• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.6
• /
• pp.623-641
• /
• 2020

About 5 km length of tunnels were constructed by mechanized tunnelling method using closed type shield TBM. In order to avoid construction delay problems for ensuring timely electricity transmission, it is necessary to increase the prediction accuracy of the excavation process involving machines according to rock mass types. This is important to corroborate the project duration and optimum operation for various considerations involved in the machine. So, full-scale tunnelling tests were performed for developing the advance rate model to be appropriately used for 3.6 m diameter shield TBM. About 100 test cases were established and performed using various operational parameters such as thrust force and rotational speed of cuttterhead in representative uniaxial compressive strengths. Accordingly, relationships between normal force and penetration depth and, between UCS and torque were suggested which consider UCS and thrust force conditions according to weathered, soft, hard rocks. Capacity analysis of cutterhead was performed and optimum operational conditions were also suggested based on the developed model. Based on this study, it can be expected that the project construction duration can be reduced and users can benefit from the provision of earlier service.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.623-635
• /
• 2018

In order to study the mechanical behavior of shield tunnel segments during assembly stage, the in-situ tests and FDM numerical simulation were conducted based on the Foguan Shiziyang Tunnel with large cross-section. Analysis for the load state of the assembling segments in different assembly steps as well as the investigation for the changing of inner forces and longitudinal stress of segments with assembling steps were carried out in this paper. By comparing the tested results with the simulated results, the conclusions and suggestions could be drawn as follows: (1) It is the most significant for the effects on axial force and bending moment caused by the assembly of adjacent segment, followed by the insertion of key segment while the effects in the other assembly steps are relative smaller. With the increasing value of axial force, the negative bending moment turns into positive and remains increasing in most monitored sections, while the bending moment of segment B1and B6 are negative and keeping increasing; (2) The closer the monitored section to the adjacent segments or the key segment, the more significant the internal forces response, and the monitored effects of key segment insertion are more obvious than that of calculation; (3) The axial forces are all in compression during assembling and the monitored values are about 1.5~1.75 times larger than the calculated values, and the monitored values of bending moment are about 2 times the numerical calculation. The bending moment is more sensitive to the segments assembly process compared with axial force, and it will result in the large bending moment of segments during assembling when the construction parameters are not suitable or the assembly error is too large. However, the internal forces in assembly stage are less than those in normal service stage; (4) The distribution of longitudinal stress has strong influence on the changing of the internal forces. The segment side surface and intrados in the middle of two adjacent jacks are the crack-sensitive positions in the early assembly stage, and subsequently segment corners far away from the jacks become the crack-sensitive parts either.

• Journal of Korea Multimedia Society
• /
• v.1 no.1
• /
• pp.45-55
• /
• 1998

In the tele-medical system, the broadband network for multimedia telecommunication and the multimedia terminal equipment for the remote access of the tele-medical information are essential. Especially, the tele-medical terminal equipment should provide the multimedia GUI environment in order to support the similar medical process by the tele-medical system. In this paper, we present a multimedia GUI (Graphic User Interface) for a Multimedia Tele-Medical System (TeleMedi_GUI) based on ATM/B-ISDN. In the tele-medical system, one workstation is used for the multimedia data server that is supporting multiple client terminals that are connected by the ATM network. The client terminals are based on Multimedia Personal Computers, and provide the remote access environment of the tele-medical database. We also developed the remote access protocols among the clients and the server to access multimedia medical information of the multimedia server. With using the TeleMedi_GUI, the doctors can examine and treat patients efficiently, using image data like X-ray/CT and voice data such as the S-ray diagnosis. The result of this paper can be applied to the following areas: 1) the implementation of the advanced medical service system interconnecting the small-scale health center and general hospitals, 2) the development of a fully computerized medical information system within the hospital.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.478-482
• /
• 2006

The domestic enterprises in order to secure the freshness location of market from the international competition which is keen are propelling a price and a quality high position strategy steadily. It is put in competitive situation with the overseas enterprises and even from construction industry it follows in construction market opening and there is not another idea to the research the management strategies, directions and focus competitive elements of the enterprise against, what it sees consequently and to rise to the priority where the competitive power reinforcement of the enterprise is important, it becomes. Competitive power of like this enterprise for a reinforcement the technique which induces a big interest 6 Sigma is technique from the many companies. 6 sigma preceding researches of manufacturing and service industry the fact that it is accomplished with the object which will carry most. The research which relates with construction industry is staying to an introduction of 6 sigma the investigation phase, the actual introduction introduces and "S" construction there is not only a possibility against the application result of having a limit because it is applying. It is like that but like referring to a minute description for the international competitive power security which it follows in the change which market environment is sudden 6 sigma the introduction will judge, indispensability development of the logical propriety against hereupon and it will reach and it verifies the question investigation for to lead, 6 sigma of the construction companies it confirms the application possibility and presents the propulsion model as 6 sigma the fact that overcoming the limit characteristic of that introduction application as objective of sample research means it will do.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.30-38
• /
• 2017

Recently, research on the development of a composite slab system for shorting the construction period by simplifying the process by omitting the form work and the reinforcement placing is underway. The purpose of this study is to evaluate the long-term behavior of a simplified slab system that replaces the form work and tensile reinforcement using structural deck-plate and replaces the temperature reinforcement using steel fiber reinforced concrete. In the conventional composite deck-plate slab method, w.w.f is generally used for crack control by drying shrinkage. But previous research results by various researchers were pointed out it is not effective to control the shrinkage and temperature cracking. In this study, the long-term cracking and structural behavior of steel fiber reinforced deck plate slab specimen with two continuous spans constructed under typical load conditions were evaluated. Experimental results showed that the number and width of long-term cracks decreased remarkably in the simplified slab specimen, and the deflection was also decreased compared with conventional RC slab specimen. However, in the continuous end of the slab where the negative moment is applied, it is analyzed that reinforced details are necessary to control the crack width in the service load and to recover deflection at load removal.

• Korean Journal of Food Science and Technology
• /
• v.41 no.3
• /
• pp.258-264
• /
• 2009

The principal objective of this study was to estimate the measurement uncertainty associated with determination of deoxynivalenol (DON), a mycotoxin generated by Fusarium strain, in food. In service of this goal, wheat as a food matrix was analyzed via high performance liquid chromatography-ultraviolet (HPLC-UV) detection using an immunoaffinity column for clean-up. The uncertainty sources in the measurement process were identified by sample weight, final volume, and sample concentration in extraction volume with components including standard stock solution, working standard solution, 5 standard solutions, calibration curve, matrix, and instrument. The expanded uncertainty for DON at a concentration of 300 ${\mu}g/kg$ was estimated as 71.62 ${\mu}g/kg$ using a coverage factor of two, which provides a confidence level of approximately 95%. The most influential component in the uncertainty sources was the recovery of the wheat matrix, followed by the calibration curve. These results indicate that all efforts may be directed toward reducing the uncertainties of the recovery of the wheat matrix and the calibration curve to obtain a reliable HPLC-UV method for DON analysis in wheat.

• Journal of the Korean Society of Earth Science Education
• /
• v.9 no.3
• /
• pp.276-291
• /
• 2016

This study is to develop a valid and reliable instrument for measuring students' creative engineering problem solving propensity. The creative engineering problem solving is operationally defined in this study as a creative problem solving skill in an engineering context. To develop the instrument, first we define seven common constructs between engineering problem solving skill and creative problem solving skill through an intensive literature review; motivation, context, personal character, engineering design, engienering habits of mind, understandings of engineering and engineers, communication skill, and collaboration skill. Based on the seven constructs and the face validity test conducted by two in-service science teachers and 4 experts in science education research, 40 preliminary items were developed. Then the preliminary instrument was implemented in a science gifted highschool to measure the reliability of the instrument. From the 40 items, 34 items were selected through the initial reliability test by Cronbach's ${\alpha}$(>.75). Finally through the three times of factor analysis process, 28 items in five construct categories were selected; motivation (3 items), engineering design (6 items), engineering habits of mind (9 items), understandings of engineering and engineers (4 items), communication and collaboration skill (6 items). The factor analysis result showed that the reliability of each construct category was between .733 to .892., meaning that the instrument is reliable in terms of the higher structural validity (each item is categorized in an appropriate construct category). We expect that the creative engineering problem solving propensity instrument developed in this study can be used in various contexts for STEAM education research as a reliable and valid instrument.

• Health Policy and Management
• /
• v.28 no.3
• /
• pp.195-196
• /
• 2018

The Korean Academy of Health Policy and Management (KAHPM) has shown remarkable achievements in the field of health policy and management in Korea for the last 30 years. The KAHPM consists of experts in various fields of health policy and management, and has been the leading academic discussion forum for health policy agendas of interest to the public. Health Policy and Management (HPM), the official journal of the KAHPM, published the first issue of volume 1 in October, 1991 and is publishing the second issue of volume 28 as of 2018. Currently, it is one of Korea' main journals in the field of health policy and management. HPM has published a special issue in commemoration of the 30th anniversary of the KAHPM. The HPM invited authors, including former presidents of the KAHPM and current board members, to write about main issues in health policy and management. Although the HPM tried to set up an invited author on all subjects in the health policy and management field, 19 papers are published, that completed the peer review process by August, 2018. The authors of the special issue of the 30th anniversary of the KAHPM include six former presidents, a senior professor, and 12 board members. The subjects of this issue are reform of the healthcare delivery system, health insurance and medical policy, reform of health system governance, the role of National Health Insurance Service (NHIS), the Korea Institute for Health and Social Affairs (KIHASA) and the National Evidence-based healthcare Collaborating Agency (NECA), ethical aspects of health policy change, regional disparities of healthcare, healthcare accreditation, new healthcare technology evaluation system, globalization of the healthcare industry, the epidemiological investigator system, the quarantine system, safety and disaster, and official development assistance. There are some remaining topics to deal with for the KAHPM: aged society, anti-smoking, non-infectious disease, suicide, healthcare resources, emergency medical care, out-of-pocket money, medical fee payment system, medical aid system, long-term care insurance, industrial accident compensation insurance, community-centered health welfare system, and central government and local government of health. The HPM will continue to publish review articles on the main topics in health policy and management. This is because the KAHPM, which has been the leading academic society of Korea's health policy and management for the last 30 years, feels responsible for continuing its mission for the next 30 years.

• Journal of Nutrition and Health
• /
• v.41 no.8
• /
• pp.887-899
• /
• 2008

Recently the Ministry of Health and Welfare, Republic of Korea, announced the “Dietary Guidelines for Korean Adults (DGKA)”, which includes ten Dietary Goals, six Dietary Guidelines, and twenty-three Action Guidelines. DGKA are developed as the revision of the 2003 Dietary Guidelines for Koreans, targeting adult population. Dietary Guidelines are developed for general purpose as well as for different age groups. They are revised periodically to accommodate changes in diet and health problems of the population. The process of developing new DGKA can be summarized as 1) selection of focus areas, 2) analysis and review of available data for each area selected, and 3) derivation of guidelines based on the analyzed data, and 4) finalizing the guidelines after open discussions among the experts and general public. Five focus areas were selected by examining the Nutrition Goals of the Health Plan 2010 of Korea, soliciting proposals from the experts in the related fields, and reviewing existing and international guidelines. Five areas selected were 1) adequate intake of nutrients and foods, 2) balance of energy intake and physical activities, 3) alcohol intake, 4) food security and nutrition service, and 5) food safety. Adequacy of nutrient and food intakes of the Korean adult population was assessed using 2005 Korea National Health and Nutrition Examination Survey (KNHANES) data. Newly developed Dietary Reference Intakes for Koreans were used as reference values to assess the prevalence of inadequacies and excesses in nutrient intakes. Energy balance was examined with energy intake of 2005 KNHANES survey and results of physical activity questionnaire in the survey. Alcohol intake was also examined using 2005 KNHANES results of dietary intakes as well as the results of questionnaire survey on alcohol intakes. Food security, nutrition services, and food safety were analyzed using various government data and published results on the issues. Ten Dietary Goals and six Dietary Guidelines were developed after data analysis and were subjected to reviews of experts and general public. The final DGKA are: 1) Eat a variety of foods from each food group, 2) Increase physical activity and maintain healthy weight, 3) Eat proper amount of clean foods, 4) Avoid salty foods and try to eat foods with bland taste, 5) Avoid foods with high fat contents and deep-fried foods, and 6) When you drink alcohol, limit the amount. Twenty-three action guidelines are developed in order to achieve these guidelines in actual diet and life among the population. The government is disseminating the guidelines with “337” slogan and emblem. “337” indicates everyone should practice “3” guidelines of promoting good eating practice, “3” guidelines to limit or decrease in your diet, and you should practice them for “7” days a week. The guidelines will be useful in promoting healthy food habits and good nutritional status which will result in decrease nutrition related health problems in Korea.

• Journal of Aquaculture
• /
• v.6 no.2
• /
• pp.71-87
• /
• 1993

Two forms of sea mustard, Undaria Pinnatifida were cultured in order to compare the morphological characteristics and the efficiency of production. U. Pinnatifida f. distans was collected from Wando, Korea and U. Pinnatifida f. typica was transplanted from Sanriku, Japan. The latter form grew faster in length and weight than the former. Maximum growth was shown in early April for both forms, and the growth rates decreased after this. Absolute growth rates between the two forms were quite different. Average total lengths at the harvest season was 161.1cm in U. Pinnatifida f. distans and 183.5 em in U. Pinnatifida f. typica and average weights of those two forms were 1,003.4g and 1,314.6g, respectively. The weight of available parts for the salting process of the two forms were 734.8g and 968.5g, respectively. The rates of total length versus the length of the available part of the two forms were $76\%$ and $83\%$, respectively and those of the total length versus weight of the available part of them were $43.8\%$ and $52.7\%$, respectively. The results of this study suggest that the U. pinnatifida f. typica had more available part per unit weight than that of the U. pinnatifida f. distans for the efficiency of salt processing.