, Spindle Servo. Disc 회전을 제어를 담당하고 있는 Spindle Servo Block에서는 Hall Sensor를 이용하여 Disc의 회전을 Count하여 Feedback 하였다. 그러나 갈수록 심화 되고 있는 가격 경쟁 상황에서 Hall Sensor를 대체하여 회전수를 Conut하는 방법이 필요 하였다. BEMF(역기전력)을 이용한 Zero Crossing 방법이 이를 대체 하였지만, Motor의 전기적인 특성 편차 등에 안정된 control이 안되어서, Motor를 관리하는 방법으로 진행되어 왔다. 이것은 생산 Loss로 이어져서 Hall Sensorless의 장점을 훼손하게 되었다..본 논문에서는 이러한 Sensorless Type Spindle Motor의 문제점에 대해 Common 단자를 이용하여 안정된 제어 방법을 제안 한다. less Type의 문제점인 초기 기동 문제를 Common 단자를 이용하여 안정되게 Spindle motor를 Control 하는 방법에 대해 연구 하고자 한다.