• Structural Engineering and Mechanics
• /
• 제22권5호
• /
• pp.541-562
• /
• 2006

This paper compares the performance of axially loaded concrete filled steel tube (CFST) columns cast using a conventionally vibrated normal concrete (NC) and a novel self-consolidating concrete (SCC) made with a new viscosity modifying admixture (VMA). A total of sixteen columns with a standard compressive strength of about 50 MPa for both SCC and NC were tested by applying concentric axial load through the concrete core. Columns were fabricated without and with longitudinal and hoop reinforcement (Series I and Series II, respectively) in addition to the tube confinement. The slenderness of the columns expressed as height to diameter ratio (H/D) ranged between 4.8 and 9.5 for Series CI and between 3.1 and 6.5 for Series CII. The strength and ductility of SCC columns were found comparable to those of their NC counterparts as the maximum strength enhancement in NC columns ranged between 1.1% and 7.5% only. No significant difference in strain development was found due to the presence of SCC or NC or due to the presence of longitudinal and hoop reinforcement. Biaxial stress development in the steel tube as per von Mises yield criterion showed similar characteristics for both SCC and NC columns. The confined strength ($f^{\prime}_{cc}$) of SCC was found to be lower than that of NC and $f^{\prime}_{cc}$ also decreased with the increase of slenderness of the columns. Analytical models for the prediction of confined concrete strength and axial strength of CFST columns were developed and their performance was validated through test results. The proposed models were found to predict the axial strength of CFST columns better than existing models and Code based design procedures.

• 조형예술학연구
• /
• 제2권
• /
• pp.239-293
• /
• 2000

The paper aims to study how to describe the rigorous position on which semantic elements are laid, within the visual space. This purpose is, first of all, for the construction of visual syntactical semantics of the visual space. For this aim, the preliminary research begins with some definitions on : 1) visual space, visual design, visual syntactical semantic meaning, 2) position, sequence of position, 2-dim. sequence of position, and 3) 2-dim. numerical series of position, harmonious dynamic values. Here, The main issue is to define the position in general. To solve this problem, the researcher surveyed the positions on which the sets of pixemes are set up. The results are as follows ; 1. As far as the positions in visual space are concerned, they are the possible locations permitted in the visual patches. They are not the factual but the possible positions. 2.The position value that the sequential point has is not arithmetical but harmonious-dynamic, for it is not permitted for its own sake, but for the person, that is to say, for the viewer's visual perception. 3. The harmonious-dynamic value of positional sequence can be composed of the 2-dimensional successive numerical series which is, in turn, composed of the primordial 3 values x0, $\mu0$, y0. Here, the $\mu0$ is the harmonious mean value of x0 and y0. The x0 and y0 are, therefore, of the mutual dynamic relationship. 4. From this, the 2-dim general $\Delta-TABLE$ of the numerical series of position in visual design could be acquired through development of the primordial 3 values into the $X_i,\;Y_i$, orbit values.

• 한국실내디자인학회논문집
• /
• 제21권5호
• /
• pp.145-152
• /
• 2012

Since 1966 when James Turrell completed his studies on Art, he has been working on the consistent theme of Art. For the 46 years of time, site contexts, scales, methods of light have been changed and they made Turrell's unique 'project series'. Each series has different spatial, visual-perceptual forms and characteristics from other series. The differences were caused by the given situations, but also Turrell intentionally pursued it. However, there are essential theme of art that has not changed in most of Turrell's projects. Target of this paper is to study the unchanged theme as well as the differences. The study starts with three questions: first, what is the geometrical space composition?, second, what is the visual-perceptual phenomenon?, third, what is the hidden consistent theme? This research focuses on three case projects: Wedgework, Space Division Constructions, Skyspaces. These project series are in between the early small object-like installations and the late mega-scale outdoor projects. The study found that geometrical space composition has important role to give visual-perceptual dynamism to the viewer. The phenomenological perception is connected to the questions of relationship between human and space, ultimately human and the world. Although the Merleau-Ponty's philosophy has been related to the work of Turrell in various previous studies, Cartesian 3-dimensional geometry has also crucial role to experiment a viewer's perceptual boundaries. Image of infinity is another aspect of three cases, especially Space Division Constructions and Skyspaces. Through these structure, Turrell's work lead to an ultimate question of meaning for human existence in infinite space. It is hoped that this paper is helpful for Architecture and Interior design field in which light and space are essential.

• 산업공학
• /
• 제17권spc호
• /
• pp.69-78
• /
• 2004

This paper presents a simulated algorithm(SA) for the optimal reliability design problem of a series system with multiple component choices incorporated at each subsystem. The objective of the problem is to maximize the system reliability while satisfying some constraint on system budget. The problem is formulated as a nonlinear binary integer programming problem and characterized as an NP-hard problem. The SA algorithm is developed by introducing some solution-improvements methods. Numerical examples are tested and the results are compared. The results have demonstrated the efficiency and the effectiveness of the proposed SA algorithm.

• 대한전기학회논문지
• /
• 제39권8호
• /
• pp.828-835
• /
• 1990

A new state feedback control scheme is proposed to improve the stability and dynamic performances of the series resonant converter (SRC). The proposed scheme can be easily implemented without speed limitation. Design parameter of the proposed control is the ratio of the state feedback gains. A closed loop dynamic modeling for the SRC with the proposed control law is derived. Parametric curves which can be used to select the design parameter in the control system are presented. The experimental results show that the excellent dynamic performance of the converter can be obtained by properly selecting the design parameter. The results are further compared with both the theoretical analysis and the frequency control.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.235-238
• /
• 2006

As the screen size of LCD TV increases, an external electrode fluorescent lamp (EEFL) has been suggested to be applicable as backlight source for LCD TV. Since the EEFL has non-linear characteristics, which makes the analysis and design complicated. In this paper, the characteristics of the EEFL are investigated and a full-bridge RLC series-resonant inverter is analyzed and designed for EEFL backlight of 32-inch LCD TV. Finally, the experimental results are shown to validate the analysis and design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2085-2087
• /
• 1998

This paper presents the design method of a dimming electronic ballast for fluorescent lamps using a frequency control IC, and investigates the effects of circuit variables on its dimming characteristics. It is shown that effective dimming is possible with IC IR2151 for frequency control, and this leads to a feasible design of more smaller and cheaper dimming ballast. Five ballasts different in the values of the series inductance and capactance are designed, and their dimming characteristics are compared. As the result, the dimming range becomes more broader as the series inductance gets smaller and the capacitance larger. Thus appropriate selection of the values of L and C should be made according to the types of application site.

• 전자공학회논문지B
• /
• 제29B권10호
• /
• pp.19-26
• /
• 1992

Generally, When we calculate notch angle to eliminate some selected harmonics using PWM inverter, we put the previously analysed notch angle formed by look-up table into memory, or perform the program to claculate notch angle iteratively with Fourier series. But, these methods are very difficult to control the system in real-time. Now, in this paper, we propose a new method to calculate notch angle using Walsh series, design real-time logic circuits which can be applied in 3 phase circuits and make one chip to reduce complexity and size of circuits using VLSI design technique.

• 전기의세계
• /
• 제28권9호
• /
• pp.51-59
• /
• 1979

The forming and design method of D.C thyristor chopper circuit for DC Series motor control is suggested, ard the computation method of thyristor commutaing element's, value which makes it all the more important, is possible. Also the trigger circuit was dealt with. In this paper, in order to control the duty cycle, the duty time is kept on constancy and variable chopping frequency was adopted. By above mentioned circuit design method, the D.C thyristor chopper circuit was implemented and tested. In this circuit, the result of D.C motor control was good and reliable. The relation between the $K_{d}$ and the ratio of input-output current, or the characteristic of speed was varied lineary at the range 0.1 ~ 0.9 of duty cycle. This confirms the fact that D.C to D.C power conversion which is the merit of chopper control is operated most likely a transformer.ormer.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.886-898
• /
• 2015

The design feasibility of a micro unidirectional DC transmission system based on an input-parallel output-parallel (IPOP) converter is analyzed in this paper. The system consists of two subsystems: an input-parallel output-series (IPOS) subsystem to step up the DC link voltage, and an input-series output-parallel (ISOP) subsystem to step down the output voltage. The two systems are connected through a transmission line. The challenge of the delay caused by the communication in the control system is addressed by introducing a ring communication structure, and its influence on the control system is analyzed to ensure the feasibility and required performance of the converter system under practical circumstances. Simulation and experiment results are presented to verify the effectiveness of the proposed design.