• 한국멀티미디어학회논문지
• /
• 제8권9호
• /
• pp.1177-1186
• /
• 2005

키보드나 조이스틱 대신 카메라를 통해 입력되는 사용자의 제스처를 이용하는 시각 기반 비디오 게임 인터페이스를 사용할 때 자연스러운 동작을 허용하기 위해서는, 연속 제스처를 인식할 수 있고 사용자의 의미없는 동작이 허용되어야 한다. 본 논문에서는 비디오 게임 인터페이스를 위한 인식과 분할을 결합한 제스처 인식 방법을 제안하며, 이는 주어진 연속 영상에서 의미있는 동작을 인식함과 동시에 의미없는 동작을 구별하는 방법이다. 제안된 방법을 사용자의 상체 제스처를 게임의 명령어로 사용하는 1인칭 액션 게임인 Quke II 게임에 적용한 결과, 연속 제스처에 대해 평균 $93.36\%$의 분할 결과로써 비디오 게임 인터페이스에서 유용한 성능을 낼 수 있음을 보였다.

• 한국통신학회논문지
• /
• 제25권1B호
• /
• pp.62-70
• /
• 2000

본 논문에서는 지능형 차량에서 사용되는 레이더 센서 사이의 상호 간섭 억제 방법을 제안한다. 이 연구는 표준화된 펄스형 레이더에서 동기형 간섭 신호의 억제 방안에 관한 것이다. 레이더 펄스의 방사는 ON-OFF 제어되며, OFF 구간에서 수신된 간섭 신호는 각 레이진 별로 분석되어 저장되며 이를 이용하여 ON 구간에서의 거짓 반사파의 위치를 예측하며, 이로써 ON 구간에서의 동기형 간섭 신호를 제거한다. I-Q 변복조 방식의 레이더 시스템에서, Rayleigh 분포와 Rician 분포의 잡음에서의 오경보 확률과 미탐지 확률을 유도하였다. 펄스 신호 유무의 판별 시의 임계값을 적응적으로 조절함으로써 오경보 확률은 감소시키고 미탐지 확률의 저하를 억제하는 방법을 제시하였으며, 시뮬레이션 결과 오경보 확률은 최고 10\sup 4\배 감소하였고 미탐지 확률의 저하는 무시할 정도였다.

• 대한기계학회논문집B
• /
• 제25권5호
• /
• pp.653-659
• /
• 2001

This paper is concerned with the development of a new method for making and separating ice in-water and saving floated ice by installing an evaporation panel in an ice storage tank. The new method shows very good heat transfer efficiency than that of the convectional method. It is because the evaporation panel is directly contacted with water in the storage tank. The experiments were performed by varying inlet and outlet refrigerant temperatures of its evaporator. From the experimental results, the operating characteristics of in-water harvest-type ice storage system were investigated by measuring temperature and pressure at each point of the ice storage system and power required to operating compressor respect to the changes of the inlet and outlet refrigerant temperature of evaporator. It can be think that defrost frequency decreased and heavy ice created as the refrigerant temperature of evaporator outlet and defrost setting temperature is low so gotten result can effect to release efficiency. Also, consumption power, condensing heat quantity, refrigerating capacity and performance efficiency decreased as time goes by. Therefore, these results provide the basic data for system optimization, performance improvement and the possibility of application to other fields.

• 분석과학
• /
• 제8권4호
• /
• pp.865-868
• /
• 1995

The method of matrix-assisted laser desorption ionization mass spectrometry has been used to solve some bioanalytical problems, which is difficult to analyse by general methods. For the selection of proper laser wavelength and matrices, eight matriees was used with laser wavelength of 226 and 355nm. The result shows that with wavelength of 355nm better results could be obtained with most of the matrices. The molecular weight of eytochrome C, which was seperated by gel electrophoresis and electro-blotted onto NC membrane is determined by MALDI. The accuracy is better than 0.1%, which is much higher than that of SDS-PAGE. Protein mixture extracted from crude peanut oil is directly determined by MALDI. The molecuiar weight of its three components are determined, and the result also demonstrated that these proteins are in free manner. As proteins arc in 2S bond, with the traditional method, SDS-PAGE, it is not able to decide whether protein exists in combination mode or in free manner. In the technique of two phase aquesous solution, which is used for separating biomaterials, water soluble polymers stained with dyes are used in this technique. By the use of MALDI the number or the dye molecules react with the polymer PEG molecule are determined, and that is difficult to determined by other methods.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권9호
• /
• pp.531-538
• /
• 2005

This paper proposes an expert system which is able to enhance the accuracy and productivity by determining the test strategy based on heuristic rules for test of the hybrid electronic circuit board producted massively in production line. The test heuristic rules are obtained from test system designer, test experts and experimental results. The guarding method separating the tested device with circumference circuit of the device is adopted to enhance the accuracy of measurements in the test of analog devices. This guarding method can reduce the error occurring due to the voltage drop in both the signal input line and the measuring line by utilizing heuristic rules considering the device impedance and the parallel impedance. Also, PSA(Parallel Signature Analysis) technique Is applied for test of the digital devices and circuits. In the PSA technique, the real-time test of the high integrated device is possible by minimizing the test time forcing n bit output stream from the tested device to LFSR continuously. It is implemented in Visual C++ computer language for the purpose of the implementation of the inference engine using the dynamic memory allocation technique, the interface with the electronic circuit database and the hardware direct control. Finally, the effectiveness of the builded expert system is proved by simulating the several faults occurring in the mounting process the electronic devices to the surface of PCB for a typical hybrid electronic board and by identifying the results.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1314-1319
• /
• 2017

A handheld sheet resistance meter that can easily and quickly measure the sheet resistance of indium tin oxide films was developed. The dual-configuration four-point probe method was adopted for this instrument, which measured sheet resistance in the range from $0.26{\Omega}/sq$. to $2.6k{\Omega}/sq$. with 0.3 % ~ 0.5 % uncertainty. The screen of the instrument displayed the sheet resistance when the probe was in contact with the sample surface and the value continued to be displayed during the probe contact. Even after separating the probe from the surface, the value was still displayed on the screen and could be read easily. A feature of the instrument was the use of the dual-configuration technique to reduce edge effects markedly compared with the single-configuration technique and its ease of operation without applying correction factors for sample size and thickness.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제15권4호
• /
• pp.294-298
• /
• 2009

본 연구에서는 에지 성분의 추출을 보다 섬세하게 처리함으로써 이미지 화질을 개선하기 위한 방법을 제안한다. 제안 방법은 고전적인 보간을 응용한 ESII(Edge Sensitive Image Interpolation)으로 보간 커널 식에서 고정된 매개 변수를 사용하지 않고 주변 화소 값으로부터 적절한 정보를 얻어내서 매 화소마다 매개변수를 변화시킨다. LSE(Least Square Error)를 이용하여 CME(Camera Modelling Error)를 최소화 하도록 보간 할 화소 값을 결정함으로써 이미지를 복원하며, 기존 방법에 비교하여 객관적, 주관적 화질이 우수함을 실험, 제시하였으며 또한 영상을 1차원 정보로 분리하여 고려한 결과 계산상의 복잡도를 줄이는 효과를 기대할 수 있다.

• 자동차안전학회지
• /
• 제13권4호
• /
• pp.66-72
• /
• 2021

This study was initiated to improve of the defect investigation method using event data recorders (EDR) and suggested a solution through the regulation and system analysis of EDR. The EDR data has been used for various purposes such as the vehicle defect investigation and the traffic accident investigation. However the EDR regulation has not been updated since the implementation in 2012. "Trigger Threshold" can be used to analyze a single accident such as the frontal crash, the side crash, and the rollover. In the case of a complex accident in which a rollover accident and a crash accident occur simultaneously, it is difficult to analyze a complex accident due to current "Trigger Threshold". This study proposed the method of separating the "Trigger Threshold" into a crash accident and a rollover accident so that accidents can be analyzed using the EDR data even when a complex accident occurs. In addition, it proposed the improvement method to quickly use the data of EDR in accident reconstruction software.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권1호
• /
• pp.50-59
• /
• 2022

There are several methods for separating the baseflow from the hydrograph, and graphical methods (GM) have mostly been used. GMs are those that separate the baseflow from the direct flow simply by connecting rising point with inflection point or points related to some duration from a hydrograph. Environmental tracer method (ETM) is another tool researched and developed under several conditions to estimate the groundwater recharge. The goal of this study is to separate the baseflow component from a storm hydrograph by applying various GMs and ETM, and to compare their results. The baseflow component estimated by ETM was different from the results by GMs in terms of their shapes of fluctuation and flow rates. Another important feature is that the form of the baseflow to which ETM is applied is similar to that of a storm hydrograph. This similarity is presumed to be due to the selection of tracer that respond quickly to rainfall.

• Journal of Multimedia Information System
• /
• 제9권2호
• /
• pp.87-92
• /
• 2022

In this study, we aimed to illustrate that the thresholding method gives different results when tested on the original and the refined histograms. We use the global thresholding method, the well-known image segmentation method for separating objects and background from the image, and the refined histogram is created by the neighborhood distinction metric. If the original histogram of an image has some large bins which occupy the most density of whole intensity distribution, it is a problem for global methods such as segmentation and contrast enhancement. We refined the histogram to overcome the big bin problem in which sub-bins are created from big bins based on distinction metric. We suggest the refined histogram for preprocessing of thresholding in order to reduce the big bin problem. In the test, we use Otsu and median-based thresholding techniques and experimental results prove that their results on the refined histograms are more effective compared with the original ones.