• 전자공학회논문지
• /
• 제51권8호
• /
• pp.139-147
• /
• 2014

이번 연구에서는 병렬 결합된 두 개의 비동기 순차 머신에 대한 교정 제어 문제를 다룬다. 각 비동기 머신은 동일한 외부입력을 받아 서로 독립적인 상태 천이 특성을 보인다. 본 논문에서는 한 개의 교정 제어기만을 이용하여 두 개의 비동기 머신의 폐루프 시스템 동작을 각각의 기준 모델의 동작과 일치시키도록 하는 제어 방법을 제안한다. 본 방법은 교정 제어기 두 개를 사용해야 하는 기존 방법에 비해 제어기 크기 및 계산량을 줄일 수 있다. 본 논문에서는 대상 비동기 머신이 입력/상태 유형이라고 설정하고 상태 피드백 교정 제어기가 존재할 조건과 설계 과정을 제시한다. 또 예제 시스템을 통하여 제안된 기법의 적용 과정을 기술한다.

• 응용통계연구
• /
• 제22권5호
• /
• pp.1033-1046
• /
• 2009

신약 개발 연구 또는 임상시험에서 개발된 약이 0용량 대조군과 비교해 유의한 효과 차이가 있어 신체에 반응할 수 있는 최소 복용량을 결정하는데, 이 최소 복용량을 최소 효과 용량(Minimum Effective Dose; MED)이라 한다. 이 논문에서는 최소 효과 용량을 확인하기 위하여 업데이티드 대조군을 이용한 모수적 축차 검정법을 제안하였다. 또한 모의 실험을 통하여 기존의 검정법과 제안한 검정법의 실험유의수준(experimental significance level)과 검정력(power)을 비교하였다.

• International Journal of Control, Automation, and Systems
• /
• 제3권2호
• /
• pp.166-172
• /
• 2005

With the development of RAIM techniques for single failure, increasing interest has been shown in the multiple failure problem. As a result, numerous approaches have been used in attempts to tackle this problem. This paper considers the two failure problem with total least squares (TLS) technique, a solution that has rarely been addressed because TLS requires an immense number of computations. In this paper, the special form of the observation matrix H, (that is, one column is exactly known) is exploited so as to develop an algorithm in a sequential form, thereby reducing computational load. The algorithm permits the advantages of TLS without the excessive computational burden. The proposed algorithm is verified through a numerical simulation.

• 제어로봇시스템학회논문지
• /
• 제10권12호
• /
• pp.1280-1286
• /
• 2004

A lot of industrial chemical processes contain certain input nonlinearities even though they are controlled by several linear controllers. Here we investigate a sequential loop closing identification method for MIMO Hammerstein nonlinear processes with diagonal nonlinearities. The proposed method separates the identification of the nonlinear static function from that of the linear subsystem by using a relay feedback test and a triangular type signal test. From 2 n activations for n n MIMO nonlinear processes, we sequentially identify the whole range of the nonlinear static function as well as the transfer function matrix of the linear subsystem.

• 대한전자공학회논문지
• /
• 제20권2호
• /
• pp.23-28
• /
• 1983

본 논문에서는 위상 고정 회로를 이용한 직류 전동기의 동기화 속도 제어 방법 중 가변 순차 여파기를 주파수 비교기로 사용한 제어 방식을 제안하고, 이를 실제로 구성하여 특성을 조사하였다. 가변 순차 여파기를 이용하므로써 제어계의 과도 응답 시간을 단순한 가역 계수기를 주파수 비교기로 이용한 계보다 15(%) 이상 개선시켰고, 정상 상태 속도 오차는 1회전상 0.05(%)이내로 줄일 수 있었다.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1665-1675
• /
• 2007

This paper presents the problem of controlling asynchronous sequential machines in the presence of input disturbances, which may be also regarded as an adversary in a game theoretic setting. The main objective is to provide necessary and sufficient condition for the existence of a corrective controller that solves model matching problem of an asynchronous machine suffering from input disturbance. The existence condition can be stated in terms of a simple comparison of two skeleton matrices. The proposed controller eliminates the adversarial effect of input disturbance and makes the controlled machine mimic the behavior of a model in stable-state way. Whenever controller exists, algorithms for their design are outlined and demonstrated in a case study.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1655-1664
• /
• 2007

This paper presents the problem of controlling asynchronous sequential machines in the presence of input disturbances, which may be also regarded as an adversary in a game theoretic setting. The main objective is to develope a new methodology for including unpredictable behavior of input disturbance into models of asynchronous machines. The input disturbance, representing uncontrollable noise input, is embedded into a new model of asynchronous machines in form of input/state finite state machines. It is shown that the proposed modeling preserves the fundamental model and well-pose of asynchronous machines. The reachability matrix, an important performance index of asynchronous machines, is also adapted according to input disturbance and will be used for constructing corrective controllers in the companion paper.

• International Journal of Control, Automation, and Systems
• /
• 제4권3호
• /
• pp.318-324
• /
• 2006

The mobile manipulator is expected to work in partially defined or unstructured environments. In our global/local approach to path planning, joint trajectories are generated for a desired Cartesian space path, designed by the global path planner. For a local path planner, inverse kinematics for a redundant system is used. Joint displacement limit for the manipulator links is considered in the motion planner. In an event of failure to obtain feasible trajectories, the task cannot be accomplished. At the point of failure, a deviation in the Cartesian space path is obtained and a replanner gives a new path that would achieve the goal position. To calculate the deviation, a nonlinear optimization problem is formulated and solved by standard Sequential Quadratic Programming (SQP) method.

• 제어로봇시스템학회논문지
• /
• 제18권3호
• /
• pp.285-294
• /
• 2012

Using bearing measurement only, target motion state is not directly obtained so that TMA (Target Motion Analysis) is needed for this situation. TMA is a nonlinear estimation technique used in passive SONAR systems. Also it is the one of important techniques for underwater combat management systems. TMA can be divided to two parts: batch estimation and sequential estimation. It is preferable to use sequential estimation for reducing computational load as well as adaptively to target maneuvers, batch estimation is still required to attain target initial state vector for convergence of sequential estimation. Selection of batch time interval which depends on observability is critical in TMA performance. Batch estimation in general utilizes predetermined batch time interval. In this paper, we propose a new method called the BTIS (Batch Time Interval and Initial State Estimation). The proposed BTIS estimates target initial status and determines the batch time interval sequentially by using a bank of GMM-TS (Gaussian Mixture Measurement-Track Splitting) filters. The performance of the proposal method is verified by a Monte Carlo simulation study.

• 유공압시스템학회논문집
• /
• 제8권2호
• /
• pp.29-35
• /
• 2011

These days the injection molding work and press work are in the trend of needing the precision control of position and pressure in a high speed. On the other hand the digital computer technology is developing rapidly. And recently the digital servo controller using micro controller become to be used more broadly, because of the merit of digital communication. In this study the sequential control of hydraulic system switching from position to pressure and to position is tried using the HACD(Hydraulic Axis Controller Digital for electrohydraulic drives) which is manufactured by BoschRexroth. Through this, the possibility of the precision sequential control using the digital servo controller HACD is examined.