• Journal of computational fluids engineering
• /
• v.20 no.4
• /
• pp.70-80
• /
• 2015

Construction waste is known to include a large part of coarse and fine aggregates, which can be recirculated in the industry. Separating those aggregates economically from the waste has been thus considered to be one of the most important issues in this field. In particular, paste mixed in the waste causes significant complain from the inhabitants living near the place where waste-processing equipments are built and operated. In this study, we investigate the operational principle of a newly developed paste separator by using theoretical (in this first part) and CFD (in the second part) analysis. The separator consists of a rotor which turned out to play a significant role in separating those pastes from the aggregates. Under suitable assumptions regarding the air flow velocity as well as the particle velocity, we show that particles can be stagnant at the outlet of the roto channel for a wide range of parameter values, which allow the particles to get enough time to settle down via the gravitation. We also demonstrate such phenomenon by using a simple numerical simulation.

• Structural Engineering and Mechanics
• /
• v.76 no.3
• /
• pp.293-310
• /
• 2020

This study derives the differential equations of free vertical bending and torsional vibrations for two- and three-pylon suspension bridges using d'Alembert's principle. The respective algorithms for natural vibration frequency and vibration mode are established through the separation of variables. In the case of the three-pylon suspension bridge, the effect of the along-bridge bending vibration of the middle pylon on the vertical bending vibration of the entire bridge is considered. The impact of torsional vibration of the middle pylon about the vertical axis on the torsional vibration of the entire bridge is also analyzed in detail. The feasibility of the proposed method is verified by two engineering examples. A comparative analysis of the results obtained via the proposed and more intricate finite element methods confirmed the former feasibility. Finally, the middle pylon stiffness effect on the vibration frequency of the three-pylon suspension bridge is discussed. It is found that the vibration frequencies of the first- and third-order vertical bending and torsional modes both increase with the middle pylon stiffness. However, the increase amplitudes of third-order bending and torsional modes are relatively small with the middle pylon stiffness increase. Moreover, the second-order bending and torsional frequencies do not change with the middle pylon stiffness.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.4
• /
• pp.41-48
• /
• 2022

This study is a study that designed in-building antennas with improved orientation to improve 5G quality in buildings as 5G is stabilized and more and more traffic is expected to occur in buildings. Instead of applying the forward arrangement of antenna elements, which is the Yagi antenna propagation orientation principle, the antenna design method of vertical arrangement applied to the base station antenna was proposed, and it was confirmed through experiments that antenna orientation increased. According to the experimental results, the directivity did not increase significantly within 10m of the separation distance from the antenna, but the directivity increased by about 3dB at the distance separated by more than 10m. Considering that the wireless environment in the building has various variables such as structure of internal structure, materials such as concrete and glass, closed space, and walls, it is expected that antenna with improved orientation can expand the scope of 5G quality improvement and maintain stable communication service in the building.

• Journal of Information Processing Systems
• /
• v.12 no.2
• /
• pp.196-213
• /
• 2016

System Architecture Evolution (SAE) with Long Term Evolution (LTE) has been used as the key technology for the next generation mobile networks. To support mobility in the LTE/SAE-based mobile networks, the Proxy Mobile IPv6 (PMIP), in which the Mobile Access Gateway (MAG) of the PMIP is deployed at the Serving Gateway (S-GW) of LTE/SAE and the Local Mobility Anchor (LMA) of PMIP is employed at the PDN Gateway (P-GW) of LTE/SAE, is being considered. In the meantime, the Host Identity Protocol (HIP) and the Locator Identifier Separation Protocol (LISP) have recently been proposed with the identifier-locator separation principle, and they can be used for mobility management over the global-scale networks. In this paper, we discuss how to provide the inter-domain mobility management over PMIP-based LTE/SAE networks by investigating three possible scenarios: mobile IP with PMIP (denoted by MIP-PMIP-LTE/SAE), HIP with PMIP (denoted by HIP-PMIP-LTE/SAE), and LISP with PMIP (denoted by LISP-PMIP-LTE/SAE). For performance analysis of the candidate inter-domain mobility management schemes, we analyzed the traffic overhead at a central agent and the total transmission delay required for control and data packet delivery. From the numerical results, we can see that HIP-PMIP-LTE/SAE and LISP-PMIP-LTE/SAE are preferred to MIP-PMIP-LTE/SAE in terms of traffic overhead; whereas, LISP-PMIP-LTE/SAE is preferred to HIP-PMIP-LTE/SAE and MIP-PMIP-LTE/SAE in the viewpoint of total transmission delay.

• Journal of Environmental Science International
• /
• v.23 no.5
• /
• pp.943-962
• /
• 2014

Industrial gas drying, dilute gas mixtures purification, air fractionation, hydrogen production from steam reformers and petroleum refinery off-gases, etc are conducted by using adsorptive separation technology. The pressure swing adsorption (PSA) has certain advantages over the other methods, such as absorption and membrane, that are a low energy requirement and cost-effectiveness. A key component of PSA systems is adsorbents that should be highly selective to a gas being separated from its mixture streams and have isotherms suitable for the operation principle. The six standard types of isotherms have been examined in this review, and among them the best behavior in the adsorption of $CO_2$ as a function of pressure was proposed in aspects of maximizing a working capacity upon excursion between adsorption and desorption cycles. Zeolites and molecular sieves are historically typical adsorbents for such PSA applications in gas and related industries, and their physicochemical features, e.g., framework, channel structure, pore size, Si-to-Al ratio (SAR), and specific surface area, are strongly associated with the extent of $CO_2$ adsorption at given conditions and those points have been extensively described with literature data. A great body of data of $CO_2$ adsorption on the nanoporous zeolitic materials have been collected according to pressure ranges adsorbed, and these isotherms have been discussed to get an insight into a better $CO_2$ adsorbent for PSA processes.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.11
• /
• pp.163-171
• /
• 2010

RBAC(Role-Based Access Control) has advantages in managing access controls, because it offers the role inheritance and separation of duty in role hierarchy structures. Delegation is a mechanism of assigning access rights to a user. RBDM0 and RDM2000 models deal with user-to-user delegation. The unit of delegation in them is a role. However, RBAC does not process delegation of Role or Permission effectively that occurs frequently in the real world. This paper proposes a Time Constraints Permission-Based Delegation Model(TCPBDM) that guarantees permanency of delegated permissions and does not violate security principle of least privilege and separation of duty. TCPBDM, based on the well-known RBAC96, supports both user-to-user and role-to-role delegation with time constraints. A delegator can give permission to a specific person, that is delegatee, and the permission can be withdrawn whenever the delegator wants. Our model is analyzed and shown to be effective in the present paper.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.1
• /
• pp.3655-3665
• /
• 1975

This study was intended to develop a method for measuring the grain separating performance of threshers. The grain separating apparatus used for the experiment was designed and constructed, the function of which was to separate pneumatically mature and immature grain, chaff, straw, dust, and other impurities from the products of threshing. The apparatus has five material outlets where grains and impurities are fallen down by separation depending upon the specific gravity of the material white it moves above the outlets. The principle of design was to separate the mixture of mature grain, immature grain and chaff as distinct as possible, and to induce the mature grains onto the first outlet, the immature grains onto the second and the third, and the straw wastes onto the forth and the fifth outlets. The developed apparatus was tested to evaluate its separating performance with two rice varieties (Tongil and Mine-hikari) at different moisture levels and air velocities. The optimum conditions for operating the apparatus were found from experiment. The results are summarized as follows; 1. The degrees of separation, especially the amount of immature grain contained in the mature paddy, were dependent upon air speed delivered. The optimum air velocities for this apparatus for each levels of grain moisture contents were found from a series of experiments as follows; 14.7-15.3m/sec. for grain of 16 percent moisture content in wet basis, 15.3-16.0m/sec. for 20 percent, and 16.0-16.4m/sec for 24 percent. 2. Composition ratios determined based on the brine separating method was fairly well acted upon the developed apparatus, indicating its recollecting rate of the mature grains as 97.6 to 99.9 percent. The developed separatus acted similarly upon the two rice varieties which had different composition of immature paddy grain. In other words, the separating performance by the apparatus had a good correlation with the one by the brine separating method. 3. As immature grains were separated out unsatisfactory in these experiments than the brine separating method, further investigation may be needed to improve a separating performance of these materials. But the results obtained suggested a possibility of using the tester to replace the current hand separating method, ther eby enabling more consistent test results and also eliminating nearly all costly hand seperating operations.

• The Korean Society of Law and Medicine
• /
• v.19 no.2
• /
• pp.41-72
• /
• 2018

In the division of labor (or teamwork) in medicine, the responsibility of medical and nursing staff should be separated or distributed to justify negligent criminal offenses. The present work refers to the standards by which the due diligence and responsibility of the individual persons are to be determined and delimited. In this context, it has been proven that objective theory as a measure of due diligence is appropriate. From a moral point of view, when assessing due diligence, it makes sense to impose greater individual or higher performance demands on the perpetrator, but law and order require that due diligence should result from socially relevant human behavior. To give objective measure of negligence and to provide the highest level of personal responsibility, so that man can not be burdened too much responsibility and it is accordingly with an equality theorem. Afterwards some points are presented, which should be considered in a concrete fact in the determination of the medical negligence. Medical action has specific characteristics such as professionalism, discretionary and exclusive, unbalance of information. These characteristics distinguish medical actions from general negligence. The general level of knowledge, the urgency, working condition and working environment of the medical facility, duration of the professional practice, assessment of the medical activity are crucial in this context. As a standard of delineation of due diligence, I have used the permitted risk and the principle of trust. In the horizontal division of labor, the principle of trust applies. The principle of trust applies in principle in cases of division of labor interaction, when doctors in the same hospital exercise their own specific occupational field or everyone works in another hospital. However, this is not true for every case. In the vertical division of labor, the principle of trust does not apply and the senior physician can not trust the assistant doctors. In this case, the principle of trust is converted into a duty of supervision for assistant doctors by the senior physician. This supervision requirement could be used as a random check.

• Journal of the Korean housing association
• /
• v.17 no.4
• /
• pp.57-64
• /
• 2006

This research is the survey result of the retirement house in Ochiai area that is a famous as mountain village of Japan. This area is being formed in a steep slope and be arranged the building long a side along the contour line. As for the plan type of a main house 'the middle bedroom three-madori(bay) type' and 'the parallel two madori(bay) type' occupy many. As for in the retirement custom of Ochiai area the independence family style (separation/ separate meal/separate household economy) is a principle and a parents family builds the retirement house and move out. The plan. of the retirement house is two-room type of 'Omote(public room) and Uchi(kitchen and living room)' and agree with the plane prototype 'plan constitution of a necessary minimum' of farmhouse of this area. The reconstruction that the retirement house is remodeled handily with a main home, especially intend the convenience of the life such as a kitchen and toilet has been done. The retirement custom has been succeeded thoroughly until recent years in this area. However, this traditional custom is seeing the end, without there is the successor of a main house with depopulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.836-839
• /
• 2005

The in-plane vibration response of a clamped circular plate should be predicted in many applications. Up to now, papers on the in-plane vibration of rectangular plate are published. However, analytical derivation on the in-plane vibration of the clamped circular plate is not carried out. Therefore, the in-plane vibration of the clamped circular plate is the concern of this paper. In order to derive the equations of motion for the clamped circular plate in the cylindrical coordinate, the kinetic energy and potential energy for the in-plane behavior are obtained by us ing the stress-strain-displacement expressions. Application of Hamilton's principle leads to two sets of differential equations. These displacement equations were highly coupled. It is possible to obtain a simpler set of equations by introducing Helmholtz decomposition. Substituting them into the coupled differential equations, we obtain the uncoupled equations of motion. In order to solve them, we assume that the solutions are harmonic. Then, they lead to the wave equations. Using the separation of variable, we obtain the general solutions for the equations. Based on the solutions, the displacements for r and $\theta$ direction are assumed. Finally we obtain the frequency equation for the clamped circular plate by the application of boundary conditions. The derived equation is compared with the finite element analysis for validation by using the some numerical examples.