• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.12-20
• /
• 2008

Radial and vertical variations of relative crystallinity and crystallite width of cellulose within stems of three softwoods (Pinus densiflora S. et Z., P. koraiensis S. et Z, P. rigida Mill.) grown in Korea were examined by an X-ray diffraction method. The mean of relative crystallinity was 61.7% in P. koraiensis, 60.6% in P. densiflora and 49.4% in P. rigida. The degree of crystallinity in earlywood and latewood increased with the age from pith to about 10~15 years, and then remained almost constant value. The relative crystallinitiy of latewood was slightly higher than that of earlywood. The relative crystallinity in P. densiflora was a little lower at the base of stem, but no significant difference by height was shown in P. koraiensis and P. rigida. The crystallite widths in the stems were 2.8 to 3.0 nm, but were not significantly different in earlywood and latewood by height. In conclusion, the relative crystallinity appeared to be a useful index for separating juvenile wood from adult wood in the softwoods of P. densiflora, P. koraiensis, and P. rigida grown in Korea.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.3
• /
• pp.67-73
• /
• 2012

Local color transfer is the process of assigning a given color to a local region in a target image. The local region that contains the given color has to be segmented. Conventionally, the segmentation of the corresponding local region in a target image is based on the color distance. The region which is the closest in color distance is separated. However, since the close range of color distance separating a given color from target image is ambiguous and uncertain, color distortion is often generated around a separated local region. Therefore, this paper addresses the problem of segmentation in a local color transfer. To prevent color distortion, a modified color influence map is proposed with color categories. First, the target image is roughly segmented using a color category map, which groups similar colors in color space. It restricts the color transfer to a specific color category according to a given color. Second, modified color influence map assigning different weight to lightness and chroma, respectively, is used instead of Euclidian color distance. Then, by combining a modified color influence map and color category map filtered with anisotropic diffusion, a local region that contains a given color can be segmented more strictly than conventional method.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.16 no.2
• /
• pp.19-33
• /
• 2017

The purpose of this study is to derive education programs for safety training class, create unit spaces and present components and methods of utilizing the spaces for the development of facilities models closely related to various policy, operation plan and facility construction projects promoted by related institutions such as the Ministry of Education, schools, architects and companies. This study is divided into five steps. First, we reviewed the literature related basic directions for safety education and facility plan, second, field survey included both field conditions such as spatial size and facility configuration and analysis of operating conditions like hours of operation and personnel. Base on literature review and field survey, it were used to analyze strengths and weaknesses of existing safety training classes, and five facility models was developed based on the Delphi method and expert participatory design. The result show that the facility models (drafts) of safety training class were developed as follows: (1)the facility model for traffic safety(pedestrian safety, vehicle safety, subway safety) (2)the facility model for first aid(emergency rescue, how to report) (3)the facility model for disaster safety(fire evacuation safety, life earthquake safety) (4)the facility model for elevator safety(elevator safety, escalator safety) (5)the facility model for drugs and violence safety (smoking drinking, sexual harassment safety, food safety) The safety training class can be composed by combining or separating each module according to affordable space size of each school.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4777-4785
• /
• 2015

This study attempted to provide basic data for screening high-risk subjects by confirming suicidal thinking intensity and by identifying its influential factors in mid-aged men. Data No.3 from third National Health and Nutrition Survey in 2012 by the CDCP were used with 40-64 years middle-aged men targets. The collected data were analyzed via applying weight by using the complex sample analysis method of SPSS 19.0 program, frequency analysis, cross-analysis, and logistic regression analysis. The result revealed that 10% of middle-aged men showed suicidal thinking, and low-income earners had suicidal thinking 1.972 times higher than usual, the unmarried 2.587 times higher than men with spouses, men without spouses 1.482 times higher than men with spouses, the underweighted 18.183 times higher the obese. The blue-collared and the unemployed had suicidal thinking 1.349 and 13.342 times higher than the white-collared respectively. Furthermore, inactive subjects showed suicidal thinking 2.998 times higher than active subjects. Therefore, to prevent suicide in mid-aged men, separating these high-risk subjects in primary screening is needed for management, and suicide prevention programs should be developed at social and political level that include the information considering stress, depression, and obesity.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.2
• /
• pp.86-97
• /
• 2005

Accurate estimation of the wave-induced pore water pressure in the seabed is key factor in studying the stability of the seabed in the vicinity of coastal structure. Most of the existing numerical models for wave structure seabed interaction have been linked through applying hybrid numerical technique which is analysis method separating the wave field and seabed regime. Therefore, it is necessary to develope a numerical model f3r simulating accurately wave$\cdot$structure$\cdot$ seabed interaction under wave loadings by the single domain approach for wave field and seabed regime together. In this study, direct numerical simulation is newly proposed. In this model, modeled fluid drag has been used to detect the hydraulic properties according to the varied geometrical shape inside the porous media by considering the turbulence resistance as well as laminar resistance. Contrary to hybrid numerical technique, direct numerical simulation avoids the explicit formulation of the boundary conditions at the fluid/porous media interface. A good agreement has been obtained by the comparison between existed experimental results by hydraulic model test and direct numerical simulation results far wave $\cdot$structure$\cdot$seabed interaction. Therefore, the newly proposed numerical model is a powerful tool for estimating the nonlinear dynamic responses among a structure, its seabed foundation and water waves.

• Economic and Environmental Geology
• /
• v.38 no.2 s.171
• /
• pp.155-163
• /
• 2005

For an unbiased TF (Tansfer Function) estimations we investigate geomagnetic TF derived from ICHEON and YONGIN sites, employing RR (Remote Reference) and SNS (Signal Noise Separation) techniques. The Rh technique, which requires synchronized field variations recorded at a clean remote site, is a reliable method to minimize the bias of TF by uncorrelated noises in magnetic channels. Meanwhile, SNS technique based on the assumption of noise-free remote data can improve the signal-noise level by separating signal TF and noise TF, which is successfully applied to the environments with strong correlated noises. In this study, TF at YONGIN is analyzed using geomagnetic data from ICHEON site as a remote reference, which seem to have somewhat better data quality. The application of Rh technique reduces the bias of TF, which appears in single site robust estimation, and makes curves in the amplitude and phase of TF more smooth as frequency. Futhermore, in order to investigate noise source quantitatively, SNS technique is applied. The results of SNS suggest that dominant noise source seems to be located at western region of YONGIN. This noise source is considered to originate from railway system such as KTX and national subway. which passes through the west regions of YONGIN.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.84-96
• /
• 2007

We performed the experiments to manufacture the hydrophobic $200cells/in^2$-zeolite honeycomb using HY-type zeolite of Si/Al ratio of 80 for separating and removing the VOCs emitted from small and medium size-plants by adsorption and to determine the drying method for the honeycomb at $105^{\circ}C$ without cracking, then measured performances of the honeycomb to adsorb the benzene, o-xylene, and MEK and to desorb the benzene and MEK saturated on the honeycomb by the nitrogen gas as the desorption gas. As a results, the good honeycomb was formed and the honeycomb was not cracked when the mixing ratio of the zeolite to bentonite to methyl cellulose to polyvinyl alcohol to glycerine to water is 100 : 8.73 : 2.18 : 4.19 : 1.38 : 126 and dried the honeycomb at $105^{\circ}C$ for 24 hours in the drying oven. The shape of the dried honeycomb was not changed after calcination, and the compressive strengths of the honeycomb after drying and calcination were 6.7 and $0.69kg/cm^2$, respectively. The adsorption efficiencies of the honeycomb for benzene, o-xylene, and MEK were $92{\sim}96%$ at the room temperature. The desorption efficiency at $180^{\circ}C$ was higher than that at $150^{\circ}C\;by\;1.5{\sim}13.8%$ depending on the flow rate of the nitrogen gas, and it was found that desorption efficiency is higher than 85% at $180^{\circ}C$ and 1.0L/min of the nitrogen gas. At $180^{\circ}C$ and 0.2 L/min, the concentration of the benzene and MEK in the used desorption gas are higher than 40,000 and 50,000ppm, respectively, so it be used as the fuel for preheating the desorption gas fed into the column in desorption cycle.

• Journal of Korea Water Resources Association
• /
• v.45 no.10
• /
• pp.1069-1079
• /
• 2012

In this study, to analyze travelling route and transition characteristics which is a spatial time interpretation method now actively progressed in domestic as well as abroad, it was intended to develop new drought interpretation technique which can decide the centroid and orbit of drought through assuming ellipse using Mass Moment concept. First of all, after estimating Standard Precipitation Index (SPI) per different precipitation observatory station to extract drought events, by selecting precipitation sites where drought starting and end point are same, these were categorized as CASE. As a results, with various CASE selections falling in specific duration for monthly drought analysis, it is possible to find out drought area that additionally occurred, and drought reliving process could be confirmed more definitely. Therefore, if the research methods adopted in this study for drought monitoring are utilized, not only accurate spatio-temporal drought analysis is possible, also pattern of drought centroid movement can be analyzed by establishing statistically significant spatial characteristics data after separating all the drought events that occurred sporadically in Korea Peninsula.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.1995-2005
• /
• 2000

The use of heterotrophic denitrification as an alternative method for supplying alkalinity during sulfur-utilizing autotrophic denitrification was evaluated by examining the effects of external carbon source (both type and concentration) and HRT on denitrification efficiency. Concentrations of $NO_3{^-}-N$ and $COD_{Cr}$ of nitrified landfill leachate used for experiment were 700-900mg/L and 900-2500mg/L. respectively, All experiment was conducted with sulfur packed bed reactors (SPBRs) which were operated at $35^{\circ}C$. The fraction of $NO_3{^-}-N$ removed by heterotrophic denitrification ($HDNR_{fraction}$) to balance the alkalinity consumption by autotrophic denitrification varied with the type of external carbon source. When methanol and sodium acetate was added at theoretical HDNRfraction value. 100% denitrification was achieved without alkalinity addition. However, glucose and molasses require $HDNR_{fraction}$ value greater than theoretical value for complete denitrification. The EBCT and volumetric loading rate at which 100% denitrification efficiency could be achieved were 6.76 h and $2.84kg-NO_3{^-}-N/m^3{\cdot}d$, respectively, based on the fact that 100% denitrification occurred within the bottom 11.5 cm layer of the SPBR. The maximum nitrogen removal rate occurred with 89% removal efficiency at loading rate of $5.05kg-NO_3{^-}-N/m^3{\cdot}d$. However, at short EBCT, clogging of SPBR was observed with excess growth of heterotrophic denitrifiers. This problem may be eliminated by back washing or by separating of heterotrophic denitrification from sulfur-utilizing denitrification.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.385-394
• /
• 2016

A fabric excavated from tombs or passed down is not easy to find its original color as it degrades and discolors by UV and visible rays, oxygen and microorganisms. LC-MS analysis is commonly used for separating and analyzing colors, but color extraction process is complicated and important in dye-qualitative analysis. To extract red colors from a fabric which is dyed with safflower and lac, solvents; hydrogen chloride, pyridine and oxalic acid are used and oxalic acid was the most effective solvent. Meanwhile, dyed samples were put in degradation condition; UV-A for 168 hours and analyzed with LC-MS to find out its colors'chemical changes. As a result, carthamin is detected in $T_R$ 13 min and laccaic acid A is detected in $T_R$ 10 min. However carthamin is not detected in a degraded fabric dying with safflower, it could be identified as a safflower fabric by the molecular weight of m/z 931. Through this study the most optimal method for red color extraction is found so it is expected to be used as a base line data for red color LC-MS analysis.