• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.54-61
• /
• 1998

Ladder Diagram(LD) is the most extensively used among Programmable Logic Controller(PLC) standard languages for the design of process control system with PLC. But LD has the disadvantages for data processing and maintenance. On the other hand, there is full support for describing sequences so that complete sequential behavior can be easily broken down using a concise graphical language called Sequential Function Chart(SFC). Inspite of those characteristics, SFC is not suitable for describing interlock logic. In this paper, we propose the method for implementing interlock logic by using conventional SFC compiler and verify the effectiveness by applying proposed scheme to the In-Line Spin Coater.Coater.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.1012-1015
• /
• 2004

There have been several kinds of attempts to actively control the deflected noise behind the noise barrier. Omoto's work in 1993 would be one of the fundamental studies, where he placed the control sources uniformly parallel to the noise barrier. Following this study, Yang pointed that the average distance between the noise source and control sources is more important than the arrangement of control sources such as a straight line or an arc type distribution. In 2004, Baek tried to show optimal arrangement of control sources while keeping the average distance between the noise source and control sources. He used simulated annealing algorithm which is one of the natural algorithms for the selections of optimal control source positions, but the searching technique was a hybrid of the simulated annealing and the sequential searching to adapt to the vast amount of searching time. This study is about the performance comparison between the pure sequential searching and the hybrid one. The simulation results show very similar performance and a pure simulated annealing searching will be more beneficial for the noise reduction performance but at the cost of computing time.

• Journal of Korean Society for Quality Management
• /
• v.25 no.3
• /
• pp.22-38
• /
• 1997

In a traditional sequential acceptance sampling plan, it is assumed that the sampled items are independent each other. In this paper, stochastically dependent sequential acceptance sampling plans are dealt when there exists dependency between sampled items. Monte-Calro algorithm is used to find the acceptance and rejection probabilities of a lot. The number of defectives for the test to be accepted and rejected in probability ratio sequential test can be found by using these probabilities. The formula for measures of performance of these sampling plans is developed. Type I and II error probabilities are estimated by simulation. This research can be a, pp.ied to sequential sampling procedures in place of control charts where there is a recognized and necessary dependency during the production processes. Also, dependent multiple acceptance sampling plans can be derived by extending this sequential sampling procedure. As a numerical example, a Markov dependent process model is given, and the characteristics of the sampling plans are examined according to the change of the dependency factor.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.727-734
• /
• 2020

Fault tolerant corrective control for asynchronous sequential machines (ASMs) with transient faults is discussed in this paper. The considered ASM is vulnerable to a kind of faults whose manifestation may arise during transient transitions of the ASM, leading to transient faults occurring in non-fundamental mode. To overcome adverse effects caused by these faults, we present a novel corrective control scheme that can detect and tolerate transient faults in non-fundamental mode. The existence condition and design algorithm for an appropriate fault tolerant controller is addressed in the framework of corrective control theory. The applicability of the proposed control methodology is demonstrated in the FPGA experiment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.511-519
• /
• 2016

This paper is proposed control algorithm for the using thyristor of the parallel dual converter for Urban railway power supply in order to return the regenerative power generated by regenerative braking in urban railway train. Conventional control algorithm of Thyristor dual converter for urban railway power supply has voltage variation within a control range of hysteresis band. The purposed control algorithm of the parallel thyristor dual converter is to maintain a constant voltage without voltage variation in accordance with variable load through the Sequential mode change. And the control algorithm need calculating optimum initial firing angle to consider magnitude of the load current slope. For this purpose, Proposed algorithm for sequential conversion mode of the dual converter was verified by applying for the simulation.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.636-638
• /
• 2003

This paper presents a new approach which is able to determine the reasonable incentive levels of direct load control using sequential Monte Carlo simulation techniques. The economic analysis needs to determine the reasonable incentive level. However, the conventional methods have been based on the scenario methods because they had not considered all cases of the direct load control situations. To overcome there problems, this paper proposes a new technique using sequential Monte Carlo simulation. The Monte Carlo method is a simple and flexible tool to consider large scale systems and complex models for the components of the system. To show its effectiveness, numerical studies were performed to indicate the possible applications of the proposed technique.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.159-166
• /
• 2019

Due to the various engagement situations, it is very difficult to generate the optimal trajectory with several constraints. This paper investigates the sequential convex programming for the impact angle control with the additional constraint of altitude limit. Recently, the SOCP(Second-Order Cone Programming), which is one area of the convex optimization, is widely used to solve variable optimal problems because it is robust to initial values, and resolves problems quickly and reliably. The trajectory optimization problem is reconstructed as convex optimization problem using appropriate linearization and discretization. Finally, simulation results are compared with analytic result and nonlinear optimization result for verification.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.202-210
• /
• 2011

The fabrication method of aspheric lens is changed from machining to press molding so as to improve the productivity. In the case of the press molding method, the temperature control of the molding die is most important, because the temperature of each molding die determines the quality of lens. But any practical method for direct measuring of the lens temperature and the die internal temperature is yet unknown. Besides, in the case of the press molding system in which the heating and pressing and cooing of a die is done at separate work stations, the lens productivity of the system for small lens is yet too low. The paper shows an improved structure of convective sequential system, the lens productivity of which is three times as many as the conventional convective system. To know the die internal temperature, numerical results are given using ANSYS. A new convective sequential system is developed and tested. Finally, the Taguchi method is applied in order to optimize the setting conditions of individual work station of the system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.127-133
• /
• 2005

Programmable Logic Controller(PLC) is the most widely utilized and plays an important role in industrial control system. The study about a PLC language is performed actively. Ladder Diagram(ID) is the most widely used in PLC. In is not suitable for describing a complex sequential logic and is very difficult to grasp the sequential flow of control logic and has the disadvantage for a maintenance. On the other hand, Sequential Function Chart(SFC) is very easy to grasp the sequential flow of control logic and has the compatability for a maintenance but has the disadvantage for describing a condition and a interlock logic. In this paper, we propose the method that describe the interlock logic using management step, and confirm his feasibility through a actual examples.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.67-74
• /
• 2010

The fabrication method of aspheric lens is changed from machining to press molding so as to improve the productivity. In the case of the press molding method, the temperature control of the molding die is most impotent, because the temperature of each molding die determines the quality of lens. But any practical method for direct measuring of the lens temperature and the die internal temperature is yet unknown. Besides, in the case of the press molding system in which the heating and pressing and cooing of a die is done at one work station, the cycle time for the system is yet too long. The paper shows an improved structure of radiant sequential system in which the heating and pressing and cooing of dies is done at individual work station so as to cut down the cycle time. To know the die internal temperature, numerical results are given using ANSYS. An experimental radiant sequential system is developed and tested. Finally, the Taguchi method is applied in order to optimize the setting conditions of individual work station.