• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.929-930
• /
• 2012

• Journal of Applied Reliability
• /
• v.10 no.1
• /
• pp.65-71
• /
• 2010

NAND-type SONOS with a separated double-gate FinFET structure (SDF-Fin SONOS) flash memory devices are proposed to reduce the unit cell size of the memory device and increase the memory density in comparison with conventional non volatile memory devices. The proposed memory device consists of a pair of control gates separated along the direction of the Fin width. There are two unique alternative technologies in this study. One is a channel doping method and the other is an oxide thickness variation method, which are used to operate the SDF-Fin SONOS memory device as two-bit. The fabrication processes and the device characteristics are simulated by using technology comuter-adided(TCAD). The simulation results indicate that the charge trap probability depends on the different channel doping concentration and the tunneling oxide thickness. The proposed SDG-Fin SONOS memory devices hold promise for potential application.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.10
• /
• pp.916-921
• /
• 2016

It is possible for humans to breathe underwater using dissolved oxygen. However, unlike fish, humans need large amounts of oxygen to breathe underwater. Water generally contains small amounts of dissolved oxygen. To get enough dissolved oxygen from water, great volumes of it should be supplied into a separation device. If exhalation gases are used, the amounts of water supplied into the membrane can be decreased. However, the characteristics of exhalation gases after passage through the separation device need to be investigated. To reuse the exhalation gases, the concentration of carbon dioxide should be decreased. A compressor is needed to supply the exhalation gases because of the high pressure generated in the membrane inlet. However, compressors require a lot of power and are heavy, so it is not proper to get the portable separation device. A system without the compressor is needed. If the pressure of the position mixed from the exhalation is less than atmosphere, the compressor is not needed. In this thesis, characteristics of the gases which are mixed with exhalation gases and separated from water after passing the membrane are investigated. The compositions of carbon dioxide, oxygen, and nitrogen are measured with the gas chromatography. The effects of water and exhalation gas flow rates on characteristics of gases separated from water after the membrane are showed.

• Journal of the Speleological Society of Korea
• /
• no.89
• /
• pp.27-33
• /
• 2008

Solar energy is most green and clean, unlimited and sustainable energy source on the earth. It is almost 97% of imported consumer energy in Korea. Because of resource poor nation, it is necessary to do their best to make alternative energy to allot their deficiency of the matter in hand of energy resources of petroleum. In a point of view of this problems, the natural solar energy should be improved by any methods as much, possible as we need. Photovoltaic generation with solar tracking system for obtaining optimal power is one of most benefit equipment to improve power of solar-cell panel producing clean electric power efficiently. Solar tracker is a device for orienting a solar photovoltaic panel toward the sun perpendicularly to sunlight, especially in widely separated place. For this reason, we are very interested in developing the equipment system of tracker, specially in solar cell applications, obtaining a high degree of accuracy to ensure that the optimal sunlight could be directed precisely against to the powered device. As a result, it was obtained of 12.46 volts at 90$^\circ$toward solar panel and 9.44 volts at 45$^\circ$, furthermore, improved efficiency more than 30% of average output voltage between tracker system (12.41V) and fixed system (8.55V), respectively. It is also very useful for optimum power system of widely separated cave.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.5
• /
• pp.544-551
• /
• 2013

Recently high speed mixer, which is mixing, grinding, dispersion for liquid-liquid material, has been widely used several industries such as food, cosmetics, pharmaceuticals, fine chemicals, electronic material. This high speed mixer has a core element part called particle separation device. Particle separation device, which makes mixed liquid and liquid material using shear forces from a rotor and a stator, is a decisive factor in the distributed parts. In this study, we examined the velocity distribution of the two models of particle separation device using computation fluid dynamics, so that we were able to see the difference of the velocity distribution according to the shape. Also, by experiment, we observed that the use of rotor-screen type is deemed more suitable in case of accurately considering the effect of improving of the dispersibility through the circulation of the future.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.2
• /
• pp.156-163
• /
• 2008

We proposed a new $p^+/n^+$ gate locally-separated-channel (LSC) bulk FinFET which has vertically formed oxide region in the center of fin body, and device characteristics were optimized and compared with that of normal channel (NC) FinFET. Key device characteristics were investigated by changing length of $n^+$ poly-Si gate ($L_s$), the material filling the trench, and the width and length of the trench at a given gate length ($L_g$). Using 3-dimensional simulations, we confirmed that short-channel effects were properly suppressed although the fin width was the same as that of NC device. The LSC device having the trench non-overlapped with the source/drain diffusion region showed excellent $I_{off}$ suitable for sub-50 nm DRAM cell transistors. Design of the LSC devices were performed to get reasonable $L_s/L_g$ and channel fin width ($W_{cfin}$) at given $L_gs$ of 30 nm, 40 nm, and 50 nm.

• Journal of Biomedical Engineering Research
• /
• v.40 no.5
• /
• pp.151-157
• /
• 2019

An acoustofluidic device using conductive liquid-based electrodes was developed for malaria parasite separation from white blood cells. In this device, the electrode channels filled with a conductive liquid were used to generate standing surface acoustic waves (SSAWs) in a fluidic channel, which can overcome the limitation of conventional patterned metal electrodes. Separation performance of the device was evaluated using fluorescent polystyrene particles with two different sizes (2 and $10{\mu}m$ diameters), which were successfully separated. In addition, a mixture of malaria parasites and white blood cells were also efficiently separated with high purity of ~98% in the CL-SSAW device at the flow rate of $12{\mu}l/min$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.493-494
• /
• 2006

We have demonstrated highly efficient WOLED with two separated emissive layers using a blue fluorescent dye and a red phosphorescent dye. we also obtain stable $CIE_{x,y}$ coordinates with two-layered WOLEDs. The device structure was ITO/2-TNATA/NPB/two separated emissive layers/Bphen/Liq/Al. The maximum luminous efficiency of the device was 11.6 cd/A at $20\;mA/cm^2$ and $CIE_{x,y}$ coordinates varied from (x = 0.33, y = 0.37) at 6V to (x = 0.28, y = 0.35) at 14V.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.653-656
• /
• 2003

We have designed embedded web sewer system and ported Linux operating system version 2.4.5 at our system. And then We implemented to control and monitor widely separated hardware and implemented to monitor widely separated image using CMOS image sensor HV7131B. Web server is the Boa web server with General Public License. We designed for this system using of Intel's SA1110 ARM core base processor and connecting input and output device at GPIO port of SA1110. Device driver of General purpose I/O for Embedded Linux OS is designed. And then the application program controlling driver is implemented to use of common gate interface C language. User is available to control and monitor at client PC. This method have benefit to reduce the Expenditure of hardware design and development time against PC base system and have various and capacious application against firmware base system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.441-451
• /
• 2019

When a store is launched, the umbilical plug should be separated from the launcher without any physical interference and fragments. In order to satisfy these conditions, an umbilical plug and an umbilical separating device were designed. The plug is separated from the receptacle of the store while moving along inclined planes by the store thrust and the spring force connected from the launcher to the plug. As a result of the prototype test, the hanger on the store collided with the plug. Several tests were conducted after some actions were taken to prevent the collision. However, not only the same phenomenon was repeated, but also fragmentation occurred. In this study, the non-colliding conditions were analyzed through rigid and flexible multi-body dynamics analysis.