• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.590-595
• /
• 2004

Turbo fan as an air moving device is widely used for its silent characteristics and high efficiency relative to the other centrifugal multi blade impeller. In general, turbo fan is installed with a scroll casing for energy conversion from kinetic one to pressure energy. However, a turbo fan without scroll casing is considered as a present model that is proposed model for compact design of a product In detail, the model has only 4 cutoffs as guiders for 4 separated outlets. Specially, equal distribution of flow rate generated by the model blower is main interest in this investigation. The optimal position of the guider is found by reducing abnormal flows such as reverse flow in each outlet.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2033-2038
• /
• 2008

The CPLs(capillary pumped loops) are two phase heat transfer devices which enable active control of operating temperature of heat absorbing elements(or evaporators). Although the CPLs gain increasing interests as promising heat transfer devices for future missions such as spacecraft and commercial applications, their intrinsic complexity in operating principles makes the widespread use of these devices difficult. The key element and main cause of this complexity in operating principles is the two phase hydrodynamic accumulator or reservoir which controls the saturation state of the remaining loop and, particularly for the CPLs, it is separated from the evaporator. Thus, in this study, the operating characteristics of the CPL is investigated experimentally and theoretically. Mainly focusing on the role of reservoir the thermodynamic operating principle is examined first and the experimentally obtained steady state and transient state operating characteristics are discussed in detail.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.6
• /
• pp.270-275
• /
• 2005

In order for the application of the in-vivo endoscopic biopsy, a micromirror which can be driven at a low voltage is required. In this paper, a two-step micromirror composed of bottom electrodes, moving plate and top mirror plate is proposed. Because an electrical wiring of two plates are separated, they can be actuated separately. Therefore, an intermediate moving plate plays an important role in reducing the driving voltage in half. The designed device was fabricated by the surface micromachining. Maximum rotation angle of $6.3^{\circ}$ was obtained by applying DC 48V, while a conventional one-step mirror pulled down at DC 120V. The designed structure can be used in microphotonic applications requiring low driving voltage.

• Journal of information and communication convergence engineering
• /
• v.17 no.2
• /
• pp.97-104
• /
• 2019

Distributed mobility management (DMM) does not use a centralized device. Its mobility functions are distributed among routers; therefore, the mobility services are not limited to the performance and reliability of specific mobility management equipment. The DMM scheme has been studied as a partially distributed architecture, which distributes only a packet delivery domain in combination with the software defined network (SDN) technology that separates the packet delivery and control areas. Particularly, a separated control area is advantageous in introducing a new service, thereby optimizing the network by recognizing the entire network situation and taking an optimal decision. The SDN-based mobility management scheme is studied as a method to optimize the packet delivery path whenever a mobile node moves; however, it results in excessive signaling processing cost. To reduce the high signaling cost, we propose a hybrid distributed mobility management method and analyze its performance mathematically.

• Journal of information and communication convergence engineering
• /
• v.20 no.1
• /
• pp.16-21
• /
• 2022

In this research, we create a network infrastructure based on a service-oriented infrastructure (SOI) for the virtualization technology and integrate it with a cloud technology that applies the cloud integration management platform (CIMP) concept. In CIMP, the server and storage will be separated. The server will be adopted for virtualization while the storage will be used by students and teachers to store data. As long they save their data in the storage module, every time, everywhere, and on every device, they can access their data. This research will implement the design of the network infrastructure and be applied to the remote practical learning system in the laboratory. Students and teachers will ultimately adopt this network infrastructure for remote practice using their respective devices without physically meeting in the laboratory. In the future, if the implementation phase is successful, then in addition to laboratory environments, it can be implemented in all learning activities at our campus.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.4
• /
• pp.344-351
• /
• 2023

Static ejection tests were conducted using the 2,000lb-Class Store to provide ejector model for the store separation simulation. In this study, static ejection test device for 2,000lb-class store was constructed and reaction force applied to store was measured over time. In addition, the trajectories of the ejected store were obtained using photogrammetry and compared with the simulations using developed ejector model. The results of the static ejection test were analyzed to determine the cartridge-orifice combination to be used for store separation. Flight tests were performed by applying the analysis results and verified that the store was safely separated from the aircraft.

• Journal of the Korean Vacuum Society
• /
• v.15 no.2
• /
• pp.223-230
• /
• 2006

We have investigated the characteristics of hydrogen (H) plasma treated quantum dot infrared photodetectors (QDIPs). The structure used in this study consists of 3 stacked, self assembled $In_{0.5}Ga_{0.5}As/GaAs$ QD layer separated by GaAs barrier layers that were grown by molecular beam epitaxy. Optical characteristics of QDIPs, such as photoluminescence (PL) spectra and photocurrent spectra, have been studied and compared with each other for the as grown and H plasma treated QDIPs. H plasma treatment, resulted in the splitting of PL peak, which can be attributed to the redistribution of the size of QDs. The activation energies estimated from the temperature dependence of integrated PL intensity for as grown and H plasma treated QDIPs are found to be in good agreement with those determined from corresponding peaks of photocurrent spectra. It is also noted that photocurrent is detected up to 130 K for the H plasma treated QDIP, suggesting the future possibility for the development of infrared photodetectors with high temperature operation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.129-136
• /
• 2012

Temperature of fresh concrete can be effectively used to predict the strength of concrete being cured and make an informed decision for stripping the molds. A hygrothermograph and thermo-couple sensors that require an extensive wiring have been applied to measure a temperature of concrete at the early stage of the curing process on site. However, these methods have limits to provide the temperature data in real time due to harsh working environment including frequent cutting of wires. Therefore, this study is aiming at developing a device based on wireless sensor network to measure the temperature of concrete being cured in formwork. The result showed that the wireless sensor with probe type thermistor which is developed had the same temperature data compared to the existed wire type thermistor, and we confirmed the temperature history of concrete in real time for 28 days throughout the gateway by wireless network that collects the temperature data measured from specimens in laboratory. Also, the network device for transmission can be easily separated from the probe sensor part and reused consistently. If the wireless sensor network device developed uses in the field, the temperature management of concrete will be systematically conducted from at the early stage of the curing, and especially be effective for cold weather concrete construction. In addition, it will contribute to the establishment of advanced quality control system for concrete and productivity of supervisors on site will be increased in the future.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.12
• /
• pp.42-53
• /
• 2011

As IT industry using networks have been developed explosively, online operations that were conducted in offline are increasing rapidly, and even relationship with other people made online. As online crimes are increasing accordingly, building security networks is getting very important. As a result, network separation between business and organization network has been performed recently, but this causes network user inconvenience and efficiency reduction. In this paper, we propose reassociation methods for already separated networks for many public organizations. We implement two reassociation methods using NAT device and shared storage and show their experimental results.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.5
• /
• pp.9-16
• /
• 2004

The data link layer of the PCI Express must have the transmitting buffer that contains the packets to transmit next time. Also it must have the retry buffer that contains the packets which were already transmitted but have not been acknowledged by the corresponding target device. In the separated buffer architecture, the data link layer can not transmit the packets in the transmitting buffer if the reiry buffer space is not enough. In this paper, we propose an efficient buffer architecture which merges the transmitting buffer and the retry buffer to a single buffer. Since the proposed buffer can dynamically assign the size of the transmitting buffer and the retry buffer, it can improve the buffer usage efficiency and the data transfer efficiency. The simulation result shows that the proposed buffer has the higher data transfer efficiency than the separated buffer architecture about 39% when the total buffer size is 8K byte.