• 대한건축학회논문집:계획계
• /
• 제35권3호
• /
• pp.59-66
• /
• 2019

In recent years, urban regeneration is focused on smart and pedestrian oriented development utilizing various mobility technology. The characteristics of walkways needs to reflect such development orientations. This research is the first step to find an adequate slope for ramp replacing stairs and shared by pedestrians, personal mobilities and powered wheelchairs. It aims to check if ramps on a recommended degree of angle by general guidelines are more preferred than stairs and find out what make difference of such preferences. Two surveys were conducted at $9^{\circ}$ and $9.6^{\circ}$ ramps coexisted with stairs at sequential and parallel location. The study on the survey result found that the general evaluation of $9^{\circ}$ ramp was better than $9.6^{\circ}$ ramp but $9^{\circ}$ ramp was not preferred than stairs while $9.6^{\circ}$ ramps was preferred. The difference of preferences was related to characteristics of stairs. The stair with shorter tread and riser next to $9^{\circ}$ ramp was evaluated much better than stairs next to $9.6^{\circ}$ ramp. Therefore the research concludes that $10.0^{\circ}$ which many guidelines recommend for the maximum slop of a ramp was not adequate for a ramp to replace stairs as a preferred means of vertical circulation. In addition the research found that the preference was sensitive to moving direction and gender especially in regards to comfort of stairs and safety of ramp. Most pedestrians chose a means of vertical circulation based on its comfort but pedestrian's evaluation of safety was most different based on moving direction.

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.35-42
• /
• 2014

The influence of sine wave striated surface roughness on load carrying capacity of a bearing is studied for thin film effect of slider bearing. A Reynolds equation appropriate for slider bearing is used in this paper for analysis and it is discussed using finite difference method of central difference scheme. For a slider bearing with sine wave simple roughness form, several parameters such as pressure, load capacity and shear stress of the bearing can be obtained and also this results can be stored in sequential data file for latter analysis. After all, their distribution can be displayed and analyzed easily by using the matlab GUI technique. The parameters such as amplitude, number of waviness and slope of the surface are used for discussing the load carrying capacity of the rectangular bearing. The results reported in this paper should be applied to the other slider bearing such as rectangular or round embossed surface of slider bearing.

• Environmental Engineering Research
• /
• 제17권3호
• /
• pp.145-150
• /
• 2012

Pb-contaminated soil at a clay shooting range was analyzed by the sequential extraction method to identify metal binding properties in terms of detrital and non-detrital forms of the soil. Most of the metals in the soils existed as non-detrital forms, exchangeable and carbonate-bound forms, which could be easily released from the soil by a washing method. Therefore, the characteristics of Pb desorption for remediation of the Pb-contaminated soil were evaluated using hydrochloric acid (HCl) by a washing method. Batch experiments were performed to identify the factors influencing extraction efficiency. The effects of the solid to liquid (S/L) ratio (1:2, 1:3, and 1:4), soil particle size, and extraction time on the removal capacity of Pb by HCl were evaluated. Soil samples were collected from two different areas: a slope area (SA) and a land area (LA) at the field. As results, the optimal conditions at 2.8 to 0.075 mm of particle size were 1:3 of the S/L ratio and 10 min of extraction time for SA, and 1:4 of the S/L ratio and 5 min of extraction time for LA. The characteristics of Pb desorption were adequately described by two-reaction kinetic models.

• The Korean Journal of Ecology
• /
• 제10권3호
• /
• pp.119-127
• /
• 1987

On the east slope of the front ranges of the Colorado Rockies, USA, three species of Populus are distributed at different elevations from the Great Plains to the timberline. At elevations 1, 720m (P. sargentii), 2, 335m (P.angustifolia) and 3, 190m (P.tremuloides) chlorophyll cotents of leaves of thses dioecious trees were determined. Total chlorophyll content was in the range of 0.86-1.56mg/g leaf, increasing with elevation as a second-degree polynomial, and the peak content was estimated to be reached at about 2, 800m. Total chlorophyll content was greater in female than in male trees in the two higher elevation species, but not in P. sargentii, the low elevation species. Chlorophyll b content was greater than chlorophyll a content in the same two higher elevation species. The increase of chlorophyll b than to increase of chlorophyll a content. These phenomena appear to be the result of adaptation of these species to different environmental conditional at different elevation. Sequential distribution of plant populations on environmental gradients in such a way that variation in given plant characters paralell the environmental gradient must occur not only in ecotypes of a species, but also in different but closely related species.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.119-125
• /
• 2017

In this paper, the characteristics and load carrying capacity of square pocket surfaces on a slider bearing are discussed for the thin film effect by the square pocket slider bearing. To study the lubrication, a Reynolds equation is used in this paper for the analysis of the slider bearing characteristics with square pocket surfaces. For numerical analysis, the central differencing scheme finite difference method is used. In a slider bearing with square pocket surfaces, the simulation dependent parameters such as pressure and load carrying capacity of the bearing can be acquired from the independent parameters, the slope of the slider bearing and number of pockets on the upper slider. These results can be acquired by the programmed softwar,e and they can be analyzed and stored in a sequential data file for later analysis. Furthermore, their pressure and load capacity distribution can be displayed easily by using the developed program with the Matlab GUI.

• 정보과학회지
• /
• 제1권1호
• /
• pp.72-74
• /
• 1983

Traditionally, polynomials have been used to approximte functions with prescribed values at a number of points(called the knots) on a given interal on the real line. The method of splines recently developed is more flexible. It approximates a function in a piece-wise fashion, by means of a different polynomial in each subinterval. The cubic spline gas ets origins in beam theory. It possessed continuous first and second deriatives at the knots and is characterised by a minimum curvature property which es rdlated to the physical feature of minimum potential energy of the supported beam. Translated into mathematical terms, this means that between successive knots the approximation yields a third-order polynomial sith its first derivatives continuous at the knots. The minimum curvature property holds good for each subinterval as well as for the whole region of approximation This means that the integral of the square of the second derivative over the entire interval, and also over each subinterval, es to be minimized. Thus, the task of determining the spline lffers itself as a textbook problem in discrete computer programming, since the integral of ghe square of the second derivative can be obviously recognized as the criterion function whicg gas to be minimized. Starting with the initial value of the function and assuming an initial solpe of the curve, the minimum norm property of the curvature makes sequential decision of the slope at successive knots (points) feasible. It is the aim of this paper to derive the cubic spline by the methods of computer programming and show that the results which is computed the all the alues in each subinterval of the spline approximations.

• 지질공학
• /
• 제22권3호
• /
• pp.343-351
• /
• 2012

본 연구는 기존에 제안된 무한사면 안정해석식을 바탕으로 불포화토 내에 강우침투 시 지표로부터 시간에 따른 토층의 포화깊이비를 새로운 변수로 삽입하여 무한사면 안정해석 수정식을 제안하고자 하였다. 이를 위해 기존에 고려하지 못했던 시간에 따른 포화깊이비와 지표하 흐름 깊이의 개념을 새로이 도입하였으며, 유사동력학적 습윤지수 이론에서 도출되는 해석대상 지역의 유효상부기여면적, 지표하흐름 깊이, 포화깊이비를 계산하고, 이를 토대로 시간에 따른 포화깊이비를 반영한 무한사면 안정해석을 수행하도록 하였다. 이를 통해 실질적인 시간에 따른 강우의 변화양상과 사면 안전율 변화를 계산할 수 있게 되었다. 한편, 본 연구에서는 Park et al. (2011 a)가 실시한 불포화토 칼럼시험을 통한 강우침투 속도분석 결과를 바탕으로 본 연구에서 제안한 식을 이용하여 토층의 포화깊이비를 고려한 사면안정해석을 실시하였다. 이 해석을 통해 편마암 풍화토의 토층 내 강우 침투속도를 고려하여 포화깊이비가 변화함에 따른 안전율의 변화를 파악할 수 있었다. 해석결과에 의하면, 연속강우의 경우 안전율이 1.3 이하로 감소하는 시간이 강우강도 20 mm/h 조건에서 2.86 ~ 5.38시간이고, 강우강도 50 mm/h 조건에서는 1.34 ~ 2.92시간으로 나타났다. 반복강우의 경우, 안전율이 1.3 이하가 되는 시간은 강우조건별로 3.27 ~ 5.61시간으로 나타났다. 따라서, 토층 내 강우침투속도 차이에 따른 포화깊이비 변화를 고려한 무한사면의 안전율 변화 파악이 가능하였다.

• 한국수자원학회논문집
• /
• 제40권5호
• /
• pp.373-382
• /
• 2007

수로가 시작되는 지점의 정확한 위치를 찾는 것은 구릉지 사면상의 물의 동적거동으로 인하여 매우 어렵다. 이러한 목적을 위하여, 김주철과 김재한(2007)은 DEM을 이용한 경사와 면적 사이의 규모에 따른 거동특성에 따라 실제 유역내 수로망을 제시한 바 있다. 본 연구는 이들의 연구 성과의 연장으로서, 배수밀도와 수원유역의 기하학적 특성을 기반으로 하여 DEM으로부터 동정된 가설수로망의 신뢰성을 평가하여 보았다. 그 결과 경사-면적한계기준에 의한 가설수로망이 자연유역의 배수구조를 매우 잘 묘사하고 있음을 확인할 수 있었다. 또한 지형학적 동질성을 가진 지역내 수원유역의 형상들 사이에는 훌륭한 기하학적 상사성이 존재함을 추론할 수 있었다. 면적한계기준은 수원유역의 형상을 구속하여 왜곡된 배수구조를 야기할 수도 있었다. 그럼에도 불구하고 DEM으로부터 동정된 가설수로망들이 공간 채움 구조를 잘 표현하고 있는 점이 특히 주목된다.

• Fisheries and Aquatic Sciences
• /
• 제5권3호
• /
• pp.219-228
• /
• 2002

Based on the five-year (October 1992 through September 1997) Topex/Poseidon altimeter measurements, we describe the statistical characteristics of the eddy variability in the East Sea in terms of sea surface height anomaly, slope variability, and eddy kinetic energy (EKE). The sea surface height anomalies in the East Sea are produced with standard corrections from Topex/Poseidon measurements. In order to eliminate the high frequency noise in the sea surface height anomaly data, the alongtrack height anomaly data was filtered by about 40 km low-pass Lanczos filter based on Strub et al. (1997) and Kelly et a1. (1998). We find that there exists a distinct spatial contrast of high eddy variability in the south and low eddy energy in the north, bordering the Polar Front. In the northwestern area $(north\;of\;39^{\circ}N\;and\;west\;of\;133^{\circ}E)$ from the Polar Front where the eddies frequently appear, the EKE is also considerabel. The high kinetic energy in the southern East Sea reveals a close connection with the paths of the Tsushima Warm Current, suggesting that the high variability in the south is mainly generated by the baroclinic instability process of the Tsushima Warm Current. This finding is supported by other studies (Fu and Zlontnicki, 1989; Stammer, 1997) wh.ch have shown the strong eddy energy coupled in the major current system. The monthly variation of the EKE in both areas of high and low eddy variability shows a strong seasonality of a high eddy kinetic energy from October to February and a relatively low one from March to September. The sequential pattern of wind stress curl shows resemblance with those of monthly and seasonal EKE and the two sequences have a correlation of 0.82 and 0.67, respectively, providing an evidence that wind stress curl can be the possible forcing for the monthly and seasonal variation of the EKE in the East Sea. The seasonality of the EKE also seems to correlate with the seasonality of the Tsushima Warm Current. There also exists the large spatial and interannual variabilities in the EKE.

• 한국해안·해양공학회논문집
• /
• 제21권2호
• /
• pp.154-163
• /
• 2009

해안에서 입사파향은 일반적으로 실측 파랑자료로부터 생성한 파향 스펙트럼 분석을 통하여 구하지만, 파향의 실측기법은 현장 계기설치시 많은 인력과 비용이 소요되기 때문에 전 쇄파지역에 걸쳐 입사파향을 관측하기에는 어려움이 따른다. 이러한 이유로, 본 연구는 해안 디지털 비디오 자료에 나타나는 입사파의 파봉선을 이용하여 쇄파지역에서 입사파의 변화를 관측하는 기술을 제안한다. 파봉선은 이미지 상에서 선인식 기법을 이용하여 이미지 강도가 큰 픽셀들을 추적해 나감으로써 추출한다. 입사파향은 추출된 파봉선의 일차미분값, 즉, 실제 평면좌표 공간에서 파봉선의 기울기를 계산하여 구한다. 비디오 자료로부터 입사파향의 측정결과는 실측 파랑자료의 파향 스펙트럼으로부터 구한 파향 계산결과와 비교적 잘 일치한다.