• 농촌지도와개발
• /
• 제4권1호
• /
• pp.305-315
• /
• 1997

The propose of this study was to analyze the relationships among the levels of training & development evaluation (reaction, learning, transfer). The study has been conducted on 730 trainees who attended in the basic accounting program in L training and development institution through three incidents of tracked research such as reaction survey right after the conclusion of training, learning evaluation through test, and an evaluation of the transferability after 3 months of training. Questionnaires and test papers for analyses were used after their reliability, validity, difficulty, and discrimination have been verified on a pre-test. The research has been conducted for six months from 4 March 1996 to the end of August 1996, and data have been collected through direct research and survey through mail. The collected data have been worked on at SAS program for Windows with a statistical significance level of 5%. Statistical method that had been used was Pearson's correlation coefficient. The result and conclusion acquired from this study were as follows: Between reaction and learning, learning and transfer of training, only a weak positive correlation exists and explanation or prediction variance showing hierarchical relationship was quite weak with 1%. Thus, this research not only does not strongly support Kirkpatrick(1976)'s hierarchical model of $reaction{\rightarrow}learning{\rightarrow}transfer$, but also indicates that the separate measurement on each levels of training evaluation needs to be done. On the other hand, there was a relatively strong positive correlation between reaction and transfer of training. Based on the result, the conclusion, and the restriction perceived through this study, the following suggestions were made. 1. There is a need to empirically analyze and verify the hierarchy of all levels of training evaluation including the evaluation of the fourth level (result) such as organizational productivity, organizational satisfaction, and separation rate. 2. A great deal of efforts will be needed to systematically analyze what the relationships are among the methods measuring the level of evaluation of the training and development, and to apply this result to the training field.

• 공업화학
• /
• 제5권1호
• /
• pp.127-138
• /
• 1994

CTA(cellulose triacetate) 막을 이용한 물과 에탄올의 투과증발(pervaporation) 막분리에서 수착과 투과실험으로부터 용해-확산 투과기구modeling 및 그 함수형과 parameters에 대한 해석을 시도하였다. 순성분들의 수착 data를 사용하여 Flory-Huggins 식으로 계산한 3 성분계(에탄올/물/CTA) 수착평형 조성을 추산하여 실측치와 비교하였다. 막 내부의 조성과 액상의 평형 조성간에 열역학적 평형 관계식을 적용하기 위해 막 내 겉보기 활동도를 Wilson식과 Van Laar식으로 상관시켰다. 투과속도식은 한 성분의 투과속도가 그 성분의 막 내 농도구배에 비례하며, 또한 확산계수의 농도 의존성이 에탄올 농도만의 지수함수라고 가정하여 물과 에탄을 투과속도를 계산하였으며 이는 실측치와 잘 일치하였다. 한 성분의 투과속도와 수착량이 다른 성분에 비해 현저히 작은 경우에는 대류항을 무시할 수 없음을 알았고, 온도가 높고, 투과측 압력이 낮을수록 투과속도와 투과선택도가 증가하였다.

• 센서학회지
• /
• 제29권1호
• /
• pp.27-32
• /
• 2020

This study proposes a pixel-patterning method for organic light-emitting diodes (OLEDs) based on thermal transfer. An infrared lamp was introduced as a heat source, and glass type donor element, which absorbs infrared and generates heat and then transfers the organic layer to the substrate, was designed to selectively sublimate the organic material. A 200 nm-thick layer of molybdenum (Mo) was used as the lightto-heat conversion (LTHC) layer, and a 300 nm-thick layer of patterned silicon dioxide (SiO₂), featuring a low heat-transfer coefficient, was formed on top of the LTHC layer to selectively block heat transfer. To prevent the thermal oxidation and diffusion of the LTHC material, a 100 nm-thick layer of silicon nitride (SiN_x) was coated on the material. The fabricated donor glass exhibited appropriate temperature-increment property until 249 ℃, which is enough to evaporate the organic materials. The alpha-step thickness profiler and X-ray reflection (XRR) analysis revealed that the thickness of the transferred film decreased with increase in film density. In the patterning test, we achieved a 100 ㎛-long line and dot pattern with a high transfer accuracy and a mean deviation of ± 4.49 ㎛. By using the thermal-transfer process, we also fabricated a red phosphorescent device to confirm that the emissive layer was transferred well without the separation of the host and the dopant owing to a difference in their evaporation temperatures. Consequently, its efficiency suffered a minor decline owing to the oxidation of the material caused by the poor vacuum pressure of the process chamber; however, it exhibited an identical color property.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 춘계학술대회논문집; 전남대학교, 19 May 1995
• /
• pp.196-201
• /
• 1995

The broadband and discrete sources of sound in small cooling fans of propeller type and centrifugal type were investigated to understand the turbulent vortex structures from many bladed fans using ANSI test plenum for small air-moving devices (AMDs). The noise measurement method uses the plenum as a test apparatus to determine the acoustic source spectral density function at each operating conditions similar to real engineering applications based on acoustic similarity laws. The characteristics of fans including the head rise vs. volumetric flow rate performance were measured using a performance test facility. The sound power spectrum is decomposed into two non-dimensional functions: an acoustic source spectral distribution function F(St,.phi.) and an acoustic system response function G(He,.phi.) where St, He, and .phi. are the Strouhal number, the Helmholtz number, and the volumetric flow rate coefficient, respectively. The autospectra of radiated noise measurements for the fan operating at several volumetric flow rates,.phi., are analyzed using acoustical similarity. The rotating stall in the small propeller fan with a bell-mouth guided is mainly due to a leading edge separation. It creates a blockage in the passage and the reduction in the flow rate. The sound power levels with respect to the rotational speeds were measured to reveal the mechanisms of stall and/or surge for different loading conditions and geometries, for example, fans installed with a impinging plate. Lee and Meecham (1993) studied the effect of the large-scale motions like impinging normally on a flat plate using Large-Eddy Simulation(LES) and Lighthill's analogy.[ASME Winter Annual Meeting 1993, 93-WA/NCA-22]. The dipole and quadrupole sources in the fans tested are shown closely related to the vortex structures involved using cross-correlations of the hot-wire and microphone signals.

• 한국해양공학회지
• /
• 제27권4호
• /
• pp.76-82
• /
• 2013

Motion reduction of an offshore structure at resonant frequency is essential for avoiding critical damage to the topside and mooring system. A damping plate has a distinct advantage in reducing the motion of a floating structure by increasing the added mass and the damping coefficient. In this study, the heave motion responses of a circular cylinder with an impermeable and a permeable damping plate attached at the bottom of the cylinder were investigated thru a model test. The viscous damping coefficients for various combinations of porosity were obtained from a free-decay test by determining the ratio between any pair of successive amplitudes. Maximum energy dissipation occurred at a porous plate with a porosity P = 0.1008. Experimental results for regular and irregular waves were compared with an analytical solution by Cho (2011). The measured heave RAO and spectrum reasonably followed the trends of the predicted values. A significant motion reduction at resonant frequency was pronounced and the heaving-motion energy calculated by the integration of the area under the heave motion spectrum was reduced by more than 75% by the damping plate. However, additional energy dissipation by eddies of strong vorticity and flow separation inside a porous damping plate was not found in the present experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.45-47
• /
• 2006

Cleft palate is a congenital deformity condition with separation of the two sides of the lip resulting in nose deformity. Evaluation of surgical corrections and outcome assessments for nose deformity due to the cleft lip depends mainly on doctor's subjective judgment. An objective method for evaluation of the condition and surgical outcome of nose deformity due to the cleft palate is needed. This study aimed at objective assessment of a cleft palate nose deformity condition by analyzing the following parameters obtained from photographic images of a cleft palate patients: (1) angle difference between two nostril axes. (2) center of the nostril and distance between two centers. (3) overlapped area of two nostrils, and (4) the overlapped area ratio of the two nostrils. A regression equation of doctor's grades was obtained using the eight parameters. Three plastic surgeons gave us the grades for the each photographic image by 10 increments with maximum grade of 100. The average reproducibility of the grades given by the three plastic surgeons and the three laymen using the developed program was $10.8{\pm}4.6%$ and $7.4{\pm}1.8%$, respectively. Kappa values representing the degree of consensus of the plastic surgeons and the three laymen were 0.43 and 0.83. respectively. Correlation coefficient of the grades evaluated by the surgeons and obtained by the neural network was 0.798. In conclusion. the developed neural network model provided us better reproducibility and much better consensus than doctor's subjective evaluation in addition to objectiveness and easy application.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권12호
• /
• pp.1901-1908
• /
• 2007

The aim of this series of experiments was to examine the opportunity for application of X-ray computer tomography (CT) in cattle production. Firstly, tissue composition of M. longissimus dorsi (LD) cuts between the $11-13^{th}$ ribs (in Exp 1. between the $9-11^{th}$ ribs), was determined by CT and correlated with tissue composition of intact half carcasses prior to dissection and tissue separation. Altogether, 207 animals of different breeds and genders were used in the study. In Exp. 2 and 3, samples were taken from LD cuts, dissected and chemical composition of muscle homogenates was analysed by conventional procedures. Correlation coefficients were calculated among slaughter records, tissues in whole carcasses and tissue composition of rib samples. Results indicated that tissue composition of rib samples determined by CT closely correlated with tissue composition results by dissection of whole carcasses. The findings revealed that figures obtained by CT correlate well with the dissection results of entire carcasses (meat, bone, fat). Close three-way coefficients of correlation (r = 0.80-0.97) were calculated among rib eye area, volume of cut, pixel-sum of adipose tissue determined by CT and intramuscular fat or adipose tissue in entire carcasses. Estimation of tissue composition of carcasses using equations including only CT-data as independent variables proved to be less reliable in prediction of lean meat and bone in carcass ($R^2 = 0.51-0.86$) than for fat (($R^2 = 0.83-0.89$). However, when cold half carcass weight was also included in the equation, the coefficient of determination exceeded $R^2 = 0.90$. In Exp. 3 tissue composition of rib samples by CT were compared to the results of EUROP carcass classification. Findings revealed that CT analysis has higher predictive value in estimation of actual tissue composition of cattle carcasses than EUROP carcass classification.

• 한국응용과학기술학회지
• /
• 제29권1호
• /
• pp.122-128
• /
• 2012

L-arpartic acid의 산란혼탁매질에서 형광, 산란과 응집의 영향은 파장과 산란된 형광세기로 나타내는데, laser induced fluorescence(LIF) 분광학에 의한 분자특성으로 나타난다. 산란매질에서 광학적 효과는 광학적 파라미터들(${\mu}_s$, ${\mu}_a$, ${\mu}_t$)에 의해 표현되고 응집은 고-액상 분리공정에서 중요하게 활용되고 있다. 따라서 입자가 서로 접근될 때 콜로이드 입자들의 상호작용을 LIF와 응집효과로 분석하였다. 레이저 광원에서 검출기까지 농도의 함수에 의해 농도가 묽어짐에 따라 산란세기가 기하급수적으로 감소함을 알 수 있다. 이는 유지화학, 생의학 생성물, 레이저 의학, 의공학 분야적용에 LIF와 입자이동 현상은 아주 적합한 모델 연구에 큰 도움이 될 것이다.

• 한국응용과학기술학회지
• /
• 제31권2호
• /
• pp.167-175
• /
• 2014

혼탁매질에서 형광, 산란과 응집의 영향은 파장과 산란된 형광세기로 나타내는데, laser induced fluorescence(LIF) 분광학에 의한 분자특성으로 나타난다. 산란매질에서 광학적 효과는 광학적 파라미터들(${\mu}_s$, ${\mu}_a$, ${\mu}_t$)에 의해 표현되고 응집은 고-액상 분리공정과 Photodynamic therapy에서 중요하게 활용되고 있다. 따라서 입자가 서로 접근될 때 콜로이드 입자들의 상호작용을 LIF와 응집효과로 분석하였다. 우리는 레이저 광원에서 검출기까지 농도의 함수에 의해 in vitro 시료의 산란과 형광 스펙트라를 측정하였다. 산란계수 ${\mu}_s$는 산란체의 입자가 증가함에 크게 나타났다. 그리하여 Phorphyrin A는 Phorphyrin C보다 산란세기는 증가하였으나, 침투깊이 ${\delta}$는 감소하였다.

• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.178-189
• /
• 1989

본 연구에서는 우선 승용차의 1/10 모형의 형상을 더욱 단순화시킨 2차원 자동차형 물체를 대상으로 하여 그 주위의 압력, 속도 및 난류량의 분포를 측정하고, 또한 울터프트(wool tuft)를 이용한 유동가시화법으로 후류구조를 파악함으로써 향후 계속될 실험적 및 수치해석적 연구의 기초를 마련하고자 한다.