• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.533-541
• /
• 2011

The redundant operation of a parallel AC to DC converter via a serial communication bus is presented. The proposed system consists of three isolated CUK power factor correction modules. The controller for each converter is a dsPIC30F6010 microcontroller while a RS485 communication bus and the clock signal are used for synchronizing the data communication. The control strategy of the redundant operation relies on the communication of information among each of the modules, which communicate via a RS485 serial bus. This information is received from the communication checks of the converter module connected to the system to share the load current. Performance evaluations were conducted through experimentation on a three-module parallel-connected prototype, with a 578W load and a -48V dc output voltage. The proposed system has achieved the following: the current sharing is quite good, both the transient response and the steady state. The converter modules can perform the current sharing immediately, when a fault is found in another converter module. In addition, the transient response occurs in the system, and the output voltages are at their minimum overshoot and undershoot. Finally, the proposed system has a relatively simple implementation for the redundant operation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1013_1014
• /
• 2009

In this paper, the electrical interfaces used in between COMS satellite bus and Ka-band communication payload are analyzed to verify the robustness of data bus. The purpose of the serial data bus of satellite is to allow serial data transfer between one bus controller or source equipment to several user terminals or slave equipments. A serial data bus in COMS satellite is mainly used for Channel Amplifier and Digital Control Unit of Ka-band Payload.

• 한국통신학회논문지
• /
• 제31권10A호
• /
• pp.996-1002
• /
• 2006

USB(Universal Serial Bus)는 최근 컴퓨터시스템에서 가장 인기 있는 인터페이스 중의 하나인데 이를 보다 확대하여 사용 시 즉, 다수의 디바이스들이 서로 연결되는 댁내망을 구성할 때는 버스대역을 시분할 다중화(TDM, Time Division Multiplexing) 방식으로 사용하는 USB의 특징상 버스대역의 병목현상을 초래하게 되는 데 이러한 상황을 보다 효율적으로 대처할 수 있는 버스 대역 사용방안을 제안한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2499-2502
• /
• 2005

Universal Serial Bus (USB) is one of the most popular communication interfaces. When USB is used in more extended range, especially configuring home network by connecting multiple digital devices each other, USB interface uses the bandwidth in the way of Time Division Multiplexing (TDM) so that the bottleneck of bus bandwidth can be brought under the heavy traffic. In this paper, the more effective usage of bus bandwidth to overcome this situation is introduced. Basically, in order to realize the system for transferring real-time moving picture data among digital information devices, we analyze USB transfer types and descriptors and introduce the method to enhance the detailed performance of isochronous transfer that is one of USB transfer types.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.195-197
• /
• 2006

In this paper, an interface unit is designed to efficiently monitor transmission data in Controller Area Network(CAN)-based control systems. The CAN uses a serial multi master communication protocol that efficiently supports distributed real-time control with a very high level of data integrity, and communication speeds of up to 1Mbps. The interface unit is composed of a DSP controller which collects data on the CAN bus and transfers data to a personal computer via serial communication to save and display of interesting signals. The experimental system consists of three DSP controllers which represent electronic control units of a vehicle, an interface unit for analysing the data on the bus, and a graphic monitoring program coded on the Windows platform. The validity and the effectiveness of the proposed simple type of CAN interface unit are shown through the experimental results.

• 전기전자학회논문지
• /
• 제26권3호
• /
• pp.437-444
• /
• 2022

본 논문에서는 차량용 반도체에서 CRC 검사를 통해 전송 오류를 검출할 수 있는 SPI 버스 및 I2C 버스를 제안한다. 차량용 반도체에서는 전송에 오류가 발생하여 잘못된 값이 전달되는 경우 치명적인 결과가 발생한다. LIN 버스, CAN 버스와는 다르게 SPI와 I2C 등 구조가 간단한 직렬 인터페이스에서는 전송 오류를 검출하는 방법이 없기 때문에 직렬 인터페이스에 적용할 전송 오류 검출방법을 제시할 필요가 있다. 본 논문에서는 SPI 및 I2C의 통신 프로토콜에 CRC 검사를 사용하여 전송 오류를 검출하는 방법을 제시하고 이를 FPGA로 설계하여 효과적으로 오류를 검출할 수 있음을 검증하였다.

• ETRI Journal
• /
• 제32권5호
• /
• pp.713-721
• /
• 2010

E-textile technology has earned a great deal of interest in many fields; however, existing wearable network protocols are not optimized for use with conductive yarn. In this paper, some of the basic properties of conductive textiles and requirements on wearable personal area networks (PANs) are reviewed. Then, we present a wearable personal network (WPN), which is a four-layered wearable PAN using bus topology. We have designed the WPN to be a lightweight protocol to work with a variety of microcontrollers. The profile layer is provided to make the application development process easy. The data link layer exchanges frames in a master-slave manner in either the reliable or best-effort mode. The lower part of the data link layer and the physical layer of WPN are made of a fabric serial-bus interface which is capable of measuring bus signal properties and adapting to medium variation. After a formal verification of operation and performances of WPN, we implemented WPN communication modules (WCMs) on small flexible printed circuit boards. In order to demonstrate the behavior of our WPN on a textile, we designed a WPN tutorial shirt prototype using implemented WCMs and conductive yarn.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.87-90
• /
• 2006

Nowadays, we can enjoy access to high speed network and advanced services of convergence between broadcasting and communication anywhere and anytime through a ubiquitous computing. So, now digital convergence devices come out constantly. These devices are required faster network environment for high speed data processing than before. In this paper, we describe the design of InfiniBnad network adapter, which is included two FPGA chipsets. When this adapter is installed to Digital Convergence Platform (DCP) network performance will be improved. The adapter includes 12channel serial ports for external communication and internally, uses PCI-Express bus. We have finished the test of high speed serial based network adapter through composing complete InfiniBand network and applied fabric management software. So, we have verified that it can be applied on DCP environment.

• 한국정보통신학회논문지
• /
• 제18권4호
• /
• pp.839-847
• /
• 2014

최근 컴퓨터 기술의 발전으로 웨어러블 컴퓨터 기술이 개발되고 있다. 이는 HCI (human-centric interface)기술과 유비쿼터스 컴퓨팅 기술을 기반으로 한다. 웨어러블 컴퓨터 시스템은 WiMedia PHY/MAC 기술과 결합된 USB 기술로 WUSB (wireless universal serial bus) 기술을 사용하여 구성할 수 있다. 본 논문은 U-Health 기능을 지원하는 무선 웨어러블 컴퓨터시스템을 구성하기 위해 WUSB기술과 WBAN (wireless body area networks) 기술을 결합한 통신시스템 구조에 초점을 맞추었다. 이를 위해 WBAN 망에서 WUSB 통신 구간을 할당하는 통신 구조를 제안한다. 제안하는 통신구조에서 WUSB 통신 구간은 WBAN Privated Period를 사용한다. 성능 평가에서는 WBAN 통신 점유율에 따른 WUSB 통신 수율을 이론적인 분석과 시뮬레이션을 통해 비교 분석하여 WUSB over WBAN 통신의 효율성을 평가하였다.

• 한국정보통신학회논문지
• /
• 제9권1호
• /
• pp.88-94
• /
• 2005

본 논문에서는 회전기의 위치에 대한 정보를 가지고 있는 Encoder와 정해진 경로(Serial Signal)를 통해 Data를 전송하거나 받고, DSP로 Data를 정해진 경로(Paralle Signal)를 통해 Data를 전송하거나 받는 기능을 가진 Receiver를 FPGA Design한 것이다. 동일 동작 Clock을 사용하지 않는 다른 System의 Serial Data 통신을 하는 경우, 새로운 헤더 검출 방법을 제시하여 Serial Data의 유효한 각 Bit의 정보를 얻기 위해서는 헤더 내의 Sync. Code를 해석하여 유효 Data의 길이를 찾을 수 있다. 또한 Receiver의 동작 주파수를 'clk_select' Port를 사용하여 내부 동작 주파수를 20MHz 또는 60MHz를 선택할 수 있다.