• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2769-2774
• /
• 2010

In this paper, we have proposed sideband injection locking method, heterodyne technique, to generate millimeter-wave signal. Microwave signals in cellular broadband mobile communication networks and distributed networks can favorably be generated and distributed by optical techniques. In principle, these techniques have already been investigated for optical control of phase-array antennas, characterization of photo-detector and phase locking of millimeter-wave oscillators and now being applied to wireless communications. The generation and transmission of millimeter-wave radio signals by optical means is of interest for future pico-cell broadband mobile communication system, especially for systems operating at frequencies of tens of GHz applicable to LMDS. We experimented and analysed the generation of millimeter wave signal.

• Korean Journal of Veterinary Pathology
• /
• v.7 no.1
• /
• pp.17-21
• /
• 2003

From February to September in 1996, a lot of blind cattle were reported in Dangjin Area of Chungnam Province. Blindness were observed in the 143 calves of the 1,496 calves from 79 farms. Blind cattle were found only in the farms where green pasture was not fed. After administration of vitamin A as the type of feed additives and parenteral injection, the blindness cases were not occurred in those farms. Both pupils were totally dilated with the absence of pupillary light reflex in all blind cattle. In the ophthalmoscopic examination, the fundus revealed multi focal linear white mottling which was more severe in nontapetal fundus than tapetal fundus. Serum vitamin A concentration was as low as 4.1 ,$\mu\textrm{g}$/dl in the calves of the affected farms. Narrowing of optic foramen, retinal degeneration and optic disc atrophy were shown in pathological findings.

• Environmental Analysis Health and Toxicology
• /
• v.17 no.2
• /
• pp.141-145
• /
• 2002

Benfuresate의 잔류분석을 위해 GC-FPD(S-mode)를 이용하여 분석조건을 설정 중 열적 불안정으로 인해 열분해 산물과 모 화합물이 혼재됨이 확인되었다. 가스크로마토그라프를 이용한 열분해의 주된 요인은 주입구의 온도와 주입구내의 기화 정도인 것으로 판단되었으며, 주입구를 Chauhan과 Debre 가 고안한 on-column으로 교체 후 분석한 결과 분해산물이 없는 단일 봉우리의 크로마토그램을 얻을 수 있었고, 절대량으로 0.6-4ng의 정량 범위 내에서 유의성 높은 검량선을 얻을 수 있는 주입구 온도는 20$0^{\circ}C$였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9A
• /
• pp.704-711
• /
• 2009

In this paper, we report the results of the field trial test of 1GbpsX16channels Injection locking FP-LD based WDM-PON system which could guarantee 40Mbps minimum bandwidth per subscriber, We have confirmed the system reliability, also verified that the system could reliably deliver the service such as internet, VoD through the systems during the field trial test.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.6
• /
• pp.76-81
• /
• 2021

A plastic noise barrier is a structure installed to minimize noise, and it is composed of the main plate, sound-absorbing plate, and sound-absorbing material. Plastic noise barrier structures have several advantages compared to other products, such as light weight, anticorrosion, durability, easy assembly, rapid construction, and low costs. In this study, the main and sound-absorbing plates were manufactured through extrusion molding, and the sound-absorbing plate was finished with a press to improve the conventional injection molding. Extrusion molding dies and punch dies were designed, and a profile extrusion-molding system was developed. Thus, inexpensive and efficient sound-absorbing and main plates can be produced, and the noise barrier structure can be assembled rapidly. Additionally, a noise barrier structure with extended service life and excellent quality can be constructed by creating uniform free space to accommodate increased temperatures after assembly and installation.

• CELLMED
• /
• v.13 no.12
• /
• pp.47.1-47.8
• /
• 2023

Objective: A case report on the improvement of symptoms in an osteoporosis patient using ortho-cellular nutrition therapy Methods: Currently a 70 years old Korean woman was diagnosed with osteoporosis in her late 50s around 2010 and continued to receive injection treatments once every three months. Her T-score did not improve, and fractures continued to occur in the ankles, wrists, shoulders, ribs, etc., even from light impacts. Results: The patient underwent an osteoporosis test in February 2019, which resulted in an average T-score of -2.5 or less, equivalent to being diagnosed with osteoporosis. OCNT has been performed since May 2019 (late 60s), and in the test received in April 2020, the T-score value improved to over -2.5 and was determined normal at the hospital. Since then, OCNT continued without any further injection treatments. Unlike before, even when she fell hard, she only suffered bruises without fractures, and no additional fractures have occurred. Conclusion: OCNT may help patients with similar problems relieve symptoms and recover.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.99-106
• /
• 2012

Today, the typical web hacking attacks are cross-site scripting(XSS) attacks, injection vulnerabilities, malicious file execution and insecure direct object reference included. Web hacking security systems, access control solutions, access only to the web service and flow inside but do not control the packet. So you have been illegally modified to pass the packet even if the packet is considered as a unnormal packet. The defense system is to fail to appropriate controls. Therefore, in order to ensure a successful web services diagnostic system development is necessary. Web application diagnostic system is real and urgent need and alternative. The diagnostic system development process mu st be carried out step of established diagnostic systems, diagnostic scoping web system vulnerabilities, web application, analysis, security vulnerability assessment and selecting items. And diagnostic system as required by the web system environment using tools, programming languages, interfaces, parameters must be set.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.4
• /
• pp.3-10
• /
• 2007

In this paper, we proposed the methodology for security testing using block-based file fault injection. When fault is inserted into software, we consider the format of file in order to efficiently reduce the error that is caused by mismatch of format of file. The Vulnerability the methodology focuses on is related to memory processing, such as buffer overflow, null pointer reference and so on. We implemented the automatic tool to apply the methodology to image file format and named the tool ImageDigger. We executed fault-injection focused on WMF and EMF file format using ImageDigger, and found 10 DOS(Denial of Service) in Windows Platform. This methodology can apply to block-based file format such as MS Office file.

• Journal of Embryo Transfer
• /
• v.28 no.3
• /
• pp.169-175
• /
• 2013

Recently, the transgenic animal production technique is very important for the production of bio-parmaceutical as animal bio-reactor system. However, the absence of survival evaluation in vitro produced transgenic embryos has been a problem of the low productivity of transgenic animal because of absent of pre-estimate of pregnancy after transgenic embryos transferred into recipient. Therefore, this study is conducted to improve efficiency of transgenic cattle production by improving the non-surgical embryo transfer (ET) method. Transgenic bovine embryos were produced by injection of feline immunodeficiency virus enhanced green fluorescent protein (FIV-EGFP) lentiviral vector into perivitelline space of in vitro matured MII stage oocytes, and then in vitro fertilization (IVF) was occured. Normal IVF and EGFP expressing blastocysts were transferred into recipients. Results indicated that 2 expanded blastocysts (34.7%) transferred group showed significantly (P<0.05) higher pregnancy rate than 1 expanded blastocyst (26.8%) transferred group. In case of parity of recipient, ET to heifer (34.9%) showed significantly (P<0.05) higher pregnancy rate than ET to multiparous recipient (21.2%). However, there are no significant differences of pregnancy rate between natural induced estrus and artificial induced estrus groups. Significantly (P<0.05) higher pregnancy rate was obtained from recipient group which have normal corpus luteum with crown group (34.8%) than normal corpus luteum without crown (13.6%). Additionally, treatment of $100{\mu}g$ Gn-RH injection to recipient group (38.6%) 1 day before ET significantly (P<0.05) increase pregnancy rate than non- Gn-RH injection to recipient group (38.6%). We also transferred 2 EGFP expressing expanded blastocysts to each 19 recipients, 7 recipients were pregnant and finally 5 EGFP transgenic cattle were produced under described ET condition. Therefore, our result suggested that transfer of 2 good-quality expanded blastocysts to $100{\mu}g$ of Gn-RH injected recipient which have normal corpus luteum with crown is feasible to produce transgenic cattle.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.5
• /
• pp.1-8
• /
• 2010

Clients require easy to use of product and operating and industry safety according to the change of a market and a factory. For overcoming it, this paper developed controller of take-out robots that take high speed and superprecision and supplement a week point as use the system based on network. development controller classify teaching pendant and center server PC. Center server PC service the information about all process to supervisor. Teaching pendant is the bridge that service various faculties such as control, user recognition, metallic pattern operation to the user using injection molding. The controller development for taking out injection molded body classify software and hardware. The development of software is divided into three step which is application program, user interface and device driver. the simple device driver is not classified and included in application program. The hardware induce the touch panel and wireless network and construct the effective process control and internet connection. The inject ion cycle of existing system was five second but advanced system has the inner four cycle, process efficiency and product operation through wireless network.